New Products
AHL925-14E: 1 mT, 1.5V, Nanopower GMR Switch, ULLGA
NVE's AHL925-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL925-14E
- Quantity in Stock:
- 240000
$7.60
AHL025-14E: 1 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA
NVE's AHL025-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL025-14E
- Quantity in Stock:
- 215000
$7.60
ADL921-14E: 2 mT, 3V Nanopower GMR Switch, ULLGA
NVE's ADL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency operation. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 V to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- ADL921-14E
- Quantity in Stock:
- 139223
$5.15
AHL921-14E: 2 mT, 1.5V, Nanopower GMR Switch, ULLGA
NVE's AHL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL921-14E
- Quantity in Stock:
- 129700
$7.60
ADT005-10E: High Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6
ADT005-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.
The ADT005 is higher hysteresis than the ADT002 for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction.
To minimize power, the ADT005 does not include
the high-field detection circuitry included in the ADT001 version, and is slightly less accurate due to lower-power circuitry.
The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.
The sensors are typically used with
radially-magnetized disk magnets or split pole magnet.
An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- ADT005-10E
- Quantity in Stock:
- 115200
$10.61
AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6
AAT001-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce
a very high output signal without amplification, a wide airgap tolerance, and
very high device resistance for extremely low power. Sine and cosine outputs provide
full quadrature.
Key specifications are as follows:
TMR Angle Sensor
Typ. p-p
Signal
Min. Applied
Field (Oe)
Max. Angular
Error (const. field)
Max. Op.
Temp.
Typ. Device
Resistance
Package
200 mV/V
30 Oe
0.5 degrees
125°C
1.25 MΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- AAT001-10E
- Quantity in Stock:
- 106106
$6.88
AHL024-14E: 2.8 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA
NVE's AHL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL024-14E
- Quantity in Stock:
- 80000
$7.60
AHL924-14E: 2.8 mT, 1.5V, Nanopower GMR Switch, ULLGA
NVE's AHL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL924-14E
- Quantity in Stock:
- 70000
$7.60
ADL021-14E: 2 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA
NVE's ADL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 55 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- ADL021-14E
- Quantity in Stock:
- 60136
$5.15
AHL023-14E: 6 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA
NVE's AHL023-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL023-14E
- Quantity in Stock:
- 47901
$7.60
AHL021-14E: 2 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA
NVE's AHL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHL021-14E
- Quantity in Stock:
- 46031
$7.60
AAT006-10E: Low-Field Angle Sensor, TDFN6
AAT006-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for operation at magnetic fields as low as 15 Oe, allowing an extremely wide airgap tolerance. The device has a large output without amplification, and high device resistance for low power. Sine and cosine outputs provide full quadrature.
Key specifications are as follows:
TMR Angle Sensor
Typ. p-p
Signal
Min. Applied
Field (Oe)
Max. Angular
Error (const. field)
Max. Op.
Temp.
Typ. Device
Resistance
Package
200 mV/V
15 Oe
0.5 degrees
125°C
1.25 MΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
- Part Number:
- AAT006-10E
- Quantity in Stock:
- 40000
$6.88
IL514E: 3-Channel (2 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC
The IL514 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL514E
- Quantity in Stock:
- 33751
$6.99
ADV001-00E: 0.4 mT Bipolar Switch, RoHS MSOP
NVE's ADV001-00E is a GMR Digital Switch using a bipolar output GMR material.
This material allows the sensor to maintain an operate point with the application
of a negative (South) magnetic field, and a release point with the application
of a positive (North) magnetic field. The part is ideal for use with magnetic
encoders that have alternating North/South poles, or in any other application
where one polarity of field is required to turn the part on, and the opposite
polarity is required to turn it off.
Features:
Bipolar Operation (south field ON, north field OFF)
Extremely Sensitive Magnetic Operate Point -- 4 Oersteds
Digital Output
Frequency Response to >100 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Pneumatic Cylinder Position Sensing
Speed Sensing
Supply
Voltage
min.-max.
Supply
Current
(mA)
min.-max.
Op./
Release
(Oe)
ON|OFF
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
4.5-30.0
2.5-4.5
4|-4
2
0.4
Current Sink
FCMe
Cross axis
MSOP8
(Pb)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- ADV001-00E
- Quantity in Stock:
- 32353
$3.75
DC001-10E: 3.3V High-Temp Voltage Regulator
The DC001-10E 3.3 V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 3.3V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information
- Part Number:
- DC001-10E
- Quantity in Stock:
- 20391
$2.50
AA004-02E: 5 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC
NVE's AA004-02E Normalized Output GMR Magnetic Field Sensors have a unique ability
to sense static fields and offer unmatched magnetic sensitivity.
General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources.
Typ. Min. Saturation Field (Oe)
Sensitivity (mV/V/Oe)
Output
Comments
Package
20
0.9 - 1.3
Analog Bridge
Low-Field Measurement
SOIC8 (RoHS)
Note: Quantity Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AA004-02E
- Quantity in Stock:
- 19472
$6.65
DC002-10E: 5V High-Temp Voltage Regulator
The DC001-10E 5V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 5V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information
- Part Number:
- DC002-10E
- Quantity in Stock:
- 19167
$2.50
IL3022E: Low-Cost Isolated RS422 Transceiver, 2.5 kV, Wide SOIC
The IL3022E is a cost-effective isolated 4 Mbps RS-422 full-duplex transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL3022E
- Quantity in Stock:
- 17897
$5.05
AAL004-10E: 1.5 mT Sat. Analog Sensor, 2.2 KOhm, TDFN6
The AAL004-10E high-performance magnetometer has high sensitivity and low-hysteresis, making it ideal for low-field applications. With a unique TDFN6 package, it is also our smallest analog sensor.
Features:
Output linear with magnetic fields as low as 1.5 Oe for low-field applications
3.5 mv/V/Oe typical sensitivity for large output signals and low noise
2% maximum hysteresis for precision and repeatability
Omnipolar output for configuration flexibility
–40 to 125°C
Applications:
Current sensing
Low-field sensing for magnetic media
Earth’s magnetic field detection
Low-Hysteresis Magnetometer—
senses fields from permanent magnets, earth, and current sources.
Typ. Saturation Field (Oe)
Linear Range(|Oe|)
min.-max.
Sensitivity (mV/V/Oe)
min.-max.
Resistance
(Ohms)
Package
15
1.5 - 10.5
3.0 - 4.2
2200 ±20%
TDFN6
(RoHS)
Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.
- Part Number:
- AAL004-10E
- Quantity in Stock:
- 17523
$9.60
IL721T-3E: 125C 2-Channel (reverse configuration) Isolator, 2.5 kV, SOIC8
The IL721T-3 is a high temperature, 3.3/5V dual-channel, bi-directional isolated buffer. Channel configuration is the reverse of the IL712T. 110 Mbps, CMOS compatible with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package.
- Part Number:
- IL721T-3E
- Quantity in Stock:
- 16195
$6.29
