NVE's ADL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package
2.4 to 4.2 V
Typical Power Consumption 192 nW at 2.4 V
55 Hz Typical Update Frequency
Digital Switch Output
Integrated Duty-Cycling
Applications:
Battery-Powered Devices
Portable Instruments
The Il715-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package.
The "E" suffix indicates this part is lead (Pb) free.
Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package.
This part is lead (Pb) free.
Lead-free
product information
NVE's ADL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package
2.4 to 4.2 V
Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling
250 kHz Operating Frequency
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
AAT101-10E Angle Sensors use a Tunneling Magnetoresistance (TMR)
full-bridges to produce a very high output signal without amplification. The sensors also have a wide
airgap tolerance and high device resistance for low power. Sine
and cosine outputs provide full quadrature.
Key specifications are as follows:
Full-Bridge TMR Angle Sensor
Typ. p-p
Signal
Configuration
Min. Applied
Field
Nonsinusoidality
accuracy
Max. Op.
Temp.
Typ. Device
Resistance
Package
400 mV/V
Full bridge
30 Oe
1.5%
125°C
625 kΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
Galvanically-isolated high-speed RS 485 differential bus transceiver with 2500 Vrms isolation, 2kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package.
The "E" suffix indicates this part is lead (Pb) free.
NVE's ABL004-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 1.0 mm apart on the sensor IC arranged in a full bridge configuration.
Bridge Resistance (Ohms)
Linear Range (Oersteds)
Output
Comments
Package
Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm.
4K - 7K
+/-5 to +/-100
Analog Bridge
Gear Tooth or Encoder
TDFN6
Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
The IL715-1 is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP.
The "E" suffix indicates this part is lead (Pb) free.
The AAL004-10E high-performance magnetometer has high sensitivity and low-hysteresis, making it ideal for low-field applications. With a unique TDFN6 package, it is also our smallest analog sensor.
Features:
Output linear with magnetic fields as low as 1.5 Oe for low-field applications
3.5 mv/V/Oe typical sensitivity for large output signals and low noise
2% maximum hysteresis for precision and repeatability
Omnipolar output for configuration flexibility
–40 to 125°C
Applications:
Current sensing
Low-field sensing for magnetic media
Earths magnetic field detection
Low-Hysteresis Magnetometer
senses fields from permanent magnets, earth, and current sources.
Typ. Saturation Field (Oe)
Linear Range(|Oe|)
min.-max.
Sensitivity (mV/V/Oe)
min.-max.
Resistance
(Ohms)
Package
15
1.5 - 10.5
3.0 - 4.2
2200 ±20%
TDFN6
(RoHS)
Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.
The IL3085E is a cost-effective isolated 4 Mbps RS-485 transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
The IL716 is a 3.3-volt, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package.
The "E" suffix indicates this part is lead (Pb) free.
The IL511-3 is a 3.3V/5V, dual-channel unidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. 8-pin SOIC package.
The "E" suffix indicates this part is lead (Pb) free.
The IL521-3 is a 3.3V/5V, dual-channel bidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. 8-pin SOIC package.
The "E" suffix indicates this part is lead (Pb) free.
Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package.
This part is lead (Pb) free.
Lead-free
product information
ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.
The ADT002 is lower hysteresis than the ADT005 to provide accurate, absolute rotational quadrant information.
The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.
The sensors are typically used with
radially-magnetized disk magnets or split pole magnet.
An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
The IL261-1E is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP.
The "E" suffix indicates this part is lead (Pb) free.
NVE's ADL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package
2.4 to 4.2 V
Typical Power Consumption 192 nW at 2.4 V
110 Hz Typical Update Frequency
Digital Switch Output
Integrated Duty-Cycling
Applications:
Battery-Powered Devices
Portable Instruments
The IL3022E is a cost-effective isolated 4 Mbps RS-422 full-duplex transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
The IL3522 is a galvanically isolated, high-speed differential bus transceiver, designed for bidirectional data communications on balanced transmission lines. The IL3522 offers an exceptional 2.3 V differential output into a 54 ohm load, over the supply range of 4.5 V to 5.5 V. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
This part is lead (Pb) free.
Lead-free
product information
The IL260E is a 3.3/5.0-volt, 5 channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin, wide-body (0.3"-wide) SOIC package.
The "E" suffix indicates this part is lead (Pb) free.