New Products
SMPS2-01: 2.5 kV MSOP Isolated 2.5W SMPS Demo Board
This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode
power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.
The output is 3.3V at 750 mA.
The board has three channels of isolation to ensure the output is electrically isolated from the
input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel
MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.
Despite the compact components, the board has full 2.5 kV isolation and maintains 3 mm creepage.
Board dimensions are approx. 2 in. by 0.5 in.
- Part Number:
- SMPS2-01
- Quantity in Stock:
- 8
$199.95
SMPS1-01: IL711/IL610 MSOP Isolated 2.5W SMPS Demo Board
This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode
power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.
The output is 3.3V at 750 mA.
The board has three channels of isolation to ensure the output is electrically isolated from the
input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel,
failsafe, MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.
Despite the compact components, the board has 1.2 kV isolation and maintains 3 mm creepage.
Board dimensions are approx. 2 in. by 0.5 in.
- Part Number:
- SMPS1-01
- Quantity in Stock:
- 6
$199.95
SM324-10E: Ultraprecise Smart TMR Magnetometer, I2C, DFN6
The SM324-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with
sophisticated digital signal processing for unmatched accuracy and precision. An I²C interface provides data as well as an external programming interface, and a digital output provides precise, programmable thresholds.
Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for
optimal current sensing and easy mechanical interfaces. Key features include:
• -2 to +2 mT
• Detects polarity
• Can detect magnets more than 50 mm away
• I²C and digital threshold outputs
• 24-bit output resolution
• In-plane sensitivity more usable than Hall effect sensors
• Programmable offset and gain compensation
• Calibrated internal temperature sensor
• Internal temperature compensation
• 1.68 to 3.6 volt supply
• Ultraminiature 2.5 x 2.5 x 0.8 mm DFN package
- Part Number:
- SM324-10E
- Quantity in Stock:
- 338
$6.88
SM324-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM324-10E 0 to 1.5 mT precision Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and has a sophisticated I2C interface.
- Part Number:
- SM324-10E-EVB01
- Quantity in Stock:
- 48
$19.95
SM228-10E: Smart TMR Magnetometer, 15 mT, I2C, TDFN6
The SM228-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with
sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface.
Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for
optimal current sensing and easy mechanical interfaces. Key features include:
• 0 to 150 Oe / 0 to 15 mT linear range
• Can detect magnets more than 50 mm away
• I2C interface
• Programmable digital threshold output
• 2% of full-scale accuracy for 0 to 125°C
• Fast 10000 sample-per-second update rate
• Factory calibrated
• Programmable offset and gain compensation
• -40°C to +125°C operating range
• Ultraminiature 2.5 x 2.5 mm DFN6 package
- Part Number:
- SM228-10E
- Quantity in Stock:
- 112
$6.88
SM228-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM228-10E 0 to 1.5 mT Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use I2C interface and a digital threshold output.
- Part Number:
- SM228-10E-EVB01
- Quantity in Stock:
- 50
$19.95
SM225-10E: High-Speed Smart TMR Magnetometer, 15mT, SPI, TDFN6
The SM225-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with
sophisticated digital signal processing for a unique combination of speed and precision. An SPI interface provides data as well as an external programming interface.
Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for
optimal current sensing and easy mechanical interfaces. Key features include:
• 0 to 150 Oe / 0 to 15 mT linear range
• Can detect magnets more than 50 mm away
• SPI interface
• 2% of full-scale accuracy for 0 to 125°C
• Fast 15000 sample-per-second update rate
• Factory calibrated
• Programmable offset and gain compensation
• -40°C to +125°C operating range
• Ultraminiature 2.5 x 2.5 mm TDFN package
- Part Number:
- SM225-10E
- Quantity in Stock:
- 637
$6.88
SM225-10E-EVB01: SPI 1.5 mT TMR Smart Sensor Breakout Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM225-10E 0 to 1.5 mT Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use SPI interface.
- Part Number:
- SM225-10E-EVB01
- Quantity in Stock:
- 50
$19.95
SM223-10E: High-Speed Smart TMR Magnetometer, 1.5mT, I2C, TDFN6
The SM223-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with
sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface, and allows setting a versatile digital threshold output.
Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for
optimal current sensing and easy mechanical interfaces. Key features include:
• 0 to 1.5 mT linear range
• Can detect magnets more than 150 mm away
• Simple I2C interface
• Programmable digital threshold output
• 2% of full-scale accuracy for 0 to 125°C
• Fast 10000 sample-per-second update rate
• Factory calibrated
• Programmable offset and gain compensation
• -40°C to +125°C operating range
• Ultraminiature 2.5 x 2.5 mm DFN6 package
- Part Number:
- SM223-10E
- Quantity in Stock:
- 5
$6.88
SM223-10E-EVB02: I2C 1.5 mT TMR Smart Current Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) noncontact current sensor evaluation board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor configured over a current-sensing circuit board trace.
The board has a pre-soldered sensor, screw terminals for the current trace, a standard 0.1" (2.54 mm) header, and a 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
- Part Number:
- SM223-10E-EVB02
- Quantity in Stock:
- 50
$19.95
SM223-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
- Part Number:
- SM223-10E-EVB01
- Quantity in Stock:
- 50
$19.95
SM125-10E: General-Purpose 4 mT Smart GMR Magnetometer, TDFN6
The SM125-10E Smart Magnetometer combines an omnipolar GMR sensor element with
with easy-to-use digital signal processing.
A digital output provides precise, programmable thresholds.
An I²C interface provides magnetic field data, as well as a
calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.
All commands, data, and coefficients are a single byte, and a
slick, elegant data structure lets you get up and running with
a minimum of firmware.
Key features include:
• Can detect magnets more than 50 mm away
• I²C and digital threshold outputs
• 0-4 mT linear range
• 8-bit / 1% output resolution
• −40°C to +125°C operating range
• 5% FS accuracy for 0 to 85°C
• 10 kSps sample rate for fast response
• 6 mA typical supply current
• In-plane sensitivity more usable than Hall effect sensors
• Programmable offset and gain compensation
• Optional magnet temperature compensation
• 2.2 to 3.6 volt supply
• Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package
- Part Number:
- SM125-10E
- Quantity in Stock:
- 2374
$6.88
SM125-10E-EVB01: I2C 4 mT GMR Smart Sensor Breakout Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM125-10E 0 to 4 mT Smart GMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
- Part Number:
- SM125-10E-EVB01
- Quantity in Stock:
- 50
$19.95
SM124-10E: General-Purpose 1 mT Smart GMR Magnetometer, TDFN6
The SM124-10E Smart Magnetometer combines an omnipolar GMR sensor element with
with easy-to-use digital signal processing.
A digital output provides precise, programmable thresholds.
An I²C interface provides magnetic field data, as well as a
calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.
All commands, data, and coefficients are a single byte, and a
slick, elegant data structure lets you get up and running with
a minimum of firmware.
Key features include:
• Can detect magnets more than 50 mm away
• I²C and digital threshold outputs
• 0-1 mT linear range
• 8-bit / 1% output resolution
• −40°C to +125°C operating range
• 5% FS accuracy for 0 to 85°C
• 10 kSps sample rate for fast response
• 6 mA typical supply current
• In-plane sensitivity more usable than Hall effect sensors
• Programmable offset and gain compensation
• Optional magnet temperature compensation
• 2.2 to 3.6 volt supply
• Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package
- Part Number:
- SM124-10E
$6.88
SM124-10E-EVB01: I2C 1 mT GMR Smart Sensor Breakout Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM124-10E 0 to 1 mT Smart GMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
- Part Number:
- SM124-10E-EVB01
- Quantity in Stock:
- 50
$19.95
SHIELD01-01: 40V/50A H-Bridge Arduino Shield Eval Board
This Arduino Shield board implements an H-bridge power converter using four power MOSFETs, four IL610CMTI-1E
ultrahigh CMTI isolated MOSFET drivers, and two ILDC13-15E ultraminiature isolated DC-to-DC convertors.
The board is rated for 40 volts and 50 amps, to control
up to two-kilowatt loads.
Example programs are available via our GitHub Repository.
Key features of the board are:
• A Simple three-wire Arduino interface (PWM, Dir, and Enable)
• Heat-sinking and thermal vias
• Standard Arduino Shield form factor outline
• Easy connections with large screw terminals
Specifications:
• Max. load: 2 kW (40 V / 50 A)
• Load supply line: 8 to 40 V
• Arduino input supply: 5V or 7 V to 20 V, 500 mA max.
• Logic-to-load isolation: 2.5 kV per UL 1577
• Operating Temperature Range: -40 °C to 85 °C
• Dimensions: 2.1 in. by 2.7 in. (53.4 mm by 68.6 mm)
Applications:
• Motor speed and direction control
• Robotics
• DC-to-AC invertors
- Part Number:
- SHIELD01-01
- Quantity in Stock:
- 17
$195.95
NVE logo USB flash drive
NVE-branded 2 GB rotate-cover USB flash drive. NVE is named for nonvolatile electronics.
- Part Number:
- Merch-USB-0001
- Quantity in Stock:
- 210
$8.95
NVE logo knit pom pom beanie hat, blue
Knit pom pom beanie hat, blue with white NVE logo. 12 inches long with a 3 inch cuff, 100% acrylic. We know spintronics and how to keep warm in the winter.
- Quantity in Stock:
- 10
$24.95
NVE logo knit beanie hat, white
Knit beanie hat, white with blue NVE logo. 12 inches long with a 3 inch cuff, 100% acrylic. We know spintronics and how to keep warm in the winter.
- Quantity in Stock:
- 10
$23.95
NVE logo coffee cup
NVE-branded "Leaders in Practical Spintronics" 11 oz ceramic mug (NVE is driven by spintronics and caffeine).
- Part Number:
- Merch-CUP-0001
- Quantity in Stock:
- 18
$13.95
