New Products

Displaying 161 to 180 (of 434 products)
ABL016-10E: 0.3 mm, 2-Bridge Analog Gear-Tooth Sensor, TDFN

NVE's ABL016-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.3 mm apart on the sensor IC, and the two sensors are phase shifted by 0.15 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.300 mm, and phase shift from sensor to sensor is 0.150 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL016-10E
Quantity in Stock:
2900

$6.29

IL7614VE: 3-channel (both same direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7614VE is a three-channel (2 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7614VE
Quantity in Stock:
2889

$11.78

ALT025-14E: 0-10 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, DFN4

The ALT025-14E is an ultraminiature Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with an extraordinary amount of signal. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: Tunneling Magnetoresistive Technology (TMR) Large signals (22.5 mV/V/mT typical) Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power ±10 mT linear range 1.1 x 1.1 mm DFN4 package –40 to 125°C Applications: Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics

Part Number:
ALT025-14E
Quantity in Stock:
2830

$12.00

AB001-02E: 25 mT Sat. Gradiometer, 2.5 KOhm, RoHS SOIC

AB001-02E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing of small gradients over a wide range of magnetic field strength. The devices are sensitive only to gradients, and have low sensitivity to constant magnetic noise. Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 250 20 - 200 0.02 - 0.03 2,500 +/-20% SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AB001-02E
Quantity in Stock:
2744

$6.29

AD084-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD084-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 3.0-6.0 0.7-1.2 21-34 5 0.4 Current Sink BDF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AD084-00E
Quantity in Stock:
2711

$4.89

IL485W: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC (Pb)

The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations.

Part Number:
IL485W
Quantity in Stock:
2519

$14.57

IL711T-1E: 125C 2-Channel (both same direction) Isolator, 1 kV, MSOP

The IL711T-1 is a high temperature, 3.3/5V, dual-channel, unidirectional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711T-1E
Quantity in Stock:
2457

$6.29

AAL002-02E: 1.5 mT Sat. Analog Sensor, 5.5 KOhm, RoHS SOIC

AAL002-02E Normalized Output GMR Field Sensors use a unique high-sensitivity GMR material, making them ideal for low-field applications. They also tolerate extremely high temperatures--up to 150 degrees Celsius. Features: High Sensitivity to Applied Magnetic Fields Low Hysteresis Wheatstone Bridge Analog Output 150 Degrees Celsius Continuous DC to >1MHz Frequency Response Applications: Low Voltage, High Temperature Applications Low-Field Sensing for Magnetic Media Detection Earth's Magnetic Field Detection Current Sensing General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 15 1.5 - 10.5 3.0 - 4.2 5,500 +/-20% SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AAL002-02E
Quantity in Stock:
2437

$9.60

IL712T-1E: 125C 2-Channel (1 each direction) Isolator, 1 kV, MSOP

The IL712T-1 is a high temperature, 3.3/5V dual-channel, bi-directional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL712T-1E
Quantity in Stock:
2374

$6.29

SM125-10E: General-Purpose 4 mT Smart GMR Magnetometer, TDFN6

The SM125-10E Smart Magnetometer combines an omnipolar GMR sensor element with with easy-to-use digital signal processing.

A digital output provides precise, programmable thresholds. An I²C interface provides magnetic field data, as well as a calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.

All commands, data, and coefficients are a single byte, and a slick, elegant data structure lets you get up and running with a minimum of firmware.

Key features include:
  • Can detect magnets more than 50 mm away
  • I²C and digital threshold outputs
  • 0-4 mT linear range
  • 8-bit / 1% output resolution
  • −40°C to +125°C operating range
  • 5% FS accuracy for 0 to 85°C
  • 10 kSps sample rate for fast response
  • 6 mA typical supply current
  • In-plane sensitivity more usable than Hall effect sensors
  • Programmable offset and gain compensation
  • Optional magnet temperature compensation   • 2.2 to 3.6 volt supply
  • Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package

Part Number:
SM125-10E
Quantity in Stock:
2374

$6.88

IL710V-1E: 2.5 kV, 1-Channel Isolator, MSOP

The IL710V-1 is a 3.3V/5V, single channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 2.5 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710V-1E
Quantity in Stock:
2160

$4.27

ADL121-14E: 2 mT, 3V, 30 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL121-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL121-14E
Quantity in Stock:
2139

$5.63

ABL004-00E: 1 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL004-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 1.0 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL004-00E
Quantity in Stock:
2136

$5.19

IL611A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL611A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-3E
Quantity in Stock:
2121

$5.43

IL815TE: 4-Channel (all same direction) Top-of-the-Line Isolator, 2.5 kV, Wide SOIC

The IL815TE is NVE's top-of-the-line four-channel isolator (all same direction), with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique True 8 eight-millimeter creepage 16-pin wide-bodySOIC package.

Part Number:
IL815TE
Quantity in Stock:
2080

$8.40

IL711S-1E: 150 Mbps 2-Channel (both same direction) Isolator, 1 kV, MSOP

The IL711S-1 is a 3.3/5V dual-channel unidirectional 150 Mbps CMOS-compatible isolated buffer with 10 ns propagation delay, 300 ps pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL711S-1E
Quantity in Stock:
1977

$6.29

IL613-3E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Narrow SOIC

The IL613-3E is a 3.3/5V, 3-channel (all in same direction), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop GMR Sensor technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.15" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL613-3E
Quantity in Stock:
1958

$6.99

IL710S-3E: 150 Mbps 1-Channel Isolator, 2.5 kV, SOIC8

The IL710S-3 is a 3.3V/5V, single channel, 150 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 300 ps pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free.

Part Number:
IL710S-3E
Quantity in Stock:
1954

$3.89

ACT001-10E: In-line Analog Current Sensor, DFN6 Package

The ACT001-10E is a high-sensitivity, inline analog TMR current sensor for AC or DC measurements. An integrated current strap senses current, and a TMR bridge sensor element provides a Wheatstone bridge differential output. The output is bipolar and proportional to the current through the strap. The sensor has a -500 mA to +500 mA linear range, with a typical sensitivity of 0.04 mV/V-mA. The part comes in an ultraminiature DFN6 package.

Part Number:
ACT001-10E
Quantity in Stock:
1917

$5.67

AFL100-10E: 1 mT Digital Sw, 1.8 V – 2.5 V, Norm OFF Sinking, TDFN

NVE's AFL100-10E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds (1 mT) Low Power Digital Output Ultraminiature 2.5 mm x 2.5 mm TDFN Package Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL100-10E
Quantity in Stock:
1798

$9.25

Displaying 161 to 180 (of 434 products)