New Products
ALT023-10E: 0-1 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6
The ALT023 is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with extraordinary sensitivity. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: ±1 mT linear range Large signal (200 mV/V/mT typical) Wheatstone bridge magnetometer configuration 0 - 10 V power supply 20 kiloohm device resistance for low power High linearity output (
- Part Number:
- ALT023-10E
- Quantity in Stock:
- 298
$12.00
AD021-00E: 2 mT Digital Switch, RoHS MSOP
NVE's AD021-00E GMR Switch integrates GMR sensor elements with digital onboard
signal processing electronics. The GMR Switch has less field sensing errors than
other magnetic sensors, and magnetic field operate points are stable over voltage
and temperature extremes. This enables high precision, tight-tolerance magnetic
sensing assemblies.
Features:
Precision Magnetic Operate Point -- 20 Oersteds
Excellent Temperature and Voltage Performance
Digital Outputs
Frequency Response 0 to 250 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Pneumatic Cylinder Position Sensing
Speed Sensing
Supply
Voltage
min.-max.
Supply
Current
(mA)
min.-max.
Op. Point
(Oe)
min.-max.
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
4.5-30.0
2.5-4.5
15-25
5
0.4
Current Sink
BBB
Cross axis
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AD021-00E
- Quantity in Stock:
- 239
$4.89
AG904-06: ULLGA General-Purpose PCB
A 1.2 x 0.25 inch x 0.031 inch thick (30 x 6 x 0.75 mm) PCB for demonstrating 1.1 x 1.1 mm ULLGA4 sensors (-14E sensor suffix; order sensors separately).
Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.
- Part Number:
- AG904-06
- Quantity in Stock:
- 237
$5.00
IL7617VE: 4-channel (3 transmit, 1 receive) Isolator w/3.3-3.3V DC-DC Convertor
The IL7617VE is a four-channel (3 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7617VE
- Quantity in Stock:
- 224
$12.40
IL711T-1E: 125C 2-Channel (both same direction) Isolator, 1 kV, MSOP
The IL711T-1 is a high temperature, 3.3/5V, dual-channel, unidirectional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL711T-1E
- Quantity in Stock:
- 207
$6.29
SM228-10E: Smart TMR Magnetometer, 15 mT, I2C, TDFN6
The SM228-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with
sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface.
Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for
optimal current sensing and easy mechanical interfaces. Key features include:
• 0 to 150 Oe / 0 to 15 mT linear range
• Can detect magnets more than 50 mm away
• I2C interface
• Programmable digital threshold output
• 2% of full-scale accuracy for 0 to 125°C
• Fast 10000 sample-per-second update rate
• Factory calibrated
• Programmable offset and gain compensation
• -40°C to +125°C operating range
• Ultraminiature 2.5 x 2.5 mm DFN6 package
- Part Number:
- SM228-10E
- Quantity in Stock:
- 175
$6.88
IL612A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8
The IL612A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL612A-3E
- Quantity in Stock:
- 171
$5.43
IL610-3E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, SOIC8
The IL610-3E is a 3.3/5V, single channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL610-3E
- Quantity in Stock:
- 110
$3.50
IL4685-01: Isolated RS-485 Xcvr w/3 V bus DC-DC Conv Eval Bd
This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.
- Part Number:
- IL4685-01
- Quantity in Stock:
- 100
$84.95
IL7615VE: 4-channel (all same direction) Isolator w/3.3-3.3V DC-DC Convertor
The IL7615VE is a four-channel (all the same direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7615VE
- Quantity in Stock:
- 96
$12.40
IL422: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC (Pb)
Galvanically-isolated full-duplex RS-422 interface in a 0.3" 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity.
- Part Number:
- IL422
- Quantity in Stock:
- 94
$14.57
12032: 1.0" x 0.125" x 0.39" Bar Magnet
The 12032 is a 1.0" long x 0.125" wide x 0.39" thick Y25 ferrite bar magnet. Typical field strength is 1800 Oe at the magnet face. This magnet is also included in the AG910-07 and AG911-07 GMR Switch Evaluation Kits.
- Part Number:
- 12032
- Quantity in Stock:
- 86
$4.25
IL3085TE: 4 Mbps Isolated RS485 Transceiver, 125C, 2.5kV, Wide SOIC
The IL3085TE is an isolated 4 Mbps RS-485 transceiver with an extended temperature range. Compatible with 3.3 V or 5 V input logic. 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL3085TE
- Quantity in Stock:
- 85
$5.56
IL016E: Low-Power, 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC
The IL016E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL016E
- Quantity in Stock:
- 81
$8.23
IL3285-3E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC
Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3285-3E
- Quantity in Stock:
- 77
$4.12
SM124-10E: General-Purpose 1 mT Smart GMR Magnetometer, TDFN6
The SM124-10E Smart Magnetometer combines an omnipolar GMR sensor element with
with easy-to-use digital signal processing.
A digital output provides precise, programmable thresholds.
An I²C interface provides magnetic field data, as well as a
calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.
All commands, data, and coefficients are a single byte, and a
slick, elegant data structure lets you get up and running with
a minimum of firmware.
Key features include:
• Can detect magnets more than 50 mm away
• I²C and digital threshold outputs
• 0-1 mT linear range
• 8-bit / 1% output resolution
• −40°C to +125°C operating range
• 5% FS accuracy for 0 to 85°C
• 10 kSps sample rate for fast response
• 6 mA typical supply current
• In-plane sensitivity more usable than Hall effect sensors
• Programmable offset and gain compensation
• Optional magnet temperature compensation
• 2.2 to 3.6 volt supply
• Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package
- Part Number:
- SM124-10E
- Quantity in Stock:
- 73
$6.88
IL814T-3E: 3-Channel (2 transmit, 1 receive) Top-of-the-Line Isolator, 2.5 kV, Narrow SOIC
The IL814T-3E is NVE's top-of-the-line three-channel bidirectional isolator, with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint
The part uses NVE's unique 16-pin narrow-body (0.15"-wide) SOIC package.
- Part Number:
- IL814T-3E
- Quantity in Stock:
- 72
$6.89
ALT023-10E-EVB01: 0-1 mT TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT023-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT023-10E-EVB01
- Quantity in Stock:
- 60
$19.95
IL7616VE: 4-channel (2 each direction) Isolator w/3.3-3.3V DC-DC Convertor
The IL7616VE is a four-channel (two each direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7616VE
- Quantity in Stock:
- 57
$12.40
ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6
ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.
The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.
The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.
The sensor is factory calibrated, with coefficients stored in
internal memory.
A four-wire SPI interface provides angle data and allows
setting device parameters.
The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.
- Part Number:
- ASR002-10E
- Quantity in Stock:
- 56
$8.98
