New Products

Displaying 1 to 20 (of 443 products)
AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit

The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable SM324-10E Smart TMR Magnetometer. The kit includes:
    • An evaluation board with:
          - an SM324-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A powerful, intuitive graphical user interface.
    • Simple software installation.
    • Flexibility to power from USB or an external power supply.
    • Isolated USB interface for safety and noise minimization.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG951-07E
Quantity in Stock:
20

$245.00

SMPS1-01: IL711/IL610 MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel, failsafe, MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has 1.2 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS1-01
Quantity in Stock:
6

$199.95

SMPS2-01: 2.5 kV MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has full 2.5 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS2-01
Quantity in Stock:
8

$199.95

SHIELD01-01: 40V/50A H-Bridge Arduino Shield Eval Board

This Arduino Shield board implements an H-bridge power converter using four power MOSFETs, four IL610CMTI-1E ultrahigh CMTI isolated MOSFET drivers, and two ILDC13-15E ultraminiature isolated DC-to-DC convertors.

The board is rated for 40 volts and 50 amps, to control up to two-kilowatt loads.

Example programs are available via our GitHub Repository.

Key features of the board are:
  • A Simple three-wire Arduino interface (PWM, Dir, and Enable)
  • Heat-sinking and thermal vias
  • Standard Arduino Shield form factor outline
  • Easy connections with large screw terminals

Specifications:
  • Max. load: 2 kW (40 V / 50 A)
  • Load supply line: 8 to 40 V
  • Arduino input supply: 5V or 7 V to 20 V, 500 mA max.
  • Logic-to-load isolation: 2.5 kV per UL 1577
  • Operating Temperature Range: -40 °C to 85 °C
  • Dimensions: 2.1 in. by 2.7 in. (53.4 mm by 68.6 mm)

Applications:
  • Motor speed and direction control
  • Robotics
  • DC-to-AC invertors

Part Number:
SHIELD01-01
Quantity in Stock:
17

$195.95

SHIELD02: Angle/Rotation Sensor Eval Arduino Shield

Arduino Shield02 demonstrates NVE ALT521 or AAT-, ADT- and ASR-Series angle/rotation sensors. The Shield connects via an edge connector to a sensor breakout board. Sixty LEDs indicate the angle, and colors indicate direction of rotation.

A diametrically-magnetized neodymium magnet is included, and a magnet fixture allows the magnet to be positioned on-axis or in one of three off-axis positions.

Arduino not included; breakout boards sold separately. The Shield is compatible with the following breakout boards:
  ALT521-10E-EVB01: Ultrahigh sensitivity analog angle sensor
  AAT003-10E-EVB01: Low output impedance analog angle sensor
  AAT006-10E-EVB01: High-sensitivity analog angle sensor
  ADT002-10E-EVB01: Digital output quadrature rotation sensor
  ASR002-10E-EVB01: SPI interface factory-calibrated angle sensor
  ASR012-10E-EVB01: I²C interface factory-calibrated angle sensor
  ASR022-10E-EVB01: ABZ Encoder Sensor

Arduino Software and detailed documentation can be downloaded from NVE's GitHub repository.

Part Number:
SHIELD02

$195.95

AG955-07E: Self-Contained SM12x Programmer

This self-contained module allows zeroing and programming the digital output threshold and hysteresis or SM124-10E or SM125-10E Smart Magnetometer without need of a computer or a customer microcontroller.

The 2.5" x 2.5" (64 mm x 64 mm) board has an I²C master microcontroller connected to the SM124.

A pushbutton for zeros the sensor, and miniature rotary thumbwheel switches provide three digits of resolution for the threshold and two for hysteresis. A custom TDFN-6 socket accommodates the 2.5 mm x 2.5 mm SM12x-10E. The module is powered by a small wall-mounted power supply (included).

Jumpers allow the sensor to be disconnected from the rest of the board so the board can be used as an interface to the customer’s electronics.

This module includes:

    • A 2.5 x 2.5 mm TDFN6 socket for a SM12x-10E Smart Magnetometer

    • A preprogrammed, onboard microcontroller

    • Two sets of thumbwheel switches for digital threshold and hysteresis

    • Two LEDs indicating the sensor’s output and successful programming

    • A 5-volt wall-mount power supply

Sensors are sold separately.

Part Number:
AG955-07E

$195.00

AG956-07E: ASR002-10E Smart SPI Angle Sensor Evaluation Kit

The AG956-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR002-10E Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR002-10E sensor
          - a diametrical magnet
          - magnet fixturing and a

    • An interface board with:
          - a microcontroller connected to the sensor via SPI
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG956-07E
Quantity in Stock:
10

$195.00

AG963-07E: ASR012-10E I²C Smart Angle Sensor Evaluation Kit

The AG963-07E Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR012-10E I2C Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR012-10E sensor
          - a diametrical magnet
          - magnet fixturing

    • An interface board with:
          - a microcontroller connected to the sensor via I²C
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG963-07E
Quantity in Stock:
5

$195.00

AG965-07E: AET500-02E TMR Linear Sensor Demo Kit

The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor. The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB   • An AET500-02E 5 mm pole-pitch sensor
  • A four digit position display
  • Part #12592 5mm pole pitch magnetic tape
  • 3-D printed fixturing
  • LEDs for pole detected
  • Powered by three AAA batteries (included)

Part Number:
AG965-07E
Quantity in Stock:
20

$195.00

AG972-07E: ABT375 TMR Gear-Tooth Sensor Demo Kit

The AG972-07E Demonstration Board showcases rotational encoding to a few thousandths of a degree with an ABT375-00E sensor and a 30-tooth gear.

The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB
  • An ABT375-00E gear tooth sensor
  • An eight-digit rotational display
  • a 30-tooth. 0.5 module gear
  • Part #12216 ceramic bias magnet
  • Test points for analog outputs
  • Powered by two AAA batteries (included)

Part Number:
AG972-07E
Quantity in Stock:
1

$195.00

AG935-07E: 60-LED "Blinky" AAT003 Angle Sensor Demo Board

This kit includes a 5-inch by 5-inch circuit board with an AAT003 Angle Sensor, 60 multicolor smart LEDs (6° spacing) to indicate rotation angle, and a preprogrammed, onboard ATtiny microcontroller. The microcontroller also provides a PWM angle output. The board is factory calibrated and can optionally be field calibration. A split-pole magnet, a magnet locating fixture, and a 5-volt wall mount power supply module are also included. The board comes preprogrammed, but the Arduino compatible software is available on Github/NveCorporation so you can use the routines in your own application.

Part Number:
AG935-07E
Quantity in Stock:
2

$150.00

AG953H-07E: SM225-10E Bussbar Current Sensor Demonstration

The AG953H-07 demonstrates high current measurement with the SM225-10E Smart TMR Magnetometer. A 1/4" x 1/2" busbar is mounted to the PCB, and the sensor can detect up to +/-650 amps. Based on the AG953-07E Evaluation Kit, a powerful, intuitive graphical user interface allows the user to control sensor offset, calibration, filtering, and memory.

Part Number:
AG953H-07E
Quantity in Stock:
1

$129.00

AG954-07E: TDFN6 Socket Board

The AG954-07E provides a socket for easy programming and prototyping of TDFN6 devices without soldering and unsoldering.

The custom socket is compatible with NVE's 2.5 mm x 2.5 mm TDFN6 package parts (-10E suffixes).

The board is 1.5" x 2" (38 mm x 50 mm), and uses brass hardware to minimize magnetic interference with the socketed sensor.
A 0.1"-spaced header provides for connections to the sensors, and a row of 0.1"-spaced through-holes allows for auxiliary parts such as a decoupling capacitor or an LED.

Part Number:
AG954-07E

$129.00

AG952-07E: SM124-10E Smart GMR Magnetometer Evaluation Kit

The AG952-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM124-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM124-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG952-07E
Quantity in Stock:
5

$95.00

AG953-07E: SM225-10E Smart TMR Magnetometer Evaluation Kit

The AG953-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM225-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM225-10E sensor.
          - a microcontroller connected to the sensor via SPI.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG953-07E
Quantity in Stock:
3

$95.00

AG962-07E: SM125-10E Smart GMR Magnetometer Evaluation Kit

The AG962-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM125-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM125-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG962-07E
Quantity in Stock:
3

$95.00

AG969-07E: SM228-10E Smart I²C TMR Magnetometer Evaluation Kit

The AG969-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM228-10E I2C Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM228-10E sensor.
          - a microcontroller connected to the sensor via I2C.
          - a bus-bar for evaluating as a current sensor.
    • An LED indicating the state of the threshold output.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG969-07E
Quantity in Stock:
4

$95.00

AG973-07E: SM223-10E Smart I²C TMR Magnetometer Evaluation Kit

The AG973-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM223-10E I2C Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM228-10E sensor.
          - a microcontroller connected to the sensor via I2C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • An LED indicating the state of the threshold output.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG973-07E
Quantity in Stock:
6

$95.00

AG910-07E: GMR Switch Evaluation Kit w/ZIF socket

AG910-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. Magnets, circuit boards for mounting the parts, and a zero insertion force (ZIF) socket are also included.

Part Number:
AG910-07E
Quantity in Stock:
10

$90.00

AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator

A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".

Part Number:
AG921-07E

$90.00

Displaying 1 to 20 (of 443 products)