New Products
AG957-06E: Bare breakout board for ASR0xx Smart Angle Sensors
The AG957-06E provides easy connections to an ASR-Series Smart Angle Sensor (sensors sold separately). In addition a spot for the sensor, the board has a spot for a bypass capacitor and a header to connected to the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG957-06E
- Quantity in Stock:
- 11
$2.25
IL261VE: 6 kV, 5-Channel (4 transmit, 1 receive) Isolator, Wide SOIC
The IL261VE is a 6 kVrms isolation, 3.3/5V, 5 channel (4 transmit; 1 receive) isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin RoHS wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL261VE
- Quantity in Stock:
- 11
$9.40
IL41050TFD-1-01: QSOP Isolated CAN FD Evaluation Board
The isolated CAN FD Evaluation Board provides a complete isolated Controller Area Network node using the world's smallest isolated CAN FD transceiver, the IL41050TFD-1E.
The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, pull-up resistors, and a jumper to select normal or silent mode.
- Part Number:
- IL41050TFD-1-01
- Quantity in Stock:
- 11
$49.95
AG967-07E: ASR022 ABZ Smart TMR Encoder Sensor breakout board
The AG967-07E provides easy connections to an ASR022-10E ABZ TMR Encoder Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG967-07E
- Quantity in Stock:
- 14
$19.95
IL7814VE: 3-channel (both same direction) Isolator w/3.3-5V DC-DC Convertor
The IL7814VE is a three-channel (2 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7814VE
- Quantity in Stock:
- 16
$11.78
SHIELD01-01: 40V/50A H-Bridge Arduino Shield Eval Board
This Arduino Shield board implements an H-bridge power converter using four power MOSFETs, four IL610CMTI-1E
ultrahigh CMTI isolated MOSFET drivers, and two ILDC13-15E ultraminiature isolated DC-to-DC convertors.
The board is rated for 40 volts and 50 amps, to control
up to two-kilowatt loads.
Example programs are available via our GitHub Repository.
Key features of the board are:
• A Simple three-wire Arduino interface (PWM, Dir, and Enable)
• Heat-sinking and thermal vias
• Standard Arduino Shield form factor outline
• Easy connections with large screw terminals
Specifications:
• Max. load: 2 kW (40 V / 50 A)
• Load supply line: 8 to 40 V
• Arduino input supply: 5V or 7 V to 20 V, 500 mA max.
• Logic-to-load isolation: 2.5 kV per UL 1577
• Operating Temperature Range: -40 °C to 85 °C
• Dimensions: 2.1 in. by 2.7 in. (53.4 mm by 68.6 mm)
Applications:
• Motor speed and direction control
• Robotics
• DC-to-AC invertors
- Part Number:
- SHIELD01-01
- Quantity in Stock:
- 17
$195.95
IL711V-1E: 2.5 kV, 2-Channel (both same direction) Isolator, MSOP
The IL711V-1 is a dual-channel bidirectional, 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.
The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL711V-1E
- Quantity in Stock:
- 18
$6.92
IL7812VE: Two-channel (one each direction) Isolator w/3.3-5V DC-DC Convertor
The IL7812VE is a two-channel (one each direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7812VE
- Quantity in Stock:
- 18
$11.16
AG930-07E: AAT001 1.25 MOhm Angle Sensor Evaluation Kit
The kit includes a circuit board with an AAT001-10E 1.25 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture.
- Part Number:
- AG930-07E
- Quantity in Stock:
- 19
$70.00
AG974-07E: ACT001-10E Isolated Current Sensor Evaluation Board
This 2” x 2” square evaluation board allows you to test the remarkable
ACT001-10E current sensor and a common application circuit.
The ACT001-10E is a fully-isolated, inline current sensor with
an on-chip current strap. A Wheatstone bridge manufactured
with NVE’s state-of-the-art tunneling magnetoresistance (TMR)
sensor elements detects the magnetic field from the input current
across NVE’s unique polymer isolation barrier.
- Part Number:
- AG974-07E
- Quantity in Stock:
- 19
$50.00
ALT025-10E-EVB01: 0-10 mT DFN6 TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT025-10E-EVB01
- Quantity in Stock:
- 19
$19.95
IL012-3E: Low-Power, 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8
The IL012-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.
- Part Number:
- IL012-3E
- Quantity in Stock:
- 19
$6.29
AG965-07E: AET500-02E TMR Linear Sensor Demo Kit
The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor.
The kit includes:
• A 3 x 5-inch (76 x 127 mm) PCB
• An AET500-02E 5 mm pole-pitch sensor
• A four digit position display
• Part #12592 5mm pole pitch magnetic tape
• 3-D printed fixturing
• LEDs for pole detected
• Powered by three AAA batteries (included)
- Part Number:
- AG965-07E
- Quantity in Stock:
- 20
$195.00
IL511-1E: 2-Channel Isolator (both same direction), 1 kV, MSOP
The IL511-1 is a 3.3V/5V, dual-channel unidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 1 kVrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. Unique 8-pin MSOP. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL511-1E
- Quantity in Stock:
- 20
$5.67
AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit
The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate
the remarkable SM324-10E Smart TMR Magnetometer. The kit includes:
• An evaluation board with:
- an SM324-10E sensor.
- a microcontroller connected to the sensor via I²C.
- a current-carrying trace under the sensor for evaluating as a current sensor.
• A powerful, intuitive graphical user interface.
• Simple software installation.
• Flexibility to power from USB or an external power supply.
• Isolated USB interface for safety and noise minimization.
• USB cable to connect the Evaluation Board to a computer.
• A small ceramic magnet for evaluating as a proximity sensor.
- Part Number:
- AG951-07E
- Quantity in Stock:
- 21
$245.00
AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit
The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers.
- Part Number:
- AG931-07E
- Quantity in Stock:
- 22
$75.00
AG961-07E: SM125 Smart GMR Magnetometer breakout board w/connector
The AG961-07E provides easy connections to an SM125-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG961-07E
- Quantity in Stock:
- 22
$24.95
IL7816VE: 4-channel (2 each direction) Isolator w/3.3-5V DC-DC Convertor
The IL7816VE is a four-channel (two each direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7816VE
- Quantity in Stock:
- 22
$12.40
IL710-1E: 1-Channel Isolator, 1 kV, MSOP
The IL710-1 is a 3.3V/5V, single channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.
- Part Number:
- IL710-1E
- Quantity in Stock:
- 23
$3.58
AAH002-02E PCBA: Ultrahigh Sensitivity Analog Sensor Assembly
A preassembled circuit board with a high-sensitivity AAH002-02E sensor and a differential amplifier circuit with a gain of 25. The board can be powered by a 2.7 to 12 V supply and provides a single-ended output with a typical sensitivity of 3.75 V/V/mT (375 mV/V/Oe).The circuit board is 12.5 x 7.8 mm, with Vcc, GND, and OUT plated-through holes for wires or a header.
- Part Number:
- AAH002-02E PCBA
- Quantity in Stock:
- 27
$150.00
