New Products

Displaying 101 to 120 (of 364 products)
AG911-07E: GMR Switch Evaluation Kit

AG911-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. A magnet and circuit boards for mounting the parts are included.

Part Number:
AG911-07E
Quantity in Stock:
11

$65.00

IL41050TT-01: Low-Cost Isolated CAN Evaluation Board

This board provides a complete isolated Controller Area Network node using NVE's IL41050TTE isolated wide-body basic CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050TT-01
Quantity in Stock:
11

$48.95

AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers.

Part Number:
AG931-07E
Quantity in Stock:
12

$75.00

IL41050-01: Narrow-Body Isolated CAN Evaluation Board

The CAN Evaluation Board provides a complete isolated Controller Area Network node using the popular IL41050TA-3E isolated narrow-body isolated CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050-01
Quantity in Stock:
12

$49.95

IL41050TFD-1-01: QSOP Isolated CAN FD Evaluation Board

The isolated CAN FD Evaluation Board provides a complete isolated Controller Area Network node using the world's smallest isolated CAN FD transceiver, the IL41050TFD-1E.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, pull-up resistors, and a jumper to select normal or silent mode.

Part Number:
IL41050TFD-1-01
Quantity in Stock:
12

$49.95

IL712-3: 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8 (Pb)

The IL712-3 is a 3.3/5V, dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package.

Part Number:
IL712-3
Quantity in Stock:
13

$5.82

ABL014-00E: 1 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL014-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 1.0 mm apart on the sensor IC, and the two sensors are phase shifted by 0.5 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm, and sensor-to-sensor phase shift is 0.500 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL014-00E
Quantity in Stock:
15

$6.25

IL610-3E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL610-3E is a 3.3/5V, single channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-3E
Quantity in Stock:
15

$3.49

AG960-07E: SM324 Ultraprecise Smart Magnetometer breakout board

The AG960-07E provides easy connections to an SM324-10E Precision TMR Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG960-07E
Quantity in Stock:
17

$19.95

Technical Video DVD

Two dozen of NVE's most popular technical videos cover technology, NVE products, and practical application tips. Virtual actors Daniella, Jayne, Sandy, Dee, and N. V. e-Geek provide valuable information in a fun format.

So crank up the big screen, grab some popcorn, and invite some friends (98 minutes; NTSC format).

Part Number:
DVD
Quantity in Stock:
17

$14.95

AG920-07E: GT Sensor Evaluation Kit

The kit includes one of each of NVE's analog and digital GT Sensors, two DD001-12E signal processing ICs, and several circuit boards for fixturing and testing the sensors.

Part Number:
AG920-07E
Quantity in Stock:
18

$65.00

AG952-07E: SM124-10E Smart GMR Magnetometer Evaluation Kit

The AG952-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM124-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM124-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG952-07E
Quantity in Stock:
18

$95.00

IL711V-1E: 2.5 kV, 2-Channel (both same direction) Isolator, MSOP

The IL711V-1 is a dual-channel bidirectional, 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711V-1E
Quantity in Stock:
18

$6.98

IL485WE: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC

The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL485WE
Quantity in Stock:
22

$12.57

IL613-3E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Narrow SOIC

The IL613-3E is a 3.3/5V, 3-channel (all in same direction), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop GMR Sensor technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.15" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL613-3E
Quantity in Stock:
22

$6.99

ILDC11-15E: Ultraminiature Isolated 1/4W 3.3-to-3.3V DC-DC Conv

The ILDC11-15E is a one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The part can be used to generate an isolated 3.3-volt bus supply from a controller supply.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide full 2.5 kV isolation and virtually unlimited barrier life.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC11-15E
Quantity in Stock:
22

$5.43

AKT001-14E: 1.5 T Sat. Ultrahigh-Field TMR Magnetometer, 1 MOhm, DFN4

The AKT001-14E is an ultrahigh-field magnetometer sensor that provides precise sensing of magnetic fields up to 1.5 T (15 kOe). NVE’s unique Tunneling Magnetoresistive (TMR) technology provides unmatched field range, low power, and small size. Features: Tunneling Magnetoresistance (TMR) technology 1.5 T saturation 0.05 to 1 T linear range High resistance for battery powered applications Sensitive to fields of any direction in the IC plane Ratiometric Wheatstone bridge outputs Wide supply voltage range (

Part Number:
AKT001-14E
Quantity in Stock:
24

$11.52

ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6

ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

A four-wire SPI interface provides angle data and allows setting device parameters.

The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR002-10E
Quantity in Stock:
24

$6.30

DD001-12E: Signal Processing IC

NVE's DD Series signal processing ICs take analog, sinusoidal signals from NVE ABL-Series or other sensors and provide a two wire, current-modulated digital output. The DD001-12E provides a 50% duty cycle digital output with input signals as small as 2 mV peak-to-peak, and rejects large input offsets. Features: Converts Analog Sensor to Digital Operation 2-Wire Output 50% Duty Cycle Excellent Temperature and Voltage Performance Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities for 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free.

Part Number:
DD001-12E
Quantity in Stock:
28

$6.05

IL422E: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC

Galvanically-isolated full-duplex RS 422 interface in a 0.3"-wide 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity. This part is lead (Pb) free. Lead-free product information

Part Number:
IL422E
Quantity in Stock:
30

$12.57

Displaying 101 to 120 (of 364 products)