New Products

Displaying 1 to 20 (of 446 products)
ADT005-10E-EVB01: TMR Rotation Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ADT005-10E ultralow power quadrant rotation sensor. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine digital quadrature outputs.

Part Number:
ADT005-10E-EVB01
Quantity in Stock:
57

$19.95

ADT001-10E-EVB01: TMR Rotation Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ADT001-10E quadrant rotation sensor. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine digital quadrature outputs.

Part Number:
ADT001-10E-EVB01
Quantity in Stock:
30

$19.95

ALT521-10E-EVB01: Ultrasensitive Two-Axis Rotational Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT521-10E 2 MOhm Tunneling Magnetoresistance (TMR) Ultrasensitive Two-Axis Rotational Sensor.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.

Part Number:
ALT521-10E-EVB01
Quantity in Stock:
52

$19.95

ALT521-10E: Ultrasensitive Two-Axis Rotational Sensor, DFN6

ALT521-10E Rotational Sensors are Tunneling Magnetoresistance (TMR) Wheatstone bridge sensors with large voltage signal, wide linear range, and ultraminiature package size. The sensor has two half-bridge outputs for absolute angle detection or both X- and Y-axis magnetic field detection. The outputs are bipolar, meaning they are positive for a positive field and negative for a negative magnetic field polarity. Key specifications are:
  • High sensitivity (140 mV/V/mT)
  • ±0.5 mT linear range
  • Highly linear output (typ. 2% of full scale)
  • Low temperature coefficient of output (0.1%/°C)
  • 100 kHz frequency bandwidth
  • 2 megohm typ. device resistance for low power
  • Operation to near-zero supply voltage
  • Up to 125 °C operating temperature
  • 2.5 x 2.5 mm DFN6 package

Part Number:
ALT521-10E
Quantity in Stock:
3990

$8.94

ADT002-10E-EVB01: TMR Rotation Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ADT002-10E low-hysteresis quadrant rotation sensor. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine digital quadrature outputs.

Part Number:
ADT002-10E-EVB01
Quantity in Stock:
30

$19.95

SHIELD02: Off-Axis Angle Sensor Demonstration and Development Board

Shield02 demonstrates and allows you to evaluate NVE's unique tunneling magnetoresistance (TMR) angle and rotation sensors. Unlike competitive sensors, NVE's ALT521, AAT-, ADT- and ASR-Series angle/rotation sensors are ideal for off-axis angle sensing. The board is in the form of a Shield, compatible with microcontroller boards such as Arduino Uno. SHIELD02 connects via an edge connector to a sensor breakout board. Sixty LEDs indicate the angle, and colors indicate direction of rotation.

A diametrically-magnetized neodymium magnet is included, and a magnet fixture allows the magnet to be positioned on-axis or in one of four off-axis angle sensing zones.

Arduino not included; breakout boards sold separately. The Shield is compatible with the following breakout boards:

  ALT521-10E-EVB01: Ultrahigh sensitivity analog angle sensor
  AAT001-10E-EVB01: Low-power analog angle sensor
  AAT003-10E-EVB01: Low output impedance analog angle sensor
  AAT006-10E-EVB01: High-sensitivity analog angle sensor
  AAT009-10E-EVB01: Ultralow-power analog angle sensor
  AAT101-10E-EVB01: Full-bridge low-power analog angle sensor
  ADT001-10E-EVB01: Robust digital output quadrature rotation with fault sensor
  ADT002-10E-EVB01: Precision digital output quadrature rotation sensor with low hysteresis
  ADT005-10E-EVB01: Standard digital output quadrature rotation sensor
  ASR002-10E-EVB01: SPI interface factory-calibrated angle sensor
  ASR012-10E-EVB01: I²C interface factory-calibrated angle sensor
  ASR022-10E-EVB01: ABZ encoder sensor

Arduino Software and detailed documentation can be downloaded from NVE's GitHub repository.
Untitled Document

Part Number:
SHIELD02
Quantity in Stock:
49

$59.95

ALT024-10E-EVB01: 0-2 mT TMR magnetometor breakout board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT024-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.

Part Number:
ALT024-10E-EVB01
Quantity in Stock:
41

$19.95

ALT024-10E: 0-2 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT024-10E is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with high sensitivity and wide linear range. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: ±2 mT linear range High sensitivity (120 mV/V/mT typical) Wheatstone bridge magnetometer configuration 0 - 10 V power supply 20 kiloohm device resistance for low power High linearity output (

Part Number:
ALT024-10E
Quantity in Stock:
2926

$12.00

ALT002-14E-EVB01: 0-0.25 mT DFN4 TMR magnetometor breakout board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT002-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.

Part Number:
ALT002-14E-EVB01
Quantity in Stock:
39

$19.95

ALT002-14E: 0-0.25 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, DFN4

The ALT002-14E is an ultraminiature, ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: Tunneling Magnetoresistive Technology (TMR) High sensitivity (200 mV/V/mT typical) Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power ±0.25 mT linear range 1.1 x 1.1 mm DFN4 package –40 to 125°C Applications: Wearables Proximity detection Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics

Part Number:
ALT002-14E
Quantity in Stock:
4758

$12.00

ALT023-10E-EVB04: 50A TMR Current Sensor Evaluation Board

This evaluation board measures zero to seven amps with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.

The board has a sensor plus 1/4" screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.

The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.

The board measures 2.0" x 1.9" x 0.63" (52 x 48 x 1.6 mm)

Part Number:
ALT023-10E-EVB04
Quantity in Stock:
48

$24.95

ALT023-10E-EVB03: 7A TMR Current Sensor Evaluation Board

This evaluation board measures zero to seven amps with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.

The board has a sensor plus screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.

The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.

The board measures 0.9" x 0.5" x 0.063" (22 x 12 x 1.6 mm)

Part Number:
ALT023-10E-EVB03
Quantity in Stock:
50

$24.95

ALT023-10E-EVB02: 1A TMR Current Sensor Evaluation Board

This evaluation board measures zero to one amp with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.

The board has a sensor plus screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.

The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.

The board measures 0.9" x 0.5" x 0.063" (22 x 12 x 1.6 mm)

Part Number:
ALT023-10E-EVB02
Quantity in Stock:
50

$24.95

NVE logo baseball cap, blue

NVE-branded baseball cap, blue with white NVE logo. We know wow to spin baseballs and electrons.

Quantity in Stock:
10

$25.95

NVE logo knit beanie hat, white

Knit beanie hat, white with blue NVE logo. 12 inches long with a 3 inch cuff, 100% acrylic. We know spintronics and how to keep warm in the winter.

Quantity in Stock:
10

$23.95

NVE logo knit pom pom beanie hat, blue

Knit pom pom beanie hat, blue with white NVE logo. 12 inches long with a 3 inch cuff, 100% acrylic. We know spintronics and how to keep warm in the winter.

Quantity in Stock:
10

$24.95

AAL004-10E-EVB01: 1.5 mT DFN6 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAL004-10E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAL004-10E-EVB01
Quantity in Stock:
50

$19.95

ADT925-14E TMR Switch USB business card demonstration

A smart business card that demonstrates the ADT925-14E 1.1 x 1.1 mm DFN4 TMR Switch sensor.

The board can be plugged into a USB TYPE-A connector, such as those on a computer, for power. An LED on the card shows when the sensor is activated. A small neodymium magnet is included to activate the sensor.

You can carry it with you so you're always prepared to demonstrate the high sensitivity, low power, and small size of TMR sensors.

Part Number:
ADT925-14E-EVB02
Quantity in Stock:
57

$19.95

NVE logo coffee cup

NVE-branded "Leaders in Practical Spintronics" 11 oz ceramic mug (NVE is driven by spintronics and caffeine).

Part Number:
Merch-CUP-0001
Quantity in Stock:
18

$13.95

ACT001-10E-EVB01: 500 mA DFN6 TMR Current Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ACT001-10E TMR analog bridge current sensor. The sensor has an on-chip current strap for precise operation.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 14 V supply and provides a differential output voltage proportional current.

Part Number:
ACT001-10E-EVB01
Quantity in Stock:
50

$19.95

Displaying 1 to 20 (of 446 products)