New Products

Displaying 1 to 20 (of 401 products)
ADK991-14E: 350 mT, 3V Nanopower TMR Switch, ULLGA

The ADK991-14E Nanopower Switch integrates TMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 350 mT Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: MRI Detection Battery-Powered Devices Portable Instruments Wearables

Part Number:
ADK991-14E
Quantity in Stock:
50

$17.05

IL4822-01: Isolated RS-485 Xcvr w/5V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4822E isolated transceiver with integrated DC-to-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminal and test point connections, and uses a 2s2p board with vias for optimal thermal performance.

The IL4822E is a high-speed, fully-isolated, full-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 5 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4822-01
Quantity in Stock:
50

$84.95

IL4685-01: Isolated RS-485 Xcvr w/3 V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards also include screw terminal and test point connections, and uses a 2s2p board with vias for optimal thermal performance.

The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4685-01
Quantity in Stock:
100

$84.95

IL710S-1-01: 150 Mbps 1-Ch MSOP Isolator Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards have an IL710S-1E 150 Mbps single-channel (all the same direction) ultraminiature MSOP8 isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest isolators.

Part Number:
IL710S-1-01
Quantity in Stock:
50

$49.95

IL716-01: 4-Ch  (2 ea dir) Wide-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716E four-channel (two each direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL716-01
Quantity in Stock:
50

$49.95

IL715-01: 4-Ch  (all same dir) Wide-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715E four-channel (all the same direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL715-01
Quantity in Stock:
50

$49.95

IL717-1-01: 4-Ch (3-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL717-1E ultraminiature four-channel (three transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL717-1-01
Quantity in Stock:
50

$49.95

IL716-1-01: 4-Ch (2 ea dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716-1E four channel (two each direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's smallest high-performance isolators.

Part Number:
IL716-1-01
Quantity in Stock:
50

$49.95

IL261-1-01: 5-Ch (4-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL261-1E ultraminiature five-channel (four transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL261-1-01
Quantity in Stock:
50

$49.95

IL260-1-01: 5-Ch (all same dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL260-1E ultraminiature five-channel (all the same direction) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL260-1-01
Quantity in Stock:
50

$49.95

IL611-3-01: IL611-3E 2-Ch (both same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL611-3E two-channel (both the same direction) SOIC8 passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL611-3-01
Quantity in Stock:
50

$49.95

IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow

These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL614-3-01
Quantity in Stock:
50

$49.95

IL613-01: IL613E 3-Ch (all same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL613E three-channel (all the same direction) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL613-01
Quantity in Stock:
50

$49.95

IL715-3-01: 4-Ch  (all same dir) Narrow-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-3E four-channel (all the same direction) narrow-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL715-3-01
Quantity in Stock:
50

$49.95

IL610A-1-01: IL610A Passive-In Isolator Eval Board

The 2 x 3.5-inch (50 x 90 mm) boards contains the unique IL610A-1E passive-input, open-drain isolator. A pushbutton and LED demonstrate the remarkable flexibility of this devices. The evaluation board also has an input resistor, input capacitor, power-supply bypass capacitor as recommended, as well as screw connections, test points, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density. The MSOP package is the world's smallest isolator.

The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL610A-1-01
Quantity in Stock:
4

$49.95

IL3685T-01: 40Mbps, 125C Isolated Xcvr Eval Bd, Wide SOIC

These 2 x 3.5-inch (50 x 90 mm) boards include an IL3685TE isolated RS-485 transceiver, a termination resistors, power-supply bypass capacitors as recommended, screw connections, provisions for header pins, and a DB9 bus connector for PROFIBUS.

The IL3685TE is the world's fastest isolated transceiver with data rates to 40 Mbps, is fully PROFIBUS compatible, including the stringent bus differential specifications, and is rated to a full 125C.

Part Number:
IL3685T-01
Quantity in Stock:
50

$49.95

IL715V-01: 4-Ch (all same dir) Wide-Body 7 kV Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.

Part Number:
IL715V-01
Quantity in Stock:
50

$49.95

IL715-1-01: 4-Ch (all same dir) QSOP Isolator Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-1E four-channel (all the same direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL715-1-01
Quantity in Stock:
50

$49.95

ALT021-10E-EVB02: 0-0.25 mT TMR eval board w/amplifier

A 0.5 x 0.3 inch (13 x 8 mm) evaluation board with the ALT021-10E ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a sensor and a 5x amplifier to provide a 2.5 V/V/mT output.

The board can be powered by a 0.9 to 7 V power supply or battery and provides a linear, single-ended output.

Part Number:
ALT021-10E-EVB02
Quantity in Stock:
48

$49.95

ALT025-14E-EVB01: 0-10 mT DFN4 TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT025-14E-EVB01
Quantity in Stock:
5

$19.95

Displaying 1 to 20 (of 401 products)