New Products

Displaying 201 to 220 (of 446 products)
ALT025-14E: 0-10 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, DFN4

The ALT025-14E is an ultraminiature Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with an extraordinary amount of signal. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: Tunneling Magnetoresistive Technology (TMR) Large signals (22.5 mV/V/mT typical) Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power ±10 mT linear range 1.1 x 1.1 mm DFN4 package –40 to 125°C Applications: Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics

Part Number:
ALT025-14E
Quantity in Stock:
2787

$12.00

ALT025-14E-EVB01: 0-10 mT DFN4 TMR magnetometor breakout board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.

Part Number:
ALT025-14E-EVB01
Quantity in Stock:
59

$19.95

ALT026-10E: 0-20 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT026 is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with extraordinary signal amplitude and wide linear range. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. The ALT025 has cross-axis sensitivity (across the pads). Features: Large signal (200 mV/V) Wheatstone bridge magnetometer configuration 0 - 10 V power supply 20 kiloohm device resistance for low power ±20 mT (±200 Oe) linear range High linearity output (

Part Number:
ALT026-10E
Quantity in Stock:
227

$12.00

ALT026-10E-EVB01: 0-20 mT DFN6 TMR magnetometor breakout board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT026-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.

Part Number:
ALT026-10E-EVB01
Quantity in Stock:
55

$19.95

ALT521-10E: Ultrasensitive Two-Axis Rotational Sensor, TDFN6

ALT521-10E Rotational Sensors are Tunneling Magnetoresistance (TMR) Wheatstone bridge sensors with large voltage signal, wide linear range, and ultraminiature package size. The sensor has two half-bridge outputs for absolute angle detection or both X- and Y-axis magnetic field detection. The outputs are bipolar, meaning they are positive for a positive field and negative for a negative magnetic field polarity. Key specifications are:
  • High sensitivity (140 mV/V/mT)
  • ±0.5 mT linear range
  • Highly linear output (typ. 2% of full scale)
  • Low temperature coefficient of output (0.1%/°C)
  • 100 kHz frequency bandwidth
  • 2 megohm typ. device resistance for low power
  • Operation to near-zero supply voltage
  • Up to 125 °C operating temperature
  • 2.5 x 2.5 mm DFN6 package

Part Number:
ALT521-10E
Quantity in Stock:
3990

$8.94

ALT521-10E-EVB01: Ultrasensitive Two-Axis Rotational Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT521-10E 2 MOhm Tunneling Magnetoresistance (TMR) Ultrasensitive Two-Axis Rotational Sensor.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.

Part Number:
ALT521-10E-EVB01
Quantity in Stock:
52

$19.95

ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6

ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

A four-wire SPI interface provides angle data and allows setting device parameters.

The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR002-10E
Quantity in Stock:
39

$8.98

ASR002-10E-EVB01: SPI TMR Smart Angle Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ASR002-10E Smart Tunneling Magnetoresistance (TMR) angle sensor.

The board has a pre-soldered sensor, bypass capacitor as recommended, a standard 0.1" (2.54 mm) header and a mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use SPI interface.

Part Number:
ASR002-10E-EVB01
Quantity in Stock:
27

$19.95

ASR012-10E: Smart I²C TMR Angle Sensor, TDFN6

ASR012 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR012 provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

An I²C interface provides angle data and allows setting device parameters. A PWM output is also provided

The ASR012 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR012-10E

$8.98

ASR012-10E-EVB01: I2C TMR Smart Angle Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ASR012-10E Smart Tunneling Magnetoresistance (TMR) angle sensor.

The board has a pre-soldered sensor, bypass capacitor as recommended, a standard 0.1" (2.54 mm) header and a mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface.

Part Number:
ASR012-10E-EVB01
Quantity in Stock:
25

$19.95

ASR022-10E: ABZ Noncontact TMR Encoder Sensor, TDFN6

ASR022 noncontact TMR encoder sensors provide precise pulses indicating angular motion, and is more accurate and smaller than other non-contact encoders.

An ABZ interface allows the ASR022 to replace legacy optical encoders.

The sensor combines precise, low-power Tunneling Magnetoresistance (TMR) sensing elements with sophisticated digital signal processing.

The sensor is factory calibrated, with coefficients stored in internal memory.

The ASR022 is designed for harsh industrial or automotive environments with ESD protection, and full −40 °C to 125 °C operating temperature range.

Part Number:
ASR022-10E
Quantity in Stock:
713

$8.98

ASR022-10E-EVB01: ABZ TMR Smart Angle Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ASR022-10E Smart Tunneling Magnetoresistance (TMR) angle sensor.

The board has a pre-soldered sensor, bypass capacitor as recommended, a standard 0.1" (2.54 mm) header and a mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an encoder-compatible ABZ interface.

Part Number:
ASR022-10E-EVB01
Quantity in Stock:
25

$19.95

DB001-00E: Signal Processing IC MSOP

NVE's DB001-00E signal processing IC is designed to work with NVE's AD9xx series GMR switch with short circuit protection. This combination provides a high-current switched output that corresponds to the sensor input. The DB001-00E functions as the front end of a complete sensor assembly, and includes protection against short circuits and high voltage transients from capacitive and inductive loads. The parts also feature thermal shutdown circuitry and reverse battery protection. They provide a regulated output voltage for the sensor and other components in the assembly, and an LED driver to indicate an "ON" condition. Features: High Current Output Reverse Battery and Transient Protection LED Driver Excellent Temperature and Voltage Performance Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 when purchased in quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
DB001-00E
Quantity in Stock:
6659

$4.25

DB002-02E: Signal Processing IC SOIC8

NVE's DB002-02 signal processing IC is designed to work with NVE's AD1xx series GMR switch as well as any other current sourcing or CMOS/TTL digital output sensor element, such as an inductive sensor or a photo sensor. This combination provides a high current switched output that corresponds to the sensor input. The DB002-02 functions as the front end of a complete sensor assembly, and includes protection against short circuits and high voltage transients from capacitive and inductive loads. The parts also feature thermal shutdown circuitry and reverse battery protection. It provides a regulated output voltage for the sensor and other components in the assembly, and an LED driver to indicate an "ON" condition. Features: High Current Output Reverse Battery and Transient Protection LED Driver Excellent Temperature and Voltage Performance Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 92 for quantities of 92 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
DB002-02E
Quantity in Stock:
484

$4.25

DC001-10E: 3.3V High-Temp Voltage Regulator

The DC001-10E 3.3 V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 3.3V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC001-10E
Quantity in Stock:
11347

$2.50

DC002-10E: 5V High-Temp Voltage Regulator

The DC001-10E 5V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 5V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC002-10E
Quantity in Stock:
57

$2.50

IL011-3E: Low-Power, 2-Channel (both same direction) Isolator, 2.5 kV, SOIC8

The IL011-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.

Part Number:
IL011-3E

$6.29

IL012-3E: Low-Power, 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL012-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.

Part Number:
IL012-3E
Quantity in Stock:
19

$6.29

IL015E: Low-Power, 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL015E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL015E
Quantity in Stock:
637

$8.23

IL016E: Low-Power, 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC

The IL016E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL016E
Quantity in Stock:
81

$8.23

Displaying 201 to 220 (of 446 products)