New Products
AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board
The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040T
$19.95
AG905-07E: ALT025 High Current PCB Demonstration
This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output.
- Part Number:
- AG905-07E
$75.00
AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator
A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".
- Part Number:
- AG921-07E
$90.00
AG955-07E: Self-Contained SM12x Programmer
This self-contained module allows zeroing and programming the digital output threshold and hysteresis or SM124-10E or SM125-10E Smart Magnetometer without need of a computer or a customer microcontroller.
The 2.5" x 2.5" (64 mm x 64 mm) board has an I²C master microcontroller connected to the SM124.
A pushbutton for zeros the sensor, and miniature rotary thumbwheel switches provide three digits of resolution for the threshold and two for hysteresis. A custom TDFN-6 socket accommodates the 2.5 mm x 2.5 mm SM12x-10E. The module is powered by a small wall-mounted power supply (included).
Jumpers allow the sensor to be disconnected from the rest of the board so the board can be used as an interface to the customer’s electronics.
This module includes:
• A 2.5 x 2.5 mm TDFN6 socket for a SM12x-10E Smart Magnetometer
• A preprogrammed, onboard microcontroller
• Two sets of thumbwheel switches for digital threshold and hysteresis
• Two LEDs indicating the sensor’s output and successful programming
• A 5-volt wall-mount power supply
Sensors are sold separately.
- Part Number:
- AG955-07E
$195.00
AG957-07E: ASR002 Smart TMR Angle Sensor breakout board
The AG957-07E provides easy connections to an ASR002-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG957-07E
$19.95
AG958-07E: SM124 Smart GMR Magnetometer breakout board w/connector
The AG958-07E provides easy connections to an SM124-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG958-07E
$24.95
AG960-07E: SM324 Ultraprecise Smart Magnetometer breakout board
The AG960-07E provides easy connections to an SM324-10E Precision TMR Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG960-07E
$19.95
AG966-07E: ASR012 I2C/PWM Smart TMR Angle Sensor breakout board
The AG966-07E provides easy connections to an ASR012-10E I2C/PWM TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG966-07E
$19.95
AG968-07E: SM228 15 mT I2C Smart TMR Magnetometer Breakout Board
The AG968-07E provides easy connections to an SM228-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG968-07E
$19.95
AG970-07E: AET-Series TMR Linear Sensor Eval Kit
The AG970-07E Evaluation Kit helps test a variety AET-Series sensors with linear magnetic scales. The kit includes:
• All five AET-Series parts (unsoldered in tubes)
• A 3 x 4-inch (76 x 101 mm) PCB with test points and screw terminals
• Detachable fixturing for linear magnetic tape (tape sold separately)
- Part Number:
- AG970-07E
$65.00
AG974-07E: ACT001-10E Isolated Current Sensor Evaluation Board
This 2” x 2” square evaluation board allows you to test the remarkable
ACT001-10E current sensor and a common application circuit.
The ACT001-10E is a fully-isolated, inline current sensor with
an on-chip current strap. A Wheatstone bridge manufactured
with NVE’s state-of-the-art tunneling magnetoresistance (TMR)
sensor elements detects the magnetic field from the input current
across NVE’s unique polymer isolation barrier.
- Part Number:
- AG974-07E
$50.00
AG975-07E: SM223 1.5 mT I2C Smart TMR Magnetometer Breakout Board
The AG975-07E provides easy connections to an SM223-10E high-sensitivity Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG975-07E
$19.95
AG976-07E: ASR003-10E Smart SPI Angle Sensor Evaluation Kit
The AG976 demonstration board includes an ASR003-10E sensor, a diametrical magnet, magnet fixturing, and an interface board with a microcontroller. Four variable-brightness LEDs show the magnetic field strength in each direction.
Easy-to-install Windows software provides a graphical user interface showing the sensor output and allowing sensor parameters to be programmed.
- Part Number:
- AG976-07E
$195.00
AHT924-14E: 2.2 mT, 1.5V, Nanopower TMR Switch, ULLGA
AHT924-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHT924-14E
$8.36
AHT925-14E: 1.5 mT, 1.5V, Nanopower TMR Switch, ULLGA
AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- AHT925-14E
$8.36
AKL001-12E: 1 mm, Digital Gear-Tooth Sensor, TDFN
NVE's AKL001-12E GMR Gear Tooth Sensor is a digital output speed sensor for coarse-pitch gear tooth sensing and magnetic encoders. It is based on NVE's ABL004 differential sensor, and is easily biased with a permanent magnet for use with a gear-tooth style target. It provides a large airgap and 50% duty cycle current-modulated output over the -40C to +150C temperature range. This is a Lead (Pb) free, RoHS compliant part. Input Voltage Output Current (Typical) Airgap (Standard Target) Comments Package Digital Output Gear Tooth Sensor based on a differential sensor element; provides a current modulated output and 50% duty cycle over a wide range of temperatures and airgaps. 4.5 - 48 4mA Off / 8mA On 1.0mm to 3.5mm Gear Tooth or Encoder DFN8 Note: Parts must be purchased in multiples of 100 for quantities for 100 or more. This part is not recommended for new designs.
- Part Number:
- AKL001-12E
$15.50
AKL002-12E: 0.5 mm, Digital Gear-Tooth Sensor, TDFN
NVE's AKL002-12E GMR Gear Tooth Sensor is a digital output speed sensor for coarse-pitch gear tooth sensing and magnetic encoders. It is based on NVE's ABL005 differential sensor, and is easily biased with a permanent magnet for use with a gear-tooth style target. It provides a large airgap and 50% duty cycle current-modulated output over the -40C to +150C temperature range. This is a Lead (Pb) free, RoHS compliant part. Input Voltage Output Current (Typical) Airgap (Standard Target) Comments Package Digital Output Gear Tooth Sensor based on a differential sensor element; provides a current modulated output and 50% duty cycle over a wide range of temperatures and airgaps. 4.5 - 48 4mA Off / 8mA On 1.0mm to 2.5mm Gear Tooth or Encoder DFN8 Note: Parts must be purchased in multiples of 100 for quantities for 100 or more. This part is not recommended for new designs.
- Part Number:
- AKL002-12E
$15.50
AKT001-14E: 1.5 T Sat. Ultrahigh-Field TMR Magnetometer, 1 MOhm, DFN4
The AKT001-14E is an ultrahigh-field magnetometer sensor that provides precise sensing of magnetic fields up to 1.5 T (15 kOe). NVE’s unique Tunneling Magnetoresistive (TMR) technology provides unmatched field range, low power, and small size. Features: Tunneling Magnetoresistance (TMR) technology 1.5 T saturation 0.05 to 1 T linear range High resistance for battery powered applications Sensitive to fields of any direction in the IC plane Ratiometric Wheatstone bridge outputs Wide supply voltage range (
- Part Number:
- AKT001-14E
$11.52
ALT025-14E: 0-10 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, DFN4
The ALT025-14E is an ultraminiature Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor
with an extraordinary amount of signal. The differential bridge
output is bipolar, meaning it is positive for a positive field and negative for
an opposite field polarity.
Features:
Tunneling Magnetoresistive Technology (TMR)
Large signals (20 mV/V/mT typical)
Wheatstone bridge magnetometer configuration
20 kiloohm device resistance for low power
±10 mT linear range
1.1 x 1.1 mm DFN4 package
–40 to 125°C
Applications:
Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics
- Part Number:
- ALT025-14E
$12.00
ASR012-10E: Smart I²C TMR Angle Sensor, TDFN6
ASR012 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.
The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.
The ASR012 provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.
The sensor is factory calibrated, with coefficients stored in
internal memory.
An I²C interface provides angle data and allows
setting device parameters. A PWM output is also provided
The ASR012 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.
- Part Number:
- ASR012-10E
$8.98
