New Products
IL712-1E: 2-Channel (1 each direction) Isolator, 1 kV, MSOP
The IL712-1 is a 3.3/5V, dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.
- Part Number:
- IL712-1E
- Quantity in Stock:
- 14633
$5.83
IL511-1E: 2-Channel Isolator (both same direction), 1 kV, MSOP
The IL511-1 is a 3.3V/5V, dual-channel unidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 1 kVrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. Unique 8-pin MSOP. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL511-1E
- Quantity in Stock:
- 14521
$5.67
IL3185E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Wide SOIC
Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3185E
- Quantity in Stock:
- 14155
$4.04
AAT101-10E: Full-Bridge Angle Sensor, 625 kOhm, TDFN6
AAT101-10E Angle Sensors use a Tunneling Magnetoresistance (TMR)
full-bridges to produce a very high output signal without amplification. The sensors also have a wide
airgap tolerance and high device resistance for low power. Sine
and cosine outputs provide full quadrature.
Key specifications are as follows:
Full-Bridge TMR Angle Sensor
Typ. p-p
Signal
Configuration
Min. Applied
Field
Nonsinusoidality
accuracy
Max. Op.
Temp.
Typ. Device
Resistance
Package
400 mV/V
Full bridge
30 Oe
1.5%
125°C
625 kΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- AAT101-10E
- Quantity in Stock:
- 13880
$8.94
DC001-10E: 3.3V High-Temp Voltage Regulator
The DC001-10E 3.3 V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 3.3V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information
- Part Number:
- DC001-10E
- Quantity in Stock:
- 13847
$2.50
AA004-02E: 5 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC
NVE's AA004-02E Normalized Output GMR Magnetic Field Sensors have a unique ability
to sense static fields and offer unmatched magnetic sensitivity.
General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources.
Typ. Min. Saturation Field (Oe)
Sensitivity (mV/V/Oe)
Output
Comments
Package
20
0.9 - 1.3
Analog Bridge
Low-Field Measurement
SOIC8 (RoHS)
Note: Quantity Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AA004-02E
- Quantity in Stock:
- 13452
$9.60
IL261-1E: 5-Channel (4 transmit, 1 receive) Isolator, 2.5 kV, QSOP
The IL261-1E is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL261-1E
- Quantity in Stock:
- 12962
$8.54
IL3022E: Low-Cost Isolated RS422 Transceiver, 2.5 kV, Wide SOIC
The IL3022E is a cost-effective isolated 4 Mbps RS-422 full-duplex transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL3022E
- Quantity in Stock:
- 12897
$5.05
ADL024-14E: 2.8 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA
NVE's ADL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- ADL024-14E
- Quantity in Stock:
- 12400
$5.63
IL260E: 5-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC
The IL260E is a 3.3/5.0-volt, 5 channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin, wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL260E
- Quantity in Stock:
- 12172
$8.54
IL41050TAE: High-Speed, Low-Power Isolated CAN Transceiver, 2.5 kV, Wide SOIC
The IL41050TAE is a high-speed, low-power isolated ISO 11898 compliant CAN transceiver. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.
- Part Number:
- IL41050TAE
- Quantity in Stock:
- 12167
$3.62
IL3185-3E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC
Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3185-3E
- Quantity in Stock:
- 11812
$4.04
IL41050TA-3E: Isolated High-Speed, Low-Power Isolated CAN Transceiver, 2.5 kV, Narrow SOIC
The IL41050TA-3E is a high-speed, low-power isolated ISO 11898 compliant CAN transceiver. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin narrow-body (0.15'') RoHS SOIC package.
- Part Number:
- IL41050TA-3E
- Quantity in Stock:
- 11358
$3.62
IL3285-3E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC
Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3285-3E
- Quantity in Stock:
- 11294
$4.12
IL514-3E: 3-Channel (2 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC
The IL514-3 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL514-3E
- Quantity in Stock:
- 11160
$6.99
IL716-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC
The IL716-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL716-3E
- Quantity in Stock:
- 11031
$7.69
AD005-00E: 4 mT Digital Switch, RoHS MSOP
NVE's AD005-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications:
- Part Number:
- AD005-00E
- Quantity in Stock:
- 10834
$4.89
IL3122E: Low-Cost Passive-Input Isolated RS422 Xcvr, 2.5 kV, Wide SOIC
Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3122E
- Quantity in Stock:
- 10822
$4.04
IL3285E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Wide SOIC
Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3285E
- Quantity in Stock:
- 10809
$4.12
IL717-1E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, QSOP
The IL717-1 is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL717-1E
- Quantity in Stock:
- 10496
$7.69
