New Products

Displaying 1 to 20 (of 431 products)
AHL925-20E: 1 mT, 1.5V, WLCSP GMR Switch Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AHL925-20E high-sensitivity (1 mT), low-voltage (1.5 V), wafer-level chip-scale packaged GMR Switch sensor. The chip has an open drain output that is activated when the magnetic field exceeds the one mT magnetic field threshold.

The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

Part Number:
AHL925-20E-EVB01
Quantity in Stock:
30

$29.95

ACT001-10E-EVB01: 500 mA DFN6 TMR Current Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ACT001-10E TMR analog bridge current sensor. The sensor has an on-chip current strap for precise operation.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 14 V supply and provides a differential output voltage proportional current.

Part Number:
ACT001-10E-EVB01

$19.95

AAL024-10E-EVB01: 1.5 mT DFN6 GMR Magnetometor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAL024-10E 1.5 mT saturation, low hysteresis GMR analog bridge magnetometer. Its cross-axis sensitivity makes it ideal for noncontact current sensing, which can be evaluated using this board.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field or current.

Part Number:
AAL024-10E-EVB01

$19.95

AKT001-14E-EVB01: 1.5 T DFN4 TMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AKT001-14E high-field (1.5 T), low power TMR analog bridge magnetometer. The sensor is an ultraminiature 1.1 x 1.1 mm package.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AKT001-14E-EVB01

$19.95

AAL002-02E-EVB01: 1.5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAL002-02E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAL002-02E-EVB01

$19.95

AAH004-02E-EVB01: 1.5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAH004-02E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAH004-02E-EVB01

$19.95

AAH004-00E-EVB01: 1.5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAH004-00E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAH004-00E-EVB01

$19.95

AAH002-02E-EVB01: 1 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAH002-02E ultrahigh-sensitivity 0.6 to 3 mT linear range GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAH002-02E-EVB01

$19.95

AA007-02E-EVB01: 50 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA007-02E 50 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-02E-EVB01

$19.95

AA006-02E-EVB01: 5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA006-02E 5 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-02E-EVB01

$19.95

AA006-00E-EVB01: 5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA006-00E 5 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-00E-EVB01

$19.95

AA005-02E-EVB01: 10 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA005-02E 10 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA005-02E-EVB01

$19.95

AA004-02E-EVB01: 5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-02E 5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA004-02E-EVB01

$19.95

AA004-00E-EVB01: 5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-00E 5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA004-00E-EVB01

$19.95

AA003-02E-EVB01: 2 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA003-02E 2 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA003-02E-EVB01

$19.95

AA002-02E-EVB01: 1 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA002-02E 0.15 to 1.05 mT GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA002-02E-EVB01

$19.95

SM324-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM324-10E 0 to 1.5 mT precision Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has a sophisticated I2C interface.

Part Number:
SM324-10E-EVB01

$19.95

SM228-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM228-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use I2C interface and a digital threshold output.

Part Number:
SM225-10E-EVB01

$19.95

SM225-10E-EVB01: SPI 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM225-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use SPI interface.

Part Number:
SM225-10E-EVB01

$19.95

SM223-10E-EVB02: I2C 1.5 mT TMR Smart Current Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) noncontact current sensor evaluation board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor configured over a current-sensing circuit board trace. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM223-10E-EVB02

$19.95

Displaying 1 to 20 (of 431 products)