New Products
IL41050TT-01: Low-Cost Isolated CAN Evaluation Board
This board provides a complete isolated Controller Area Network node using NVE's IL41050TTE isolated wide-body basic CAN transceiver.
The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.
- Part Number:
- IL41050TT-01
- Quantity in Stock:
- 50
$49.95
IL41050WB-01: Isolated Wide-Body CAN Evaluation Board
The isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using NVE's popular IL41050TAE isolated wide-body CAN transceiver with true 8mm creepage.
The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.
- Part Number:
- IL41050WB-01
- Quantity in Stock:
- 50
$49.95
IL4622-01: Isolated RS-485/RS-422 Xcvr w/DC-DC Conv Eval Bd
This Evaluation Board is a complete isolated RS-485 / RS-422 node using the IL4622E isolated transceiver with integrated isolated DC-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4622E is a high-speed, fully-isolated, full duplex differential bus transceiver with an integrated
3.3-to-3.3 volt DC-DC convertor to provide a fully-isolated 3.3 volt bus supply using the controller supply. This level of integration dramatically reduces chip count and board area.
- Part Number:
- IL4622-01
- Quantity in Stock:
- 50
$84.95
IL4685-01: Isolated RS-485 Xcvr w/3 V bus DC-DC Conv Eval Bd
This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.
- Part Number:
- IL4685-01
- Quantity in Stock:
- 50
$84.95
IL4822-01: Isolated RS-485 Xcvr w/5V bus DC-DC Conv Eval Bd
This Evaluation Board is a complete isolated RS-485 node using the IL4822E isolated transceiver with integrated DC-to-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4822E is a high-speed, fully-isolated, full-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 5 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.
- Part Number:
- IL4822-01
- Quantity in Stock:
- 50
$84.95
IL611-3-01: IL611-3E 2-Ch (both same dir) Passive-In Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL611-3E two-channel (both the same direction) SOIC8 passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
- Part Number:
- IL611-3-01
- Quantity in Stock:
- 50
$49.95
IL613-01: IL613E 3-Ch (all same dir) Passive-In Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL613E three-channel (all the same direction) passive isolator, input
resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
- Part Number:
- IL613-01
- Quantity in Stock:
- 50
$49.95
IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow
These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input
resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
- Part Number:
- IL614-3-01
- Quantity in Stock:
- 50
$49.95
IL710S-1-01: 150 Mbps 1-Ch MSOP Isolator Eval Board
These 2 x 3.5-inch (50 x 90 mm) boards have an IL710S-1E 150 Mbps single-channel (all the same direction) ultraminiature MSOP8 isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest isolators.
- Part Number:
- IL710S-1-01
- Quantity in Stock:
- 50
$49.95
IL715-01: 4-Ch (all same dir) Wide-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715E four-channel (all the same direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL715-01
- Quantity in Stock:
- 50
$49.95
IL715-1-01: 4-Ch (all same dir) QSOP Isolator Eval Board
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-1E four-channel (all the same direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest high-performance isolators.
- Part Number:
- IL715-1-01
- Quantity in Stock:
- 50
$49.95
IL715-3-01: 4-Ch (all same dir) Narrow-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-3E four-channel (all the same direction) narrow-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL715-3-01
- Quantity in Stock:
- 50
$49.95
IL715V-01: 4-Ch (all same dir) Wide-Body 7 kV Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.
- Part Number:
- IL715V-01
- Quantity in Stock:
- 50
$49.95
IL716-01: 4-Ch (2 ea dir) Wide-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL716E four-channel (two each direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL716-01
- Quantity in Stock:
- 50
$49.95
IL716-1-01: 4-Ch (2 ea dir) QSOP Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL716-1E four channel (two each direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and header pins.
The boards let you evaluate the world's smallest high-performance isolators.
- Part Number:
- IL716-1-01
- Quantity in Stock:
- 50
$49.95
IL716V-01: 4-Ch (2 ea dir) Wide-Body 7 kV Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL716VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.
- Part Number:
- IL716V-01
- Quantity in Stock:
- 50
$49.95
IL717-1-01: 4-Ch (3-xmt, 1-rcv) QSOP Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL717-1E ultraminiature four-channel (three transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest high-performance isolators.
- Part Number:
- IL717-1-01
- Quantity in Stock:
- 50
$49.95
IL717V-01: 4-Ch (3/1 dir) Wide-Body 7 kV Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL717VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.
- Part Number:
- IL717V-01
- Quantity in Stock:
- 50
$49.95
IL7614V-01: Isolated 3-Ch SPI w/Integ DC-DC Conv Eval Board
This Evaluation Board provides a complete isolated three-channel SPI node, plus an isolated 3.3 V to 3.3 V DC-to-DC convertor using an IL7614VE. It is ideal for half-duplex SPI applications.
These 2 x 3.5-inch (50 x 90 mm) boards also include screw terminal and test pads, and uses a 2s2p board with vias for optimal thermal performance. LEDs indicate DC-to-DC convertor input and output power.
The IL7614V is a high-speed, fully-isolated, data couplers with an integrated, one-quarter watt 3.3 V-to-3.3 V DC-to-DC convertor. This level of integration dramatically reduces chip count and board area.
- Part Number:
- IL7614V-01
- Quantity in Stock:
- 50
$84.95
IL7817V-01: Isolated 4-Ch SPI w/Integ DC-DC Conv Eval Board
This Evaluation Board provides a complete isolated four-channel SPI node, plus an isolated 3.3 V to 5 V DC-to-DC convertor using an IL7817VE.
The board provides screw terminals for connections, plus test points for checking voltages and I/O. There are also LEDs to indicate DC-to-DC convertor input and output power. It uses a 2s2p board with thermal vias for optimal thermal performance.
The IL7817V is a high-speed, fully-isolated, data couplers with an integrated, one-quarter watt 3.3 V to 5 V DC-to-DC boost convertor. This level of integration dramatically reduces chip count and board area.
- Part Number:
- IL7817V-01
- Quantity in Stock:
- 50
$84.95
