New Products
ADL924-14E: 2.8 mT, 3V Nanopower GMR Switch, ULLGA
NVE's ADL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments
- Part Number:
- ADL924-14E
- Quantity in Stock:
- 11150
$5.15
ADT001-10E: High Hysteresis, Rotation Quadrant Sensor w/high-field detection, TDFN6
ADT001-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. An additional output indicates a fault if the magnetic field is too high. The ADT001 is high hysteresis for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- ADT001-10E
- Quantity in Stock:
- 29519
$11.17
ADT002-10E: Low Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6
ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. The ADT002 is lower hysteresis than the ADT005 to provide accurate, absolute rotational quadrant information. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- ADT002-10E
- Quantity in Stock:
- 15300
$11.17
ADT005-10E: High Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6
ADT005-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.
The ADT005 is higher hysteresis than the ADT002 for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction.
To minimize power, the ADT005 does not include
the high-field detection circuitry included in the ADT001 version, and is slightly less accurate due to lower-power circuitry.
The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.
The sensors are typically used with
radially-magnetized disk magnets or split pole magnet.
An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- ADT005-10E
- Quantity in Stock:
- 60200
$10.61
ADT922-14E: 4.5 mT, 3V Nanopower TMR Switch, ULLGA
NVE's ADT922-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 4.5 mT (45 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Security Wearables
- Part Number:
- ADT922-14E
- Quantity in Stock:
- 876
$5.67
ADT923-14E: 3.2 mT, 3V Nanopower TMR Switch, ULLGA
NVE's ADT923-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 3.2 mT (32 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Wearables
- Part Number:
- ADT923-14E
$5.67
ADT924-14E: 2.2 mT, 3V Nanopower TMR Switch, ULLGA
NVE's ADT924-14E Nanopower Switch integrates GMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 2.2 mT (22 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Wearables
- Part Number:
- ADT924-14E
$5.67
ADT925-14E: 1.5 mT, 3V Nanopower TMR Switch, ULLGA
NVE's ADT925-14E Nanopower Switch integrates GMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 1.5 mT (15 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Wearables
- Part Number:
- ADT925-14E
- Quantity in Stock:
- 602
$5.67
ADV001-00E: 0.4 mT Bipolar Switch, RoHS MSOP
NVE's ADV001-00E is a GMR Digital Switch using a bipolar output GMR material.
This material allows the sensor to maintain an operate point with the application
of a negative (South) magnetic field, and a release point with the application
of a positive (North) magnetic field. The part is ideal for use with magnetic
encoders that have alternating North/South poles, or in any other application
where one polarity of field is required to turn the part on, and the opposite
polarity is required to turn it off.
Features:
Bipolar Operation (south field ON, north field OFF)
Extremely Sensitive Magnetic Operate Point -- 4 Oersteds
Digital Output
Frequency Response to >100 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Pneumatic Cylinder Position Sensing
Speed Sensing
Supply
Voltage
min.-max.
Supply
Current
(mA)
min.-max.
Op./
Release
(Oe)
ON|OFF
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
4.5-30.0
2.5-4.5
4|-4
2
0.4
Current Sink
FCMe
Cross axis
MSOP8
(Pb)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- ADV001-00E
- Quantity in Stock:
- 32353
$3.75
AET050F-00E: 0.5 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET050F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET050F-00E
$6.88
AET075F-00E: 0.75 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET075F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET075F-00E
$6.88
AET100F-00E: 1 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET100F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET100F-00E
$6.88
AET120F-00E: 1.2 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET120F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET120F-00E
$6.88
AET500-02E: 5 mm, Half-Bridge TMR Rotational / Linear Sensor, SOIC
AET500-02E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The half-bridge configuration maximizes noise immunity and provides large 300 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET500-02E
- Quantity in Stock:
- 1822
$5.67
AFL000-00E: 1 mT Digital Switch, 0.9 V – 2 V, Norm OFF Sinking
NVE's AFL000-00E low power switch sensor integrates GMR sensor elements with digital
onboard signal processing electronics. The switch is designed for use in low power
and battery applications, and features supply voltages down to 0.9 Volts and
continuous operation at currents of 20-55 microamps. Like all NVE magnetic sensors,
the AFL sensors have extremely precise magnetic operate and release points.
Features:
Precision Magnetic Operate Point -- 10 Oersteds
Low Voltage -- 0.9 V
Low Power
Digital Output
Frequency Response 0 to 250 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Single Battery Applications
Low Power, Low Field Applications
Supply
Voltage
min.-max.
Supply
Current
(µA)
min.-max.
Op. Point
(Oe)
min.-max.
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
0.9-1.3
20-55
7-13
1
0.4
Current Sink
PBBe
Cross axis
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AFL000-00E
- Quantity in Stock:
- 3387
$9.25
AFL006-10E: 0.4 mT Digital Sw, 0.9 V – 2 V, Norm OFF Sinking, TDFN
The AFL006-10E is the world's most sensitive magnetic switch. The switch is designed for use in low power and battery applications. It can operate from a single cell with supplies as low as 0.9 V and typical supply current of 55 microamps. Like all NVE magnetic sensors, the AFL006-10E has extremely precise magnetic operate and release points. Features: 4 Oe typical operate point for ultrahigh sensitivity 0.9 V – 2 V operating voltage for single-cell battery operation Less than 100 microwatts power consumption 2.5 mm x 2.5 mm x 0.8 mm TDFN6 for miniaturization Applications include: Portable instruments Utility meters Noncontact overcurrent protection Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.
- Part Number:
- AFL006-10E
- Quantity in Stock:
- 225
$9.25
AFL100-10E: 1 mT Digital Sw, 1.8 V – 2.5 V, Norm OFF Sinking, TDFN
NVE's AFL100-10E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds (1 mT) Low Power Digital Output Ultraminiature 2.5 mm x 2.5 mm TDFN Package Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.
- Part Number:
- AFL100-10E
- Quantity in Stock:
- 2232
$9.25
AFL200-00E: 1 mT Digital Switch, 2.7 V – 3.6 V, Norm OFF Sinking
NVE's AFL200-00E low power switch sensor integrates GMR sensor elements with digital
onboard signal processing electronics. The switch is designed for use in low power
and battery applications, and features supply voltages down to 2.7 Volts
and continuous operation at currents of 20-55 microamps. Like all NVE magnetic
sensors, the AFL sensors have extremely precise magnetic operate and release points.
Features:
Precision Magnetic Operate Point -- 10 Oersteds
Normally OFF Current Sinking Digital Output
Frequency Response 0 to 250 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Low Power Applications
Low Field Applications
Supply
Voltage
min.-max.
Supply
Current
(µA)
min.-max.
Op. Point
(Oe)
min.-max.
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
2.7-3.6
20-55
7-13
1
0.4
Current Sink
PBGe
Cross axis
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AFL200-00E
- Quantity in Stock:
- 66
$9.25
AG001-01E: GMR Analog Sensor Evaluation Kit
The AG001-01E GMR Analog Sensor Evaluation Kit is designed for experimentation and development. The kit contains an assortment of 14 NVE analog sensors plus several printed circuit boards and various permanent magnets. It includes the high-sensitivity AAH002 sensor. The kit contains only RoHS compliant parts.
- Part Number:
- AG001-01E
- Quantity in Stock:
- 13
$60.00
AG004-06: SOIC8 Printed Circuit Board (3" x 0.3")
A 3 x 0.3 inch (76 x 8 mm) PCB to demonstrate AA-Series SOIC sensors (-02E suffix; order sensors separately).
This PCB is also included in the AG001-01 Sensor Evaluation Kit.
- Part Number:
- AG004-06
- Quantity in Stock:
- 1351
$4.25
