A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM324-10E 0 to 1.5 mT precision Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and has a sophisticated I2C interface.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM228-10E 0 to 1.5 mT Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use I2C interface and a digital threshold output.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM225-10E 0 to 1.5 mT Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use SPI interface.
A 0.8 x 0.4 inch (21 x 10 mm) noncontact current sensor evaluation board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor configured over a current-sensing circuit board trace.
The board has a pre-soldered sensor, screw terminals for the current trace, a standard 0.1" (2.54 mm) header, and a 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM125-10E 0 to 4 mT Smart GMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM124-10E 0 to 1 mT Smart GMR magnetometer sensor.
The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.
Arduino Shield02 demonstrates NVE ALT521 or AAT-, ADT- and ASR-Series angle/rotation sensors. The Shield connects via an edge connector to a sensor breakout board. Sixty LEDs indicate the angle, and colors indicate direction of rotation.
A diametrically-magnetized neodymium magnet is included, and a magnet fixture allows the magnet to be positioned on-axis or in one of three off-axis positions.
Arduino not included; breakout boards sold separately. The Shield is compatible with the following breakout boards:
ALT521-10E-EVB01:
Ultrahigh sensitivity analog angle sensor
AAT003-10E-EVB01:
Low output impedance analog angle sensor
AAT006-10E-EVB01:
High-sensitivity analog angle sensor
ADT002-10E-EVB01:
Digital output quadrature rotation sensor
ASR002-10E-EVB01:
SPI interface factory-calibrated angle sensor
ASR012-10E-EVB01:
I²C interface factory-calibrated angle sensor
ASR022-10E-EVB01:
ABZ Encoder Sensor
Arduino Software and detailed documentation can be downloaded from NVE's GitHub repository.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT026-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT024-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
This evaluation board measures zero to seven amps with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.
The board has a sensor plus 1/4" screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.
The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.
The board measures 2.0" x 1.9" x 0.63" (52 x 48 x 1.6 mm)
This evaluation board measures zero to seven amps with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.
The board has a sensor plus screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.
The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.
The board measures 0.9" x 0.5" x 0.063" (22 x 12 x 1.6 mm)
This evaluation board measures zero to one amp with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.
The board has a sensor plus screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.
The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.
The board measures 0.9" x 0.5" x 0.063" (22 x 12 x 1.6 mm)
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT023-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.