Products meeting the search criteria
SMPS1-01: IL711/IL610 MSOP Isolated 2.5W SMPS Demo Board
This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode
power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.
The output is 3.3V at 750 mA.
The board has three channels of isolation to ensure the output is electrically isolated from the
input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel,
failsafe, MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.
Despite the compact components, the board has 1.2 kV isolation and maintains 3 mm creepage.
Board dimensions are approx. 2 in. by 0.5 in.
- Part Number:
- SMPS1-01
- Quantity in Stock:
- 6
$199.95
SMPS2-01: 2.5 kV MSOP Isolated 2.5W SMPS Demo Board
This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode
power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.
The output is 3.3V at 750 mA.
The board has three channels of isolation to ensure the output is electrically isolated from the
input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel
MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.
Despite the compact components, the board has full 2.5 kV isolation and maintains 3 mm creepage.
Board dimensions are approx. 2 in. by 0.5 in.
- Part Number:
- SMPS2-01
- Quantity in Stock:
- 8
$199.95
IL710S-1-01: 150 Mbps 1-Ch MSOP Isolator Eval Board
These 2 x 3.5-inch (50 x 90 mm) boards have an IL710S-1E 150 Mbps single-channel (all the same direction) ultraminiature MSOP8 isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest isolators.
- Part Number:
- IL710S-1-01
- Quantity in Stock:
- 50
$49.95
AA004-00E: 5 mT Sat. Analog Sensor, 5 KOhm, RoHS MSOP
NVE's AA004-00E Normalized Output GMR Magnetic Field Sensors have a unique ability
to sense static fields and offer unmatched magnetic sensitivity.
General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources.
Typ. Min. Saturation Field (Oe)
Sensitivity (mV/V/Oe)
Output
Comments
Package
20
0.9 - 1.3
Analog Bridge
Low-Field Measurement
MSOP8 (RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AA004-00E
$9.60
AA006-00E: 5 mT Sat. Analog Sensor, 30 KOhm, RoHS MSOP
NVE's AA006-00E Normalized Output GMR Magnetic Field Sensors have a unique ability
to sense static fields and offer unmatched magnetic sensitivity.
General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources.
Typ. Min. Saturation Field (Oe)
Sensitivity (mV/V/Oe)
Output
Comments
Package
50
0.9 - 1.3
Analog Bridge
0.3mA@9V
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AA006-00E
- Quantity in Stock:
- 4030
$9.60
AA007-00E: 50 mT Sat. Analog Sensor, 5 KOhm, RoHS MSOP
The AA007-00E GMR Magnetic Field Sensors are used to sense relatively high fields.
0.1 mV/V/Oe Sensitivity; 500 Oe Saturation Field; MSOP8.
Note: Parts must be purchased in tube quantities (multiples
of 100) when purchasing quantities of 100 or more. Larger quantities are subject
to NVE's standard lead times.
- Part Number:
- AA007-00E
$9.60
AAH004-00E: 1.5 mT Sat. Analog Sensor, 2 KOhm, RoHS MSOP, 150C
AAH004-00E Normalized Output GMR Field Sensors use a unique high-sensitivity GMR material, making them ideal for low-field applications. They also tolerate extremely high temperatures--up to 150 degrees Celsius.
Features:
Extremely High Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
150 Degrees Celsius Continuous
DC to >1MHz Frequency Response
Applications:
Low Voltage, High Temperature Applications
Low-Field Sensing for Magnetic Media Detection
Earth's Magnetic Field Detection
Current Sensing
General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources.
Typ. Min. Saturation Field (Oe)
Linear Range(|Oe|)
min.-max.
Sensitivity (mV/V/Oe)
min.-max.
Resistance
(Ohms)
Package
15
1.5 - 7.5
3.2 - 4.8
2,000 +/-20%
MSOP8
(Pb)
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AAH004-00E
- Quantity in Stock:
- 1143
$9.60
IL711V-1E: 2.5 kV, 2-Channel (both same direction) Isolator, MSOP
The IL711V-1 is a dual-channel bidirectional, 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.
The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL711V-1E
- Quantity in Stock:
- 18
$6.92
IL712V-1E: 2.5 kV, 2-Channel (1 each direction) Isolator, MSOP
The IL712V-1 is a dual-channel bidirectional 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.
The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL712V-1E
- Quantity in Stock:
- 2908
$6.92
AB001-00E: 25 mT Sat. Gradiometer, 2.5 KOhm, RoHS MSOP
AB001-00E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient
sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing
of small gradients over a wide range of magnetic field strength. The devices
are sensitive only to gradients, and have low sensitivity to constant magnetic
noise.
Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing.
Typ. Min. Saturation Field (Oe)
Linear Range(|Oe|)
min.-max.
Sensitivity (mV/V/Oe)
min.-max.
Resistance
(Ohms)
Package
250
20 - 200
0.02 - 0.03
2,500 +/-20%
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- AB001-00E
- Quantity in Stock:
- 4909
$6.29
ABH001-00E: 7 mT Sat. Gradiometer, 1.2 KOhm, RoHS MSOP
ABH001-00E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing of small gradients over a wide range of magnetic field strength. The devices are sensitive only to gradients with low sensitivity to constant external magnetic noise. This allows these sensors to operate in high noise environments, such as near electric motors or high-current wires.
Key Features:
Extremely High Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Temperature to 150 degrees Continuous
Wide Linear Range of Operation
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
MSOP Package
Applications:
General Differential Field Sensing
Gear Tooth and Encoder Speed and Position Sensing
Low Voltage, High Temperature Applications
Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing.
Typ. Min. Saturation Field (Oe)
Linear Range(|Oe|)
min.-max.
Resistor
Sensitivity
(%R/Oe)
min.-max.
Resistance
(Ohms)
Package
70
5 - 40
0.06 - 0.12
1,200 +/-20%
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
This part is RoHS compliant.
- Part Number:
- ABH001-00E
- Quantity in Stock:
- 4001
$6.29
ABL014-00E: 1 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP
NVE's ABL014-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 1.0 mm apart on the sensor IC, and the two sensors are phase shifted by 0.5 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm, and sensor-to-sensor phase shift is 0.500 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
- Part Number:
- ABL014-00E
- Quantity in Stock:
- 425
$6.29
ABL015-00E: 0.5 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP
NVE's ABL015-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.5 mm apart on the sensor IC, and the two sensors are phase shifted by 0.25 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.500 mm, and phase shift from sensor to sensor is 0.250 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
- Part Number:
- ABL015-00E
- Quantity in Stock:
- 4709
$6.29
ABL016-00E: 0.3 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP
NVE's ABL016-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.3 mm apart on the sensor IC, and the two sensors are phase shifted by 0.15 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.300 mm, and phase shift from sensor to sensor is 0.150 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
- Part Number:
- ABL016-00E
- Quantity in Stock:
- 491
$6.29
IL711S-1E: 150 Mbps 2-Channel (both same direction) Isolator, 1 kV, MSOP
The IL711S-1 is a 3.3/5V dual-channel unidirectional 150 Mbps CMOS-compatible isolated buffer with 10 ns propagation delay, 300 ps pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.
- Part Number:
- IL711S-1E
$6.29
IL711T-1E: 125C 2-Channel (both same direction) Isolator, 1 kV, MSOP
The IL711T-1 is a high temperature, 3.3/5V, dual-channel, unidirectional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL711T-1E
- Quantity in Stock:
- 207
$6.29
IL712S-1E: 150 Mbps 2-Channel (1 each direction) Isolator, 1 kV, MSOP
The IL712S-1 is a 3.3/5V, dual-channel bidirectional 150 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 300 ps pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.
- Part Number:
- IL712S-1E
- Quantity in Stock:
- 8
$6.29
IL712T-1E: 125C 2-Channel (1 each direction) Isolator, 1 kV, MSOP
The IL712T-1 is a high temperature, 3.3/5V dual-channel, bi-directional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.
- Part Number:
- IL712T-1E
$6.29
IL611CMTI-1E: 2-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP
IL6xxCMTI-Series isolators are
optimized for driving MOSFETs either directly or with an
external gate driver.
Resistors set the input current, and five milliamps guarantees
switching. The inputs can be configured as non-inverting or
inverting.
CMTI-grade isolators are 100% tested to ensure each part has
at least 200 kV/µs minimum Common-Mode Transient
Immunity. Simple external deglitch circuitry can extend the
CMTI to an extraordinary 350 kV/µs typical.
The parts also have an extended supply range of up to 6.6 volts
for compatibility to directly drive a range of power
MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.
The IL611CMTI-1E is a two-channel version in an ultramniature MSOP8 package.
- Part Number:
- IL611CMTI-1E
- Quantity in Stock:
- 53
$6.24
IL711-1E: 2-Channel (both same direction) Isolator, 1 kV, MSOP
The IL711-1 is a 3.3/5V dual-channel unidirectional 110 Mbaud CMOS-compatible isolated buffer with 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package.
The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL711-1E
$5.83
