New Products

Displaying 1 to 20 (of 408 products)
ADL922-14E: 4 mT, 3V Nanopower GMR Switch, DFN4

NVE's ADL922-14E Ultrasensitive Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: Ultrasensitive 4 mT operate point Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm DFN4 package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL922-14E
Quantity in Stock:
2960

$5.63

IL7614V-01: Isolated 3-Ch SPI w/Integ DC-DC Conv Eval Board

This Evaluation Board provides a complete isolated three-channel SPI node, plus isolated power, using an IL7614VE. It is ideal for half-duplex SPI applications.

These 2 x 3.5-inch (50 x 90 mm) boards also include screw terminal and test pads, and uses a 2s2p board with vias for optimal thermal performance. LEDs indicate DC-to-DC convertor input and output power.

The IL7614V is a high-speed, fully-isolated, data couplers with an integrated, one-quarter watt 3.3 V-to-3.3 V DC-to-DC convertor. This level of integration dramatically reduces chip count and board area.

Part Number:
IL7614V-01
Quantity in Stock:
1

$84.95

ILDC13V-15E: Isolated 1/4W 3.3-to-6V DC-DC Conv, 2.5 kV, DFN6

The ILDC13V-15E is a one-quarter watt fully-regulated 3.3V-to-6V DC-DC boost convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The "V" suffix indicates an extended creepage package and full 2.5 kV isolation.

The part can be used to power high-side gate supplies in H-bridges.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide virtually unlimited barrier life.

Part Number:
ILDC13V-15E
Quantity in Stock:
76

$5.43

ILDC12V-15E: Isolated 1/4W 3.3-to-5V DC-DC Conv, 2.5kV

The ILDC12-15E is a one-quarter watt fully-regulated 3.3V-to-5V DC-DC boost convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The "V" suffix indicates an extended creepage package and full 2.5 kV isolation.

The part can be used to generate isolated RS-485 bus supplies or to power high-side gate supplies in H-bridges.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide virtually unlimited barrier life.

Part Number:
ILDC12V-15E
Quantity in Stock:
466

$5.43

IL717V-01: 4-Ch (3/1 dir) Wide-Body 7 kV Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL717VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.

Part Number:
IL717V-01
Quantity in Stock:
50

$49.95

IL716V-01: 4-Ch (2 ea dir) Wide-Body 7 kV Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.

Part Number:
IL716V-01
Quantity in Stock:
50

$49.95

ILDC11V-15E: 1/4W 3.3-to-3.3V DC-DC Conv, 2.5 kV, DFN6

The ILDC11V-15E is an ultraminiature, one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The "V" suffix indicates an extended creepage package and full 2.5 kV isolation.

The part can be used to generate isolated RS-485 bus supplies or isolated analog supplies for ADC and DAC circuits.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide virtually unlimited barrier life.

Part Number:
ILDC11V-15E
Quantity in Stock:
1213

$5.98

ADK991-14E: 350 mT, 3V Nanopower TMR Switch, ULLGA

The ADK991-14E Nanopower Switch integrates TMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 350 mT Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: MRI Detection Battery-Powered Devices Portable Instruments Wearables

Part Number:
ADK991-14E
Quantity in Stock:
50

$17.05

IL4822-01: Isolated RS-485 Xcvr w/5V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4822E isolated transceiver with integrated DC-to-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4822E is a high-speed, fully-isolated, full-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 5 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4822-01
Quantity in Stock:
50

$84.95

IL4685-01: Isolated RS-485 Xcvr w/3 V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4685-01
Quantity in Stock:
100

$84.95

IL710S-1-01: 150 Mbps 1-Ch MSOP Isolator Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards have an IL710S-1E 150 Mbps single-channel (all the same direction) ultraminiature MSOP8 isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest isolators.

Part Number:
IL710S-1-01
Quantity in Stock:
50

$49.95

IL716-01: 4-Ch  (2 ea dir) Wide-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716E four-channel (two each direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL716-01
Quantity in Stock:
50

$49.95

IL715-01: 4-Ch  (all same dir) Wide-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715E four-channel (all the same direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL715-01
Quantity in Stock:
50

$49.95

IL717-1-01: 4-Ch (3-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL717-1E ultraminiature four-channel (three transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL717-1-01
Quantity in Stock:
50

$49.95

IL716-1-01: 4-Ch (2 ea dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716-1E four channel (two each direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's smallest high-performance isolators.

Part Number:
IL716-1-01
Quantity in Stock:
50

$49.95

IL261-1-01: 5-Ch (4-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL261-1E ultraminiature five-channel (four transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL261-1-01
Quantity in Stock:
50

$49.95

IL260-1-01: 5-Ch (all same dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL260-1E ultraminiature five-channel (all the same direction) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL260-1-01
Quantity in Stock:
50

$49.95

IL611-3-01: IL611-3E 2-Ch (both same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL611-3E two-channel (both the same direction) SOIC8 passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL611-3-01
Quantity in Stock:
50

$49.95

IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow

These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL614-3-01
Quantity in Stock:
50

$49.95

IL613-01: IL613E 3-Ch (all same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL613E three-channel (all the same direction) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL613-01
Quantity in Stock:
50

$49.95

Displaying 1 to 20 (of 408 products)