New Products
IL485WE: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC
The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL485WE
$12.58
IL422: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC (Pb)
Galvanically-isolated full-duplex RS-422 interface in a 0.3" 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity.
- Part Number:
- IL422
- Quantity in Stock:
- 94
$14.57
IL485: Isolated RS485/PROFIBUS Transceiver, 2.5 kV, Wide SOIC (Pb)
Galvanically-isolated high-speed RS-485 differential bus transceiver with 2500 Vrms isolation, 2 kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package.
- Part Number:
- IL485
- Quantity in Stock:
- 690
$14.57
IL485W: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC (Pb)
The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations.
- Part Number:
- IL485W
- Quantity in Stock:
- 2519
$14.57
Technical Video DVD
Two dozen of NVE's most popular technical videos cover technology, NVE products, and practical application tips. Virtual actors Daniella, Jayne, Sandy, Dee, and N. V. e-Geek provide valuable information in a fun format.
So crank up the big screen, grab some popcorn, and invite some friends (98 minutes; NTSC format).
- Part Number:
- DVD
$14.95
AKL003-12E: 0.3 mm, Digital Gear-Tooth Sensor, TDFN
NVE's AKL003-12E GMR GMR Gear Tooth Sensor is a digital output speed sensor for coarse-pitch gear tooth sensing and magnetic encoders. It is based on NVE's ABL006 differential sensor, and is easily biased with a permanent magnet for use with a gear-tooth style target. It provides a large airgap and 50% duty cycle current-modulated output over the -40C to +150C temperature range. This is a Lead (Pb) free, RoHS compliant part. Input Voltage Output Current (Typical) Airgap (Standard Target) Comments Package Digital Output Gear Tooth Sensor based on a differential sensor element; provides a current modulated output and 50% duty cycle over a wide range of temperatures and airgaps. 4.5 - 48 4mA Off / 8mA On 1.0mm to 2.5mm Gear Tooth or Encoder DFN8 Note: Parts must be purchased in multiples of 100 for quantities for 100 or more. This part is not recommended for new designs.
- Part Number:
- AKL003-12E
- Quantity in Stock:
- 6958
$15.50
AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board
This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040C
- Quantity in Stock:
- 27
$16.95
AAK001-14E: 400 mT Sat. High-Field Magnetometer, 3.5 KOhm, ULLGA
The AAK001-14E is a high-field magnetometer sensor that provides precise sensing
of magnetic fields up to 4 kOe (400 mT). With a unique 1.1 mm x 1.1 mm package
package, it is also our smallest analog sensor.
Features:
Precise sensing of magnetic fields up to 4 kOe (400 mT)
Sensitive to fields of any direction in the IC plane
Ratiometric Wheatstone bridge outputs
Any operating supply voltage up to 12V
Ultraminiature 1.1 x 1.1 mm package
Applications:
Brushless DC motors
Motor commutator sensors
Noncontact high-current measurement
Harsh industrial applications
Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.
- Part Number:
- AAK001-14E
- Quantity in Stock:
- 36
$17.05
ADK991-14E: 350 mT, 3V Nanopower TMR Switch, ULLGA
The ADK991-14E Nanopower Switch integrates TMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 350 mT Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: MRI Detection Battery-Powered Devices Portable Instruments Wearables
- Part Number:
- ADK991-14E
- Quantity in Stock:
- 5
$17.05
AHK991-14E: 350 mT, 1.5V, TMR Switch, ULLGA
The unique AHK991-14E is a high-field, low voltage, low power, TMR magnetic switch, designed for MRI detection in implantable medical devices.
The sensors have a 350 mT (3500 Oe) typical operate point, which is high enough to detect MRI fields or strong, rare-earth magnets in close proximity. Such high fields disrupt most other magnetic sensors.
The sensors can withstand unlimited fields without
being damaged or turning off.
Unlike Hall effect or other sensors, the switch is sensitive to magnetic fields in any direction.
Key Specifications:
350 mT operate point
0.9 to 1.8 V
2 µA typical supply current
3000 Hz switching speed
-40 to 85°C
- Part Number:
- AHK991-14E
- Quantity in Stock:
- 47
$17.05
AKT001-14E: 1.5 T Sat. Ultrahigh-Field TMR Magnetometer, 1 MOhm, DFN4
The AKT001-14E is an ultrahigh-field magnetometer sensor that provides precise sensing of magnetic fields up to 1.5 T (15 kOe). NVE’s unique Tunneling Magnetoresistive (TMR) technology provides unmatched field range, low power, and small size. Features: Tunneling Magnetoresistance (TMR) technology 1.5 T saturation 0.05 to 1 T linear range High resistance for battery powered applications Sensitive to fields of any direction in the IC plane Ratiometric Wheatstone bridge outputs Wide supply voltage range (
- Part Number:
- AKT001-14E
- Quantity in Stock:
- 53
$17.05
AAT001-10E-EVB01: 1.25 MOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT001-10E 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT001-10E-EVB01
- Quantity in Stock:
- 29
$19.95
AAT003-10E-EVB01: 40 kOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT003-10E40 kOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT003-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT006-10E-EVB01: 1.5 mT TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT006-10E1.5 mT, 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT006-10E-EVB01
- Quantity in Stock:
- 29
$19.95
AAT009-10E-EVB01: 6 MOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT009-10E 6 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and draws less than a microwatt. It provides sine and cosine analog outputs.
- Part Number:
- AAT009-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT101-10E-EVB01: Full-Bridge TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT101-10E Full-Bridge Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides full-bridge sine and cosine analog outputs.
- Part Number:
- AAT101-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AG040B: ADL021 Battery-Powered Nanopower Sensor Demonstration Board
This kit includes a demo board with the ultraminiature, ultralow-power ADL021 magnetic switch. An LED shows the sensor output. The board is powered by a three-volt lithium coin cell (included), and the sensor quiescent power consumption is so low that the battery will last indefinitely. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Sensor quiescent current is only 100 nA typical; the sensor operate point is 20 Oe; and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040B
- Quantity in Stock:
- 31
$19.95
AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board
The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040T
$19.95
AG959-07E: SM225 High-Speed Smart TMR Magnetometer breakout board
The AG959-07E provides easy connections to an SM225-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG959-07E
- Quantity in Stock:
- 4
$19.95
AG960-07E: SM324 Ultraprecise Smart Magnetometer breakout board
The AG960-07E provides easy connections to an SM324-10E Precision TMR Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG960-07E
- Quantity in Stock:
- 6
$19.95
