Products meeting the search criteria
IL4822E: Isolated RS422 Transceiver w/3.3-5V DC-DC Convertor, 2.5 kV, Wide SOIC
The IL4822 is an isolated, full-duplex 40 Mbps 5-volt bus RS-422 / RS-485 transceiver with an integrated 3.3V-to-5V DC-DC convertor.
The transceiver runs up to 40 Mbps, has a 1/5 Unit Load.
The DC-DC convertor can output up to 50 mA and is fully regulated.
2500 VRMS isolation; 16.5 kV bus ESD protection; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL4822E
- Quantity in Stock:
- 806
$9.32
IL614E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Wide SOIC
The IL613-3E is a 3.3/5V, 3-channel (2 transmit, 1 receive), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop GMR Sensor technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.3" SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL614E
- Quantity in Stock:
- 803
$6.99
IL3685TE: 40 Mbps Isolated RS485 Transceiver, 125C, 2.5kV, Wide SOIC
The IL3685 is an isolated 40 Mbps RS-485 transceiver with an extended temperature range. Over-temperature protection; fully PROFIBUS compliant; 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL3685TE
- Quantity in Stock:
- 698
$6.07
IL485: Isolated RS485/PROFIBUS Transceiver, 2.5 kV, Wide SOIC (Pb)
Galvanically-isolated high-speed RS-485 differential bus transceiver with 2500 Vrms isolation, 2 kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package.
- Part Number:
- IL485
- Quantity in Stock:
- 690
$14.57
IL015E: Low-Power, 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC
The IL015E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL015E
- Quantity in Stock:
- 651
$8.23
ILDC11VE: 6 kV Isolation 1/4W 3.3-to-3.3V DC-DC Conv Wide SOIC
The ILDC11VE is a miniature, one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor. The part can be used to generate an isolated 3.3-volt bus supply from a controller supply.
NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide best-in-class 6 kV isolation and virtually unlimited barrier life.
The unique True-8(TM) package provides true eight-millimeter creepage in accordance with IEC60601. Maximum 5 mV peak-to-peak ripple means low noise.
The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.
Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.
A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.
- Part Number:
- ILDC11VE
- Quantity in Stock:
- 524
$5.98
IL41050TTE: Basic Isolated CAN Transceiver, 2.5 kV, Wide SOIC
The IL41050TT is a low-cost, basic CAN transceiver without Vref output and silent mode input pins. 2.5kV isolation; 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.
- Part Number:
- IL41050TTE
- Quantity in Stock:
- 410
$3.62
IL816TE: 4-Channel (2 each direction) Top-of-the-Line Isolator, 2.5 kV, Wide SOIC
The IL816TE is NVE's top-of-the-line four-channel isolator (2 each direction), with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint
The part uses NVE's unique True 8 eight-millimeter creepage 16-pin wide-body SOIC package.
- Part Number:
- IL816TE
- Quantity in Stock:
- 361
$8.40
IL422: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC (Pb)
Galvanically-isolated full-duplex RS-422 interface in a 0.3" 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity.
- Part Number:
- IL422
- Quantity in Stock:
- 94
$14.57
IL3085TE: 4 Mbps Isolated RS485 Transceiver, 125C, 2.5kV, Wide SOIC
The IL3085TE is an isolated 4 Mbps RS-485 transceiver with an extended temperature range. Compatible with 3.3 V or 5 V input logic. 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL3085TE
- Quantity in Stock:
- 85
$5.56
IL016E: Low-Power, 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC
The IL016E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL016E
- Quantity in Stock:
- 81
$8.23
IL3685T-01: 40Mbps, 125C Isolated Xcvr Eval Bd, Wide SOIC
These 2 x 3.5-inch (50 x 90 mm) boards include an IL3685TE isolated RS-485 transceiver,
a termination resistors, power-supply bypass capacitors as recommended, screw
connections, provisions for header pins, and a DB9 bus connector for PROFIBUS.
The IL3685TE is the world's fastest isolated transceiver with data rates to 40 Mbps, is fully PROFIBUS compatible, including the stringent bus differential specifications, and is rated to a full 125C.
- Part Number:
- IL3685T-01
- Quantity in Stock:
- 50
$49.95
IL715-01: 4-Ch (all same dir) Wide-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715E four-channel (all the same direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL715-01
- Quantity in Stock:
- 50
$49.95
IL715V-01: 4-Ch (all same dir) Wide-Body 7 kV Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.
- Part Number:
- IL715V-01
- Quantity in Stock:
- 50
$49.95
IL716-01: 4-Ch (2 ea dir) Wide-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL716E four-channel (two each direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL716-01
- Quantity in Stock:
- 50
$49.95
IL721E: Widebody 2-Channel (1 each direction) Isolator, 2.5 kV, Wide SOIC
The IL721 is a high speed bidirectional isolator in NVE's unique True 8 mm creepage wide-body package. 110 Mbps, 100C, 10 ns propagation delay, 3 ns pulse width distortion. 16-pin True 8(TM) wide SOIC.
- Part Number:
- IL721E
- Quantity in Stock:
- 39
$5.83
IL261VE: 6 kV, 5-Channel (4 transmit, 1 receive) Isolator, Wide SOIC
The IL261VE is a 6 kVrms isolation, 3.3/5V, 5 channel (4 transmit; 1 receive) isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin RoHS wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL261VE
- Quantity in Stock:
- 11
$9.40
IL3222E: Fractional Load Passive-Input Isolated RS422 Xcvr, 2.5 kV, Wide SOIC
Isolated 1/8 fractional load RS422 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information
- Part Number:
- IL3222E
- Quantity in Stock:
- 4
$4.12
IL3585-01: RS-485 Wide-Body Isolator Evaluation Board
The RS-485 Wide-Body Isolator Evaluation Board provides a complete isolated RS-485 node using the popular 0.3" (8 mm) creepage IL3585E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.
Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.
The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.
Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.
- Part Number:
- IL3585-01
- Quantity in Stock:
- 4
$74.95
IL41050WB-01: Isolated Wide-Body CAN Evaluation Board
The isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using NVE's popular IL41050TAE isolated wide-body CAN transceiver with true 8mm creepage.
The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.
- Part Number:
- IL41050WB-01
- Quantity in Stock:
- 4
$49.95
