Angle Sensors
AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6
AAT001-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce
a very high output signal without amplification, a wide airgap tolerance, and
very high device resistance for extremely low power. Sine and cosine outputs provide
full quadrature.
Key specifications are as follows:
TMR Angle Sensor
Typ. p-p
Signal
Min. Applied
Field (Oe)
Max. Angular
Error (const. field)
Max. Op.
Temp.
Typ. Device
Resistance
Package
200 mV/V
30 Oe
0.5 degrees
125°C
1.25 MΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- AAT001-10E
- Quantity in Stock:
- 193907
$8.94
AAT003-10E: Angle Sensor, 40 kOhm, TDFN6
AAT003-10E
Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very
high output signal without amplification, a wide airgap tolerance, and low power. Sine and cosine outputs provide full quadrature. The sensor has a 40 kilohm device
resistance and 20 kilohm output impedance, which is ideal for direct interface to microcontrollers.
Key specifications are as follows:
TMR Angle Sensor
Typ. p-p
Signal
Min. Applied
Field (Oe)
Max. Angular
Error (const. field)
Max. Op.
Temp.
Typ. Device
Resistance
Package
200 mV/V
30 Oe
0.5 degrees
125°C
40 kΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
- Part Number:
- AAT003-10E
- Quantity in Stock:
- 4180
$8.94
AAT006-10E: Low-Field Angle Sensor, TDFN6
AAT006-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for operation at magnetic fields as low as 15 Oe, allowing an extremely wide airgap tolerance. The device has a large output without amplification, and high device resistance for low power. Sine and cosine outputs provide full quadrature.
Key specifications are as follows:
TMR Angle Sensor
Typ. p-p
Signal
Min. Applied
Field (Oe)
Max. Angular
Error (const. field)
Max. Op.
Temp.
Typ. Device
Resistance
Package
200 mV/V
15 Oe
0.5 degrees
125°C
1.25 MΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
- Part Number:
- AAT006-10E
- Quantity in Stock:
- 100
$8.94
AAT009-10E: Angle Sensor, 6 MOhm, TDFN6
AAT009-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for ultralow power, high output signal, and a wide airgap tolerance. Sine and cosine outputs provide
full quadrature. The AAT009-10E version has the highest device resistance in the AAT product family (6 megaohms typ.), for the lowest power consumption.
Key specifications are as follows:
TMR Angle Sensor
Typ. p-p
Signal
Min. Applied
Field (Oe)
Max. Angular
Error (const. field)
Max. Op.
Temp.
Typ. Device
Resistance
Package
200 mV/V
30 Oe
0.5 degrees
125°C
6 MΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
- Part Number:
- AAT009-10E
- Quantity in Stock:
- 3869
$8.94
AAT101-10E: Full-Bridge Angle Sensor, 625 kOhm, TDFN6
AAT101-10E Angle Sensors use a Tunneling Magnetoresistance (TMR)
full-bridges to produce a very high output signal without amplification. The sensors also have a wide
airgap tolerance and high device resistance for low power. Sine
and cosine outputs provide full quadrature.
Key specifications are as follows:
Full-Bridge TMR Angle Sensor
Typ. p-p
Signal
Configuration
Min. Applied
Field
Nonsinusoidality
accuracy
Max. Op.
Temp.
Typ. Device
Resistance
Package
400 mV/V
Full bridge
30 Oe
1.5%
125°C
625 kΩ
TDFN6
The angle sensors are typically used with a split pole magnets such as
NVE part no. 12249 or 12426.
An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- AAT101-10E
- Quantity in Stock:
- 8880
$8.94
ADT002-10E: Low Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6
ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. The ADT002 is lower hysteresis than the ADT005 to provide accurate, absolute rotational quadrant information. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- ADT002-10E
- Quantity in Stock:
- 43536
$11.18
ADT005-10E: High Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6
ADT005-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.
The ADT005 is higher hysteresis than the ADT002 for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction.
To minimize power, the ADT005 does not include
the high-field detection circuitry included in the ADT001 version, and is slightly less accurate due to lower-power circuitry.
The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.
The sensors are typically used with
radially-magnetized disk magnets or split pole magnet.
An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture.
Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.
- Part Number:
- ADT005-10E
- Quantity in Stock:
- 50000
$11.18
ALT521-10E: Ultrasensitive Two-Axis Rotational Sensor, TDFN6
ALT521-10E Rotational Sensors are Tunneling Magnetoresistance (TMR) Wheatstone
bridge sensors with large voltage signal, wide linear range, and ultraminiature
package size. The sensor has two half-bridge outputs for absolute angle detection
or both X- and Y-axis magnetic field detection. The outputs are bipolar, meaning
they are positive for a positive field and negative for a negative magnetic field
polarity. Key specifications are:
• High sensitivity (140 mV/V/mT)
• ±0.5 mT linear range
• Highly linear output (typ. 2% of full scale)
• Low temperature coefficient of output (0.1%/°C)
• 100 kHz frequency bandwidth
• 2 megohm typ. device resistance for low power
• Operation to near-zero supply voltage
• Up to 125 °C operating temperature
• 2.5 x 2.5 mm DFN6 package
- Part Number:
- ALT521-10E
- Quantity in Stock:
- 3990
$8.94
ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6
ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.
The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.
The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.
The sensor is factory calibrated, with coefficients stored in
internal memory.
A four-wire SPI interface provides angle data and allows
setting device parameters.
The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.
- Part Number:
- ASR002-10E
- Quantity in Stock:
- 39
$8.98
ASR012-10E: Smart I²C TMR Angle Sensor, TDFN6
ASR012 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.
The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.
The ASR012 provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.
The sensor is factory calibrated, with coefficients stored in
internal memory.
An I²C interface provides angle data and allows
setting device parameters. A PWM output is also provided
The ASR012 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.
- Part Number:
- ASR012-10E
$8.98
ASR022-10E: ABZ Noncontact TMR Encoder Sensor, TDFN6
ASR022 noncontact TMR encoder sensors provide precise pulses indicating angular motion, and is more accurate and smaller than other non-contact encoders.
An ABZ interface allows the ASR022 to replace legacy optical encoders.
The sensor combines precise, low-power Tunneling Magnetoresistance (TMR) sensing elements with sophisticated digital signal processing.
The sensor is factory calibrated, with coefficients stored in internal memory.
The ASR022 is designed for harsh industrial or automotive environments with ESD protection, and full −40 °C to 125 °C operating temperature range.
- Part Number:
- ASR022-10E
- Quantity in Stock:
- 713
$8.98
