This Evaluation Board is a complete isolated RS-485 / RS-422 node using the IL4622E isolated transceiver with integrated isolated DC-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4622E is a high-speed, fully-isolated, full duplex differential bus transceiver with an integrated
3.3-to-3.3 volt DC-DC convertor to provide a fully-isolated 3.3 volt bus supply using the controller supply. This level of integration dramatically reduces chip count and board area.
This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.
This Evaluation Board is a complete isolated RS-485 node using the IL4822E isolated transceiver with integrated DC-to-DC convertor.
These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.
The IL4822E is a high-speed, fully-isolated, full-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 5 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.
The RS-485 QSOP Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the world's isolated transceiver, the IL3085-1E. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.
Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.
The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.
The RS-485 Wide-Body Isolator Evaluation Board provides a complete isolated RS-485 node using the popular 0.3" (8 mm) creepage IL3585E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.
Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.
The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.
The RS-485 Narrow-Body Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the unique 0.15"-wide IL3585-3E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.
Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.
The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.
Galvanically-isolated high-speed RS-485 differential bus transceiver with 2500 Vrms isolation, 2 kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package.
The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations.
Galvanically-isolated full-duplex RS 422 interface in a 0.3"-wide 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity.
This part is lead (Pb) free.
Lead-free
product information
Galvanically-isolated high-speed RS 485 differential bus transceiver with 2500 Vrms isolation, 2kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package.
The "E" suffix indicates this part is lead (Pb) free.
The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations.
The "E" suffix indicates this part is lead (Pb) free.
The IL3685-1 is the industry's fastest isolated RS-485 transceiver (40 Mbps) in the industry's smallest package (QSOP16). 3.3 V or 5 V input logic; fully PROFIBUS compliant; 15 kV bus ESD protection; 50 kV per microsecond transient immunity.
This part is lead (Pb) free.
The IL3522VE is a 6 kVrms isolated, high-speed differential bus transceiver, designed for bidirectional data communications on balanced transmission lines. The IL3522 offers an exceptional 2.3 V differential output into a 54 ohm load, over the supply range of 4.5 V to 5.5 V. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
This part is lead (Pb) free.
Lead-free
product information
The IL3585VE is a 6 kVrms isolated 40 Mbps RS-485 transceiver and is compatible with 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
This part is lead (Pb) free.
Lead-free
product information
The IL3685 is an isolated 40 Mbps RS-485 transceiver with an extended temperature range. Over-temperature protection; fully PROFIBUS compliant; 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.