The 12030 is a 0.125 x 0.25 x 0.5 inch miniature ferrite bar magnet. Typical
field strength is 1500 Oe at the magnet face and forty oersteds one-half inch
away.
This magnet is also included in several sensor evaluation kits, including our Analog
Sensor Evaluation Kit and Sensor
Demo Board.
$3.25
The 12031 is a 0.312" dia. x 0.125" thick Y25 ferrite disk magnet. Typical field strength is 900 Oe at the magnet face. This magnet is also included in our Analog Sensor Evaluation Kit.
$0.99
The 12032 is a 1.0" long x 0.125" wide x 0.39" thick Y25 ferrite bar magnet. Typical field strength is 1800 Oe at the magnet face. This magnet is also included in the AG910-07 and AG911-07 GMR Switch Evaluation Kits.
$4.25
The 12216 magnet is a round, Y25 ferrite, 6 mm dia. x 4 mm thick disk magnet. Typical field strength is 1100 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.
$0.99
The 12217 magnet is a round, 3.5 mm dia. x 4 mm thick Y25 ferrite disk magnet. Typical field strength is 1700 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.
$0.99
A diametrically-magnetized for use with AAT- and ADT-Series angle sensors. The magnet material is C5/Y25 ferrite or similar.Typical field strength is 1000 Oe at the magnet face.
$2.85
The 12426 is a split-pole Alnico-5 round horseshoe magnet, ideal for use with
AAT-Series angle sensors.
The magnet is 11 mm diameter by 11 mm tall, with a 3.7 mm hole
through the center for a variety of mounting options.
Typical field strength is 1100 Oe at the magnet face and thirty oersteds 12mm away. This magnet's strength allows a large airgap between the magnet and the sensor.
This magnet is included in our angle sensor evaluation kits.
$8.95
A diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.
Can be used with 12546 magnet holders.
$0.99
The 12527 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.
Can be used with 12545 magnet holders.
$1.19
The 12528 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.
Can be used with 12545 magnet holders.
$1.19
A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).
Compatible with
AG93x-Series
and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.
Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.
$70.00
A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).
Compatible with
AG93x-Series
and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.
Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.
$70.00
This magnetic scale tape is designed to be used with AET050F-00E 0.5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
$30.00
This magnetic scale tape is designed to be used with AET100F-00E 1 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
$30.00
This magnetic scale tape is designed to be used with AET200-00E 2 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
$30.00
This magnetic scale tape is designed to be used with AET500-00E 5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
$30.00
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA002-02E 0.15 to 1.05 mT GMR analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.
$19.95
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA003-02E 2 mT saturation GMR analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.
$19.95
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-00E 5 mT saturation GMR analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.
$19.95
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-02E 5 mT saturation GMR analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.
$19.95