New Products

Displaying 1 to 408 (of 408 products)
ADL922-14E: 4 mT, 3V Nanopower GMR Switch, DFN4

NVE's ADL922-14E Ultraminiature Nanopower Switch integrates GMR sensor elements with onboard digital signal processing. Continuous operation allows high frequency switching. External duty cycling allows nanopower operation. The part is packaged in a 1.1 x 1.1 x 0.35 mm DFN4 package. Features: Precise 4 mT operate point Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm DFN4 package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 100 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Wearables and IoT Sensors Battery-Powered Devices Industrial Sensors

Part Number:
ADL922-14E
Quantity in Stock:
2960

$5.63

IL715V-01: 4-Ch (all same dir) Wide-Body 7 kV Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.

Part Number:
IL715V-01
Quantity in Stock:
50

$49.95

IL7614V-01: Isolated 3-Ch SPI w/Integ DC-DC Conv Eval Board

This Evaluation Board provides a complete isolated three-channel SPI node, plus an isolated 3.3 V to 3.3 V DC-to-DC convertor using an IL7614VE. It is ideal for half-duplex SPI applications.

These 2 x 3.5-inch (50 x 90 mm) boards also include screw terminal and test pads, and uses a 2s2p board with vias for optimal thermal performance. LEDs indicate DC-to-DC convertor input and output power.

The IL7614V is a high-speed, fully-isolated, data couplers with an integrated, one-quarter watt 3.3 V-to-3.3 V DC-to-DC convertor. This level of integration dramatically reduces chip count and board area.

Part Number:
IL7614V-01
Quantity in Stock:
1

$84.95

ILDC13V-15E: Isolated 1/4W 3.3-to-6V DC-DC Conv, 2.5 kV, DFN6

The ILDC13V-15E is a one-quarter watt fully-regulated 3.3V-to-6V DC-DC boost convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The "V" suffix indicates an extended creepage package and full 2.5 kV isolation.

The part can be used to power high-side gate supplies in H-bridges.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide virtually unlimited barrier life.

Part Number:
ILDC13V-15E
Quantity in Stock:
47

$5.43

ILDC12V-15E: Isolated 1/4W 3.3-to-5V DC-DC Conv, 2.5kV

The ILDC12-15E is a one-quarter watt fully-regulated 3.3V-to-5V DC-DC boost convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The "V" suffix indicates an extended creepage package and full 2.5 kV isolation.

The part can be used to generate isolated RS-485 bus supplies or to power high-side gate supplies in H-bridges.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide virtually unlimited barrier life.

Part Number:
ILDC12V-15E
Quantity in Stock:
404

$5.43

IL717V-01: 4-Ch (3/1 dir) Wide-Body 7 kV Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL717VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.

Part Number:
IL717V-01
Quantity in Stock:
50

$49.95

IL716V-01: 4-Ch (2 ea dir) Wide-Body 7 kV Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.

Part Number:
IL716V-01
Quantity in Stock:
50

$49.95

ILDC11V-15E: 1/4W 3.3-to-3.3V DC-DC Conv, 2.5 kV, DFN6

The ILDC11V-15E is an ultraminiature, one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The "V" suffix indicates an extended creepage package and full 2.5 kV isolation.

The part can be used to generate isolated RS-485 bus supplies or isolated analog supplies for ADC and DAC circuits.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide virtually unlimited barrier life.

Part Number:
ILDC11V-15E
Quantity in Stock:
1151

$5.98

ADK991-14E: 350 mT, 3V Nanopower TMR Switch, ULLGA

The ADK991-14E Nanopower Switch integrates TMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 350 mT Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: MRI Detection Battery-Powered Devices Portable Instruments Wearables

Part Number:
ADK991-14E
Quantity in Stock:
50

$17.05

IL4822-01: Isolated RS-485 Xcvr w/5V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4822E isolated transceiver with integrated DC-to-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4822E is a high-speed, fully-isolated, full-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 5 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4822-01
Quantity in Stock:
50

$84.95

IL4685-01: Isolated RS-485 Xcvr w/3 V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4685-01
Quantity in Stock:
100

$84.95

IL710S-1-01: 150 Mbps 1-Ch MSOP Isolator Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards have an IL710S-1E 150 Mbps single-channel (all the same direction) ultraminiature MSOP8 isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest isolators.

Part Number:
IL710S-1-01
Quantity in Stock:
50

$49.95

IL716-01: 4-Ch  (2 ea dir) Wide-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716E four-channel (two each direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL716-01
Quantity in Stock:
50

$49.95

IL715-01: 4-Ch  (all same dir) Wide-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715E four-channel (all the same direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL715-01
Quantity in Stock:
50

$49.95

IL717-1-01: 4-Ch (3-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL717-1E ultraminiature four-channel (three transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL717-1-01
Quantity in Stock:
50

$49.95

IL716-1-01: 4-Ch (2 ea dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL716-1E four channel (two each direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's smallest high-performance isolators.

Part Number:
IL716-1-01
Quantity in Stock:
50

$49.95

IL261-1-01: 5-Ch (4-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL261-1E ultraminiature five-channel (four transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL261-1-01
Quantity in Stock:
50

$49.95

IL260-1-01: 5-Ch (all same dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL260-1E ultraminiature five-channel (all the same direction) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL260-1-01
Quantity in Stock:
50

$49.95

IL611-3-01: IL611-3E 2-Ch (both same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL611-3E two-channel (both the same direction) SOIC8 passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL611-3-01
Quantity in Stock:
50

$49.95

IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow

These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL614-3-01
Quantity in Stock:
50

$49.95

IL613-01: IL613E 3-Ch (all same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL613E three-channel (all the same direction) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL613-01
Quantity in Stock:
50

$49.95

IL715-3-01: 4-Ch  (all same dir) Narrow-Body Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-3E four-channel (all the same direction) narrow-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL715-3-01
Quantity in Stock:
50

$49.95

IL610A-1-01: IL610A Passive-In Isolator Eval Board

The 2 x 3.5-inch (50 x 90 mm) boards contains the unique IL610A-1E passive-input, open-drain isolator. A pushbutton and LED demonstrate the remarkable flexibility of this devices. The evaluation board also has an input resistor, input capacitor, power-supply bypass capacitor as recommended, as well as screw connections, test points, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density. The MSOP package is the world's smallest isolator.

The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL610A-1-01
Quantity in Stock:
4

$49.95

IL3685T-01: 40Mbps, 125C Isolated Xcvr Eval Bd, Wide SOIC

These 2 x 3.5-inch (50 x 90 mm) boards include an IL3685TE isolated RS-485 transceiver, a termination resistors, power-supply bypass capacitors as recommended, screw connections, provisions for header pins, and a DB9 bus connector for PROFIBUS.

The IL3685TE is the world's fastest isolated transceiver with data rates to 40 Mbps, is fully PROFIBUS compatible, including the stringent bus differential specifications, and is rated to a full 125C.

Part Number:
IL3685T-01
Quantity in Stock:
50

$49.95

IL715-1-01: 4-Ch (all same dir) QSOP Isolator Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-1E four-channel (all the same direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL715-1-01
Quantity in Stock:
50

$49.95

ALT021-10E-EVB02: 0-0.25 mT TMR eval board w/amplifier

A 0.5 x 0.3 inch (13 x 8 mm) evaluation board with the ALT021-10E ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a sensor and a 5x amplifier to provide a 2.5 V/V/mT output.

The board can be powered by a 0.9 to 7 V power supply or battery and provides a linear, single-ended output.

Part Number:
ALT021-10E-EVB02
Quantity in Stock:
47

$49.95

ALT025-14E-EVB01: 0-10 mT DFN4 TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT025-14E-EVB01
Quantity in Stock:
4

$19.95

ALT025-10E-EVB01: 0-10 mT DFN6 TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT025-10E-EVB01
Quantity in Stock:
19

$19.95

ALT023-10E-EVB01: 0-1 mT TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT023-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT023-10E-EVB01
Quantity in Stock:
61

$19.95

ALT021-10E-EVB01: 0-0.25 mT TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT021-10E ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT021-10E-EVB01
Quantity in Stock:
41

$19.95

ADL125-14E: 1 mT, 3V, 30 Hz Duty-Cycled GMR Switch, DFN4

NVE's ADL125-14E Ultrasensitive Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultrasensitive 1 mT operate point Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm DFN4 package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL125-14E
Quantity in Stock:
1500

$5.63

ADL925-14E: 1 mT, 3V Nanopower GMR Switch, DFN4

NVE's ADL925-14E Ultrasensitive Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: Ultrasensitive 1 mT operate point Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm DFN4 package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL925-14E
Quantity in Stock:
7627

$5.63

IL3685TE: 40 Mbps Isolated RS485 Transceiver, 125C, 2.5kV, Wide SOIC

The IL3685 is an isolated 40 Mbps RS-485 transceiver with an extended temperature range. Over-temperature protection; fully PROFIBUS compliant; 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL3685TE
Quantity in Stock:
698

$6.07

IL3085TE: 4 Mbps Isolated RS485 Transceiver, 125C, 2.5kV, Wide SOIC

The IL3085TE is an isolated 4 Mbps RS-485 transceiver with an extended temperature range. Compatible with 3.3 V or 5 V input logic. 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL3085TE
Quantity in Stock:
85

$5.56

SHIELD01-01: 40V/50A H-Bridge Arduino Shield Eval Board

This Arduino Shield board implements an H-bridge power converter using four power MOSFETs, four IL610CMTI-1E ultrahigh CMTI isolated MOSFET drivers, and two ILDC13-15E ultraminiature isolated DC-to-DC convertors.

The board is rated for 40 volts and 50 amps, to control up to two-kilowatt loads.

Example programs are available via our GitHub Repository.

Key features of the board are:
  • A Simple three-wire Arduino interface (PWM, Dir, and Enable)
  • Heat-sinking and thermal vias
  • Standard Arduino Shield form factor outline
  • Easy connections with large screw terminals

Specifications:
  • Max. load: 2 kW (40 V / 50 A)
  • Load supply line: 8 to 40 V
  • Arduino input supply: 5V or 7 V to 20 V, 500 mA max.
  • Logic-to-load isolation: 2.5 kV per UL 1577
  • Operating Temperature Range: -40 °C to 85 °C
  • Dimensions: 2.1 in. by 2.7 in. (53.4 mm by 68.6 mm)

Applications:
  • Motor speed and direction control
  • Robotics
  • DC-to-AC invertors

Part Number:
SHIELD01-01
Quantity in Stock:
25

$195.95

IL7817V-01: Isolated 4-Ch SPI w/Integ DC-DC Conv Eval Board

This Evaluation Board provides a complete isolated four-channel SPI node, plus an isolated 3.3 V to 5 V DC-to-DC convertor using an IL7817VE.

The board provides screw terminals for connections, plus test points for checking voltages and I/O. There are also LEDs to indicate DC-to-DC convertor input and output power. It uses a 2s2p board with thermal vias for optimal thermal performance.

The IL7817V is a high-speed, fully-isolated, data couplers with an integrated, one-quarter watt 3.3 V to 5 V DC-to-DC boost convertor. This level of integration dramatically reduces chip count and board area.

Part Number:
IL7817V-01
Quantity in Stock:
1

$84.95

ILDC13V-01: Miniature Isolated 3.3-to-6V DC-DC Conv Eval Bd

This Evaluation Board uses the 3.3-to-6 V version of our miniature DC-to-DC convertor, the ILDC13VE.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC13VE plus the three required external bypass capacitors as well as LEDs to show the DC-to-DC convertor is operating. Screw terminals provide easy connections.

The ILDC13VE is an miniature one-quarter watt DC-to-DC boost convertor with 4 kV isolation that can be used to generate an isolated six-volt gate supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC13V-01

$49.95

ILDC12V-01: Miniature Isolated 3.3-to-5V DC-DC Conv Eval Bd

This Evaluation Board uses the 3.3-to-5 V version of our miniature DC-to-DC convertor, the ILDC12VE.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC12VE plus the three required external bypass capacitors as well as LEDs to show the DC-to-DC convertor is operating. Screw terminals provide easy connections.

The ILDC12 is an ultraminiature one-quarter watt DC-to-DC boost convertor with 4 kV isolation that can be used to generate an isolated five-volt bus supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC12V-01

$49.95

ILDC11V-01: Miniature Isolated 3.3-to-3.3V DC-DC Conv Eval Bd

This Evaluation Board uses the 3.3-to-3.3V version of our miniature DC-DC convertor, the ILDC11VE.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC11-15E plus the three required external bypass capacitors as well as LEDs to show the DC-to-DC convertor is operating. Screw terminals provide easy connections.

The ILDC11VE is a miniature one-quarter watt DC-to-DC convertor with 4 kV isolation that can generate an isolated 3.3-volt bus supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC11V-01

$49.95

ILDC13-01: Ultraminiature Isolated 3.3-to-6V DC-DC Conv Eval Bd

This Evaluation Board uses the 3.3-to-6 V version of the world’s smallest isolated DC-to-DC convertor, the ILDC13-15E.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC13-15E plus the three required external bypass capacitors as well as LEDs to show the DC-to-DC convertor is operating. Screw terminals provide easy connections.

The ILDC13-15E is an ultraminiature one-quarter watt DC-to-DC boost convertor with 2.5 kV isolation that can be used to generate an isolated six-volt gate supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC13-01

$49.95

ILDC12-01: Ultraminiature Isolated 3.3-to-5V DC-DC Conv Eval Bd

This Evaluation Board uses the 3.3-to-5 V version of world’s smallest isolated DC-to-DC convertor, the ILDC12-15E.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC12-15E plus the three required external bypass capacitors as well as LEDs to show the DC-to-DC convertor is operating. Screw terminals provide easy connections.

The ILDC12 is an ultraminiature one-quarter watt DC-to-DC boost convertor with 2.5 kV isolation that can be used to generate an isolated five-volt bus supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC12-01

$49.95

ALT021-10E: 0-0.25 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT021 is an ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: ±0.25 mT linear range Ultrahigh sensitivity (500 mV/V/mT typical) Large output signal (200 mV/V/mT typical) 0 - 10 V power supply Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power Up to 300 kHz frequency bandwidth 2.5 x 2.5 mm TDFN6 package –40 to 125°C Applications: Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics
Navigation

Part Number:
ALT021-10E
Quantity in Stock:
9497

$12.00

ADT005-10E: High Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT005-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.

The ADT005 is higher hysteresis than the ADT002 for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction.

To minimize power, the ADT005 does not include the high-field detection circuitry included in the ADT001 version, and is slightly less accurate due to lower-power circuitry.

The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.

The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT005-10E
Quantity in Stock:
135200

$11.18

AG957-06E: Bare breakout board for ASR0xx Smart Angle Sensors

The AG957-06E provides easy connections to an ASR-Series Smart Angle Sensor (sensors sold separately). In addition a spot for the sensor, the board has a spot for a bypass capacitor and a header to connected to the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG957-06E
Quantity in Stock:
11

$2.25

IL7816VE: 4-channel (2 each direction) Isolator w/3.3-5V DC-DC Convertor

The IL7816VE is a four-channel (two each direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7816VE
Quantity in Stock:
22

$12.40

IL7817VE: 4-channel (3 transmit, 1 receive) Isolator w/3.3-5V DC-DC Convertor

The IL7817VE is a four-channel (3 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7817VE
Quantity in Stock:
1

$12.40

IL7815VE: 4-channel (all same direction) Isolator w/3.3-5V DC-DC Convertor

The IL7815VE is a four-channel (all the same direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7815VE
Quantity in Stock:
9

$12.40

IL7814VE: 3-channel (both same direction) Isolator w/3.3-5V DC-DC Convertor

The IL7814VE is a three-channel (2 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7814VE
Quantity in Stock:
16

$11.78

IL7812VE: Two-channel (one each direction) Isolator w/3.3-5V DC-DC Convertor

The IL7812VE is a two-channel (one each direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7812VE
Quantity in Stock:
18

$11.16

IL7811VE: Two-channel (both same direction) Isolator w/3.3-5V DC-DC Convertor

The IL7811VE is a two-channel (both the same direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7811VE

$11.16

ILDC12VE: 4 kV Isolation 1/4W 3.3-to-5V DC-DC Conv Wide SOIC

The ILDC13VE is a miniature, one-quarter watt fully-regulated 3.3V-to-5V DC-DC boost convertor. The part can be used to generate isolated RS-485 bus supplies, or power high-side gate supplies in H-bridges.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide best-in-class 4 kV isolation and virtually unlimited barrier life.

The unique True-8(TM) package provides true eight-millimeter creepage in accordance with IEC60601. Maximum 5 mV peak-to-peak ripple means low noise.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC12VE
Quantity in Stock:
3

$5.98

ILDC12-15E: Isolated 1/4W 3.3-to-5V DC-DC Conv, 1kV, DFN6

The ILDC12-15E is a one-quarter watt fully-regulated 3.3V-to-5V DC-DC boost convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The part can be used to generate isolated RS-485 bus supplies, or power high-side gate supplies in H-bridges.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide 1 kV isolation and virtually unlimited barrier life.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC12-15E

$5.43

ILDC13VE: 4 kV Isolation 1/4W 3.3-to-6V DC-DC Conv Wide SOIC

The ILDC13VE is a miniature, one-quarter watt fully-regulated 3.3V-to-6V DC-DC boost convertor. The part can be used to generate isolated high-side gate supplies for H-bridges.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide best-in-class 4 kV isolation and virtually unlimited barrier life.

The unique True-8(TM) package provides true eight-millimeter creepage in accordance with IEC60601. Maximum 5 mV peak-to-peak ripple means low noise.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC13VE

$5.98

ILDC13-15E: Isolated 1/4W 3.3-to-6V DC-DC Conv, 1 kV, DFN6

The ILDC13-15E is a one-quarter watt fully-regulated 3.3V-to-6V DC-DC boost convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The part can be used to generate isolated high-side gate supplies for H-bridges.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide 1 kV isolation and virtually unlimited barrier life.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC13-15E

$5.43

AG976-07E: ASR003-10E Smart SPI Angle Sensor Evaluation Kit

The AG976 demonstration board includes an ASR003-10E sensor, a diametrical magnet, magnet fixturing, and an interface board with a microcontroller. Four variable-brightness LEDs show the magnetic field strength in each direction.

Easy-to-install Windows software provides a graphical user interface showing the sensor output and allowing sensor parameters to be programmed.

Part Number:
AG976-07E

$195.00

AG977-07E: ASR003 Smart TMR Angle Sensor breakout board

The AG977-07E provides easy connections to an ASR003-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG977-07E
Quantity in Stock:
4

$19.95

AG973-07E: SM223-10E Smart I²C TMR Magnetometer Evaluation Kit

The AG973-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM223-10E I2C Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM228-10E sensor.
          - a microcontroller connected to the sensor via I2C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • An LED indicating the state of the threshold output.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG973-07E
Quantity in Stock:
7

$95.00

AG975-07E: SM223 1.5 mT I2C Smart TMR Magnetometer Breakout Board

The AG975-07E provides easy connections to an SM223-10E high-sensitivity Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG975-07E

$19.95

AG974-07E: ACT001-10E Isolated Current Sensor Evaluation Board

This 2” x 2” square evaluation board allows you to test the remarkable ACT001-10E current sensor and a common application circuit.

The ACT001-10E is a fully-isolated, inline current sensor with an on-chip current strap. A Wheatstone bridge manufactured with NVE’s state-of-the-art tunneling magnetoresistance (TMR) sensor elements detects the magnetic field from the input current across NVE’s unique polymer isolation barrier.

Part Number:
AG974-07E
Quantity in Stock:
19

$50.00

AAH002-02E PCBA: Ultrahigh Sensitivity Analog Sensor Assembly

A preassembled circuit board with a high-sensitivity AAH002-02E sensor and a differential amplifier circuit with a gain of 25. The board can be powered by a 2.7 to 12 V supply and provides a single-ended output with a typical sensitivity of 3.75 V/V/mT (375 mV/V/Oe).The circuit board is 12.5 x 7.8 mm, with Vcc, GND, and OUT plated-through holes for wires or a header.

Part Number:
AAH002-02E PCBA
Quantity in Stock:
27

$150.00

IL810T-3E: Single Channel Top-of-the-Line Isolator, 2.5 kV, SOIC8

The IL810T-3E is NVE's top-of-the-line single-channel isolator, with best-in-class specifications:
• 125 °C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part is an 8-pin SOIC RoHS package.

Part Number:
IL810T-3E
Quantity in Stock:
1315

$3.93

SM223-10E: High-Speed Smart TMR Magnetometer, 1.5mT, I2C, TDFN6

The SM223-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface, and allows setting a versatile digital threshold output.

Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for optimal current sensing and easy mechanical interfaces. Key features include:
  •  0 to 1.5 mT linear range
  •  Can detect magnets more than 150 mm away
  •  Simple I2C interface
  •  Programmable digital threshold output
  •  2% of full-scale accuracy for 0 to 125°C
  •  Fast 10000 sample-per-second update rate
  •  Factory calibrated
  •  Programmable offset and gain compensation
  •  -40°C to +125°C operating range
  •  Ultraminiature 2.5 x 2.5 mm DFN6 package

Part Number:
SM223-10E
Quantity in Stock:
6

$6.88

IL860-1E: 5-Channel (all same direction) Top-of-the-Line Isolator, 2.5 kV, QSOP

The IL860-1E is NVE's top-of-the-line five-channel isolator, with best-in-class specifications:
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• 125 °C max. operating temperature
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's 16-pin QSOP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL860-1E
Quantity in Stock:
493

$9.40

IL4822E: Isolated RS422 Transceiver w/3.3-5V DC-DC Convertor, 2.5 kV, Wide SOIC

The IL4822 is an isolated, full-duplex 40 Mbps 5-volt bus RS-422 / RS-485 transceiver with an integrated 3.3V-to-5V DC-DC convertor.

The transceiver runs up to 40 Mbps, has a 1/5 Unit Load.

The DC-DC convertor can output up to 50 mA and is fully regulated.

2500 VRMS isolation; 16.5 kV bus ESD protection; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL4822E
Quantity in Stock:
806

$9.32

ABL005-10E: 0.5 mm, 1-Bridge Analog Gear-Tooth Sensor, TDFN

NVE's ABL005-10E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.5 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center to center distance between sensor elements is 0.500 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL005-10E
Quantity in Stock:
1724

$5.19

ABT600-00E: TMR 2.4 mm Pitch Gear Tooth Sensor, MSOP

ABT600-00E gear-tooth sensors are typically used with back-biasing magnets to encode the position of a ferrous gear.

The ABT600-00E is optimized for 2.4 mm pitch gears, and can be used for pitches from 1.6 to 4.8 mm. The sensors have two channels to detect direction.

Key features include:
   • 0.001° resolution
   • Large analog peak-to-peak signals
   • Operating frequency to 350 kHz
   • 150 °C operating temperature

Part Number:
ABT600-00E

$5.71

ABT500-00E: TMR 2 mm Pitch Gear Tooth Sensor, MSOP

ABT500-00E gear-tooth sensors are typically used with back-biasing magnets to encode the position of a ferrous gear.

The ABT500-00E is optimized for 2 mm pitch gears, and can be used for pitches from 1.3 to 4 mm. The sensors have two channels to detect direction.

Key features include:
   • 0.001° resolution
   • Large analog peak-to-peak signals
   • Operating frequency to 350 kHz
   • 150 °C operating temperature

Part Number:
ABT500-00E

$5.71

AG972-07E: ABT375 TMR Gear-Tooth Sensor Demo Kit

The AG972-07E Demonstration Board showcases rotational encoding to a few thousandths of a degree with an ABT375-00E sensor and a 30-tooth gear.

The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB
  • An ABT375-00E gear tooth sensor
  • An eight-digit rotational display
  • a 30-tooth. 0.5 module gear
  • Part #12216 ceramic bias magnet
  • Test points for analog outputs
  • Powered by two AAA batteries (included)

Part Number:
AG972-07E
Quantity in Stock:
1

$195.00

ABT375-00E: TMR 1.5 mm Pitch Gear Tooth Sensor, MSOP

ABT375-00E gear-tooth sensors are typically used with back-biasing magnets to encode the position of a ferrous gear.

The ABT375-00E is optimized for 1.5 mm pitch gears, and can be used for pitches from 1 to 3 mm. The sensors have two channels to detect direction.

Key features include:
   • 0.001° resolution
   • Large analog peak-to-peak signals
   • Operating frequency to 350 kHz
   • 150 °C operating temperature

A demo board is also available.

Part Number:
ABT375-00E

$5.71

ABT250-00E: TMR 1 mm Pitch Gear Tooth Sensor, MSOP

ABT250-00E gear-tooth sensors are typically used with back-biasing magnets to encode the position of a ferrous gear.

The ABT250-00E is optimized for 1 mm pitch gears, and can be used for pitches from 0.6 to 2 mm. The sensors have two channels to detect direction.

Key features include:
   • 0.001° resolution
   • Large analog peak-to-peak signals
   • Operating frequency to 350 kHz
   • 150 °C operating temperature

Part Number:
ABT250-00E

$5.71

AHL023-14E: 6 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL023-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL023-14E
Quantity in Stock:
47801

$7.60

ALT025-14E: 0-10 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, DFN4

The ALT025-14E is an ultraminiature Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with an extraordinary amount of signal. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: Tunneling Magnetoresistive Technology (TMR) Large signals (20 mV/V/mT typical) Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power ±10 mT linear range 1.1 x 1.1 mm DFN4 package –40 to 125°C Applications: Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics

Part Number:
ALT025-14E
Quantity in Stock:
2894

$12.00

IL7616VE: 4-channel (2 each direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7616VE is a four-channel (two each direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7616VE
Quantity in Stock:
57

$12.40

IL7615VE: 4-channel (all same direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7615VE is a four-channel (all the same direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7615VE
Quantity in Stock:
96

$12.40

IL7614VE: 3-channel (both same direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7614VE is a three-channel (2 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7614VE
Quantity in Stock:
3013

$11.78

IL7611VE: Two-channel (both same direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7611VE is a two-channel (both the same direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7611VE
Quantity in Stock:
45

$11.16

IL7617VE: 4-channel (3 transmit, 1 receive) Isolator w/3.3-3.3V DC-DC Convertor

The IL7617VE is a four-channel (3 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7617VE
Quantity in Stock:
225

$12.40

IL7612VE: Two-channel (one each direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7612VE is a two-channel (one each direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7612VE
Quantity in Stock:
66

$11.16

ILDC11VE: 4 kV Isolation 1/4W 3.3-to-3.3V DC-DC Conv Wide SOIC

The ILDC11VE is a miniature, one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor. The part can be used to generate an isolated 3.3-volt bus supply from a controller supply.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide best-in-class 4 kV isolation and virtually unlimited barrier life.

The unique True-8(TM) package provides true eight-millimeter creepage in accordance with IEC60601. Maximum 5 mV peak-to-peak ripple means low noise.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC11VE
Quantity in Stock:
596

$5.98

12592: 5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET500-00E 5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12592
Quantity in Stock:
5

$30.00

12591: 2 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET200-00E 2 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12591

$30.00

12590: 1 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET100F-00E 1 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12590
Quantity in Stock:
2

$30.00

12589: 0.5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET050F-00E 0.5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12589
Quantity in Stock:
3

$30.00

AG970-07E: AET-Series TMR Linear Sensor Eval Kit

The AG970-07E Evaluation Kit helps test a variety AET-Series sensors with linear magnetic scales. The kit includes:   • All five AET-Series parts (unsoldered in tubes)
  • A 3 x 4-inch (76 x 101 mm) PCB with test points and screw terminals
  • Detachable fixturing for linear magnetic tape (tape sold separately)

Part Number:
AG970-07E

$65.00

AG965-07E: AET500-02E TMR Linear Sensor Demo Kit

The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor. The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB   • An AET500-02E 5 mm pole-pitch sensor
  • A four digit position display
  • Part #12592 5mm pole pitch magnetic tape
  • 3-D printed fixturing
  • LEDs for pole detected
  • Powered by three AAA batteries (included)

Part Number:
AG965-07E
Quantity in Stock:
20

$195.00

AET500-02E: 5 mm, Half-Bridge TMR Rotational / Linear Sensor, SOIC

AET500-02E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The half-bridge configuration maximizes noise immunity and provides large 300 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET500-02E
Quantity in Stock:
1751

$5.71

AET120F-00E: 1.2 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP

AET120F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET120F-00E

$5.71

AET100F-00E: 1 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP

AET100F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET100F-00E
Quantity in Stock:
14

$5.71

AET075F-00E: 0.75 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP

AET075F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET075F-00E

$5.71

AET050F-00E: 0.5 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP

AET050F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET050F-00E

$5.71

AG968-07E: SM228 15 mT I2C Smart TMR Magnetometer Breakout Board

The AG968-07E provides easy connections to an SM228-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG968-07E
Quantity in Stock:
1

$19.95

AG969-07E: SM228-10E Smart I²C TMR Magnetometer Evaluation Kit

The AG969-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM228-10E I2C Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM228-10E sensor.
          - a microcontroller connected to the sensor via I2C.
          - a bus-bar for evaluating as a current sensor.
    • An LED indicating the state of the threshold output.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG969-07E
Quantity in Stock:
4

$95.00

SM228-10E: Smart TMR Magnetometer, 15 mT, I2C, TDFN6

The SM228-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface.

Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for optimal current sensing and easy mechanical interfaces. Key features include:
  •  0 to 150 Oe / 0 to 15 mT linear range
  •  Can detect magnets more than 50 mm away
  •  I2C interface
  •  Programmable digital threshold output
  •  2% of full-scale accuracy for 0 to 125°C
  •  Fast 10000 sample-per-second update rate
  •  Factory calibrated
  •  Programmable offset and gain compensation
  •  -40°C to +125°C operating range
  •  Ultraminiature 2.5 x 2.5 mm DFN6 package

Part Number:
SM228-10E
Quantity in Stock:
175

$6.88

AKT001-14E: 1.5 T Sat. Ultrahigh-Field TMR Magnetometer, 1 MOhm, DFN4

The AKT001-14E is an ultrahigh-field magnetometer sensor that provides precise sensing of magnetic fields up to 1.5 T (15 kOe). NVE’s unique Tunneling Magnetoresistive (TMR) technology provides unmatched field range, low power, and small size. Features: Tunneling Magnetoresistance (TMR) technology 1.5 T saturation 0.05 to 1 T linear range High resistance for battery powered applications Sensitive to fields of any direction in the IC plane Ratiometric Wheatstone bridge outputs Wide supply voltage range (

Part Number:
AKT001-14E
Quantity in Stock:
177

$17.05

AG967-07E: ASR022 ABZ Smart TMR Encoder Sensor breakout board

The AG967-07E provides easy connections to an ASR022-10E ABZ TMR Encoder Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG967-07E
Quantity in Stock:
14

$19.95

AG966-07E: ASR012 I2C/PWM Smart TMR Angle Sensor breakout board

The AG966-07E provides easy connections to an ASR012-10E I2C/PWM TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG966-07E
Quantity in Stock:
2

$19.95

AG964-07E: ASR022-10E ABZ TMR Encoder Sensor Demo Kit

The AG964-07E Demonstation Board has everything you need to evaluate the remarkable ASR022-10E ABZ TMR Encoder Sensor. The demonstration includes:
    • ASR022-10E ABZ Noncontact TMR Encoder Sensor
    • A four-digit display to indicate rotation
    • Part # 12426 split-pole Alnico 5 round horseshoe magnet
    • LEDs for A, B, Z, and Direction outputs
    • Plastic magnet locating fixture
    • Powered by two AAA batteries (included)

Part Number:
AG964-07E
Quantity in Stock:
2

$195.00

IL4622E: Isolated RS422 Transceiver w/3.3-3.3V DC-DC Convertor, 2.5 kV, Wide SOIC

The IL4622 is an isolated, full-duplex 40 Mbps 3.3-volt bus RS-422 / RS-485 transceiver with an integrated 3.3V-to-3.3V DC-DC convertor.

The transceiver runs up to 40 Mbps, has a 1/5 Unit Load.

The DC-DC convertor can output up to 80 mA and is fully regulated.

2500 VRMS isolation; 16.5 kV bus ESD protection; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL4622E
Quantity in Stock:
4873

$9.32

ASR022-10E: ABZ Noncontact TMR Encoder Sensor, TDFN6

ASR022 noncontact TMR encoder sensors provide precise pulses indicating angular motion, and is more accurate and smaller than other non-contact encoders.

An ABZ interface allows the ASR022 to replace legacy optical encoders.

The sensor combines precise, low-power Tunneling Magnetoresistance (TMR) sensing elements with sophisticated digital signal processing.

The sensor is factory calibrated, with coefficients stored in internal memory.

The ASR022 is designed for harsh industrial or automotive environments with ESD protection, and full −40 °C to 125 °C operating temperature range.

Part Number:
ASR022-10E
Quantity in Stock:
716

$8.98

IL611CMTI-1E: 2-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL611CMTI-1E is a two-channel version in an ultramniature MSOP8 package.

Part Number:
IL611CMTI-1E
Quantity in Stock:
53

$6.24

IL610CMTI-3E: 1-Channel Ultrahigh CMTI Isolator, 2.5 kV, SOIC8

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL610CMTI-3E is a single-channel version in a SOIC8 package.

Part Number:
IL610CMTI-3E
Quantity in Stock:
1400

$3.85

IL610CMTI-1E: 1-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL610CMTI-1E is a single-channel version in an ultraminiature MSOP8 package.

Part Number:
IL610CMTI-1E
Quantity in Stock:
403

$3.85

AG963-07E: ASR012-10E I²C Smart Angle Sensor Evaluation Kit

The AG963-07E Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR012-10E I2C Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR012-10E sensor
          - a diametrical magnet
          - magnet fixturing

    • An interface board with:
          - a microcontroller connected to the sensor via I²C
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG963-07E
Quantity in Stock:
5

$195.00

ASR012-10E: Smart I²C TMR Angle Sensor, TDFN6

ASR012 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR012 provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

An I²C interface provides angle data and allows setting device parameters. A PWM output is also provided

The ASR012 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR012-10E
Quantity in Stock:
149

$8.98

ILDC11-01: Ultraminiature Isolated 3.3-to-3.3V DC-DC Conv Eval Bd

This Evaluation Board uses the 3.3-to-3.3V version of the world’s smallest isolated DC-to-DC convertor, the ILDC11-15E.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC11-15E plus the three required external bypass capacitors as well as LEDs to show the DC-to-DC convertor is operating. Screw terminals provide easy connections.

The ILDC11 is an ultraminiature one-quarter watt DC-to-DC convertor with 2.5 kV isolation that can be used to generate an isolated 3.3-volt bus supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC11-01
Quantity in Stock:
1

$49.95

IL4622-01: Isolated RS-485/RS-422 Xcvr w/DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 / RS-422 node using the IL4622E isolated transceiver with integrated isolated DC-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4622E is a high-speed, fully-isolated, full duplex differential bus transceiver with an integrated 3.3-to-3.3 volt DC-DC convertor to provide a fully-isolated 3.3 volt bus supply using the controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4622-01

$84.95

ILDC11-15E: Ultraminiature Isolated 1/4W 3.3-to-3.3V DC-DC Conv

The ILDC11-15E is a one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The part can be used to generate an isolated 3.3-volt bus supply from a controller supply.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide full 2.5 kV isolation and virtually unlimited barrier life.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC11-15E

$5.44

ADT925-14E: 1.5 mT, 3V Nanopower TMR Switch, ULLGA

NVE's ADT925-14E Nanopower Switch integrates TMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 1.5 mT (15 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Up to 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Wearables

Part Number:
ADT925-14E
Quantity in Stock:
605

$11.18

ADT924-14E: 2.2 mT, 3V Nanopower TMR Switch, ULLGA

NVE's ADT924-14E Nanopower Switch integrates TMR sensor elements with digital signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 2.2 mT (22 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Up to 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Wearables

Part Number:
ADT924-14E

$11.18

IL4685E: Isolated RS485 Transceiver w/DC-DC Convertor, 2.5 kV, Wide SOIC

The IL4685 is an isolated 40 Mbps 3.3-volt bus RS-485 transceiver with an integrated 3.3V-to-3.3V DC-DC convertor.

The transceiver runs up to 40 Mbps, has a 1/5 Unit Load.

The DC-DC convertor can output up to 80 mA and is fully regulated.

2500 VRMS isolation; 16.5 kV bus ESD protection; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL4685E
Quantity in Stock:
2930

$9.32

AHK991-14E: 350 mT, 1.5V, TMR Switch, ULLGA

The unique AHK991-14E is a high-field, low voltage, low power, TMR magnetic switch, designed for MRI detection in implantable medical devices.

The sensors have a 350 mT (3500 Oe) typical operate point, which is high enough to detect MRI fields or strong, rare-earth magnets in close proximity. Such high fields disrupt most other magnetic sensors. The sensors can withstand unlimited fields without being damaged or turning off.

Unlike Hall effect or other sensors, the switch is sensitive to magnetic fields in any direction.

Key Specifications: 350 mT operate point 0.9 to 1.8 V 2 µA typical supply current 3000 Hz switching speed -40 to 85°C

Part Number:
AHK991-14E
Quantity in Stock:
73

$17.05

AG962-07E: SM125-10E Smart GMR Magnetometer Evaluation Kit

The AG962-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM125-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM125-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG962-07E
Quantity in Stock:
4

$95.00

AG961-07E: SM125 Smart GMR Magnetometer breakout board w/connector

The AG961-07E provides easy connections to an SM125-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG961-07E
Quantity in Stock:
22

$24.95

SM125-10E: General-Purpose 4 mT Smart GMR Magnetometer, TDFN6

The SM125-10E Smart Magnetometer combines an omnipolar GMR sensor element with with easy-to-use digital signal processing.

A digital output provides precise, programmable thresholds. An I²C interface provides magnetic field data, as well as a calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.

All commands, data, and coefficients are a single byte, and a slick, elegant data structure lets you get up and running with a minimum of firmware.

Key features include:
  • Can detect magnets more than 50 mm away
  • I²C and digital threshold outputs
  • 0-4 mT linear range
  • 8-bit / 1% output resolution
  • −40°C to +125°C operating range
  • 5% FS accuracy for 0 to 85°C
  • 10 kSps sample rate for fast response
  • 6 mA typical supply current
  • In-plane sensitivity more usable than Hall effect sensors
  • Programmable offset and gain compensation
  • Optional magnet temperature compensation   • 2.2 to 3.6 volt supply
  • Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package

Part Number:
SM125-10E
Quantity in Stock:
2437

$6.88

IL41050TFD-1-01: QSOP Isolated CAN FD Evaluation Board

The isolated CAN FD Evaluation Board provides a complete isolated Controller Area Network node using the world's smallest isolated CAN FD transceiver, the IL41050TFD-1E.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, pull-up resistors, and a jumper to select normal or silent mode.

Part Number:
IL41050TFD-1-01
Quantity in Stock:
11

$49.95

ADT922-14E: 4.5 mT, 3V Nanopower TMR Switch, ULLGA

NVE's ADT922-14E Nanopower Switch integrates TMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 4.5 mT (45 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Up to 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Security Wearables

Part Number:
ADT922-14E
Quantity in Stock:
876

$11.18

AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board

The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040T

$19.95

ADT923-14E: 3.2 mT, 3V Nanopower TMR Switch, ULLGA

NVE's ADT923-14E Nanopower Switch integrates TMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: 3.2 mT (32 Oe) Digital Switch Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V 1 microamp quiescent current at 3 V without duty-cycling Up to 20 kHz switching frequency Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package Applications: Battery-Powered Devices Portable Instruments Wearables

Part Number:
ADT923-14E
Quantity in Stock:
8

$11.18

ALT023-10E: 0-1 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT023 is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with extraordinary sensitivity. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: ±1 mT linear range Large signal (200 mV/V/mT typical) Wheatstone bridge magnetometer configuration 0 - 10 V power supply 20 kiloohm device resistance for low power High linearity output (

Part Number:
ALT023-10E
Quantity in Stock:
344

$12.00

AHT925-14E: 1.5 mT, 1.5V, Nanopower TMR Switch, ULLGA

AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHT925-14E

$8.36

AG960-07E: SM324 Ultraprecise Smart Magnetometer breakout board

The AG960-07E provides easy connections to an SM324-10E Precision TMR Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG960-07E
Quantity in Stock:
6

$19.95

AG959-07E: SM225 High-Speed Smart TMR Magnetometer breakout board

The AG959-07E provides easy connections to an SM225-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG959-07E
Quantity in Stock:
5

$19.95

AG958-07E: SM124 Smart GMR Magnetometer breakout board w/connector

The AG958-07E provides easy connections to an SM124-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG958-07E
Quantity in Stock:
9

$24.95

AG957-07E: ASR002 Smart TMR Angle Sensor breakout board

The AG957-07E provides easy connections to an ASR002-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG957-07E
Quantity in Stock:
2

$19.95

AG953H-07E: SM225-10E Bussbar Current Sensor Demonstration

The AG953H-07 demonstrates high current measurement with the SM225-10E Smart TMR Magnetometer. A 1/4" x 1/2" busbar is mounted to the PCB, and the sensor can detect up to +/-650 amps. Based on the AG953-07E Evaluation Kit, a powerful, intuitive graphical user interface allows the user to control sensor offset, calibration, filtering, and memory.

Part Number:
AG953H-07E
Quantity in Stock:
2

$129.00

AG905-07E: ALT025 High Current PCB Demonstration

This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output.

Part Number:
AG905-07E

$75.00

IL3685PE: 3V-Bus, 1/5 U.L. Isolated RS485 Transceiver, 2.5 kV, Wide SOIC

The IL3685 is an isolated 40 Mbps RS-485 transceiver for 3.3V buses. 1/5 unit load supports up to 160 nodes. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free.

Lead-free product information

Part Number:
IL3685PE
Quantity in Stock:
561

$5.52

ALT025-10E: 0-10 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT025 is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with an extraordinary amount of signal and linear range. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. The ALT025 has cross-axis sensitivity (across the pads). Features: Large signal (200 mV/V) Wheatstone bridge magnetometer configuration 0 - 10 V power supply 20 kiloohm device resistance for low power ±10 mT (±100 Oe) linear range High linearity output (

Part Number:
ALT025-10E

$12.00

AHT924-14E: 2.2 mT, 1.5V, Nanopower TMR Switch, ULLGA

AHT924-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHT924-14E

$8.36

AHT923-14E: 3.2 mT, 1.5V, Nanopower TMR Switch, ULLGA

AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHT923-14E

$8.36

AHT922-14E: 4.5 mT, 1.5V, Nanopower TMR Switch, ULLGA

AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHT922-14E
Quantity in Stock:
1422

$8.36

AHL924-14E: 2.8 mT, 1.5V, Nanopower GMR Switch, ULLGA

NVE's AHL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL924-14E
Quantity in Stock:
50000

$7.60

AHL925-14E: 1 mT, 1.5V, Nanopower GMR Switch, ULLGA

NVE's AHL925-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL925-14E
Quantity in Stock:
20000

$7.60

AHL921-14E: 2 mT, 1.5V, Nanopower GMR Switch, ULLGA

NVE's AHL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL921-14E
Quantity in Stock:
40000

$7.60

AHL025-14E: 1 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL025-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL025-14E
Quantity in Stock:
55000

$7.60

AHL024-14E: 2.8 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL024-14E
Quantity in Stock:
30000

$7.60

AHL021-14E: 2 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL021-14E
Quantity in Stock:
46031

$7.60

IL41050TFD-3E: Isolated CAN FD Transceiver, 125C, 5 Mbps, 2.5 kV, Narrow SOIC

The IL41050TFD-3E is an isolated CAN FD transceiver. 125C; 5 Mbps; 3.3 V or 5.0 V input logic. 16-pin narrow-body (0.15'') RoHS SOIC package.

Part Number:
IL41050TFD-3E

$3.62

IL41050TFD-1E: Isolated CAN FD Transceiver, 125C, 5 Mbps, 2.5 kV, QSOP

The IL41050TFD-1E is an ultraminiature isolated CAN FD transceiver with no performance compromises. 125C; 5 Mbps; 3.3 V or 5.0 V input logic. 16-pin QSOP package--the world's smallest isolated transceiver.

Part Number:
IL41050TFD-1E
Quantity in Stock:
3937

$4.52

IL41050TFDE: Isolated CAN FD Transceiver, 125C, 5 Mbps, 2.5 kV, Wide SOIC

The IL41050TFDE is an isolated CAN FD transceiver. 125C; 5 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TFDE

$3.62

12545: Holder for 8 mm dia. disk magnet

A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12545
Quantity in Stock:
3

$70.00

12546: Holder for 4 mm dia. disk magnet

A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12546
Quantity in Stock:
3

$70.00

AG954-07E: TDFN6 Socket Board

The AG954-07E provides a socket for easy programming and prototyping of TDFN6 devices without soldering and unsoldering.

The custom socket is compatible with NVE's 2.5 mm x 2.5 mm TDFN6 package parts (-10E suffixes).

The board is 1.5" x 2" (38 mm x 50 mm), and uses brass hardware to minimize magnetic interference with the socketed sensor.
A 0.1"-spaced header provides for connections to the sensors, and a row of 0.1"-spaced through-holes allows for auxiliary parts such as a decoupling capacitor or an LED.

Part Number:
AG954-07E

$129.00

12526: 4 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

A diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12546 magnet holders.

Part Number:
12526
Quantity in Stock:
885

$0.99

12528: 8 mm Dia. x 8 mm Thick Diametrically-Magnetized Magnet

The 12528 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12528
Quantity in Stock:
903

$1.19

12527: 8 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

The 12527 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12527
Quantity in Stock:
923

$1.19

AG953-07E: SM225-10E Smart TMR Magnetometer Evaluation Kit

The AG953-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM225-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM225-10E sensor.
          - a microcontroller connected to the sensor via SPI.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG953-07E
Quantity in Stock:
3

$95.00

SM225-10E: High-Speed Smart TMR Magnetometer, 15mT, SPI, TDFN6

The SM225-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with sophisticated digital signal processing for a unique combination of speed and precision. An SPI interface provides data as well as an external programming interface.

Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for optimal current sensing and easy mechanical interfaces. Key features include:
  •  0 to 150 Oe / 0 to 15 mT linear range
  •  Can detect magnets more than 50 mm away
  •  SPI interface
  •  2% of full-scale accuracy for 0 to 125°C
  •  Fast 15000 sample-per-second update rate
  •  Factory calibrated
  •  Programmable offset and gain compensation
  •  -40°C to +125°C operating range
  •  Ultraminiature 2.5 x 2.5 mm TDFN package

Part Number:
SM225-10E
Quantity in Stock:
40

$6.88

ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6

ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

A four-wire SPI interface provides angle data and allows setting device parameters.

The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR002-10E
Quantity in Stock:
87

$8.98

AG956-07E: ASR002-10E Smart SPI Angle Sensor Evaluation Kit

The AG956-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR002-10E Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR002-10E sensor
          - a diametrical magnet
          - magnet fixturing and a

    • An interface board with:
          - a microcontroller connected to the sensor via SPI
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG956-07E
Quantity in Stock:
32

$195.00

AG955-07E: Self-Contained SM12x Programmer

This self-contained module allows zeroing and programming the digital output threshold and hysteresis or SM124-10E or SM125-10E Smart Magnetometer without need of a computer or a customer microcontroller.

The 2.5" x 2.5" (64 mm x 64 mm) board has an I²C master microcontroller connected to the SM124.

A pushbutton for zeros the sensor, and miniature rotary thumbwheel switches provide three digits of resolution for the threshold and two for hysteresis. A custom TDFN-6 socket accommodates the 2.5 mm x 2.5 mm SM12x-10E. The module is powered by a small wall-mounted power supply (included).

Jumpers allow the sensor to be disconnected from the rest of the board so the board can be used as an interface to the customer’s electronics.

This module includes:

    • A 2.5 x 2.5 mm TDFN6 socket for a SM12x-10E Smart Magnetometer

    • A preprogrammed, onboard microcontroller

    • Two sets of thumbwheel switches for digital threshold and hysteresis

    • Two LEDs indicating the sensor’s output and successful programming

    • A 5-volt wall-mount power supply

Sensors are sold separately.

Part Number:
AG955-07E

$195.00

SM124-10E: General-Purpose 1 mT Smart GMR Magnetometer, TDFN6

The SM124-10E Smart Magnetometer combines an omnipolar GMR sensor element with with easy-to-use digital signal processing.

A digital output provides precise, programmable thresholds. An I²C interface provides magnetic field data, as well as a calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.

All commands, data, and coefficients are a single byte, and a slick, elegant data structure lets you get up and running with a minimum of firmware.

Key features include:
  • Can detect magnets more than 50 mm away
  • I²C and digital threshold outputs
  • 0-1 mT linear range
  • 8-bit / 1% output resolution
  • −40°C to +125°C operating range
  • 5% FS accuracy for 0 to 85°C
  • 10 kSps sample rate for fast response
  • 6 mA typical supply current
  • In-plane sensitivity more usable than Hall effect sensors
  • Programmable offset and gain compensation
  • Optional magnet temperature compensation   • 2.2 to 3.6 volt supply
  • Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package

Part Number:
SM124-10E
Quantity in Stock:
75

$6.88

AG952-07E: SM124-10E Smart GMR Magnetometer Evaluation Kit

The AG952-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM124-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM124-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG952-07E
Quantity in Stock:
10

$95.00

AG903B-07E: 0.75A/5A/50A GMR Current Sensor Evaluation Kit

The evaluation board includes three sensor over current-trace modules with three AAL024-10E TDFN current sensors.

The board measures 1.565" x 2.915" (40 mm by 74 mm), and includes three separable modules. The three modules are optimized to measure currents of 0-0.75A, 0-5A, and 0-50A.

Part Number:
AG903B-07E
Quantity in Stock:
2

$75.00

AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit

The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable SM324-10E Smart TMR Magnetometer. The kit includes:
    • An evaluation board with:
          - an SM324-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A powerful, intuitive graphical user interface.
    • Simple software installation.
    • Flexibility to power from USB or an external power supply.
    • Isolated USB interface for safety and noise minimization.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG951-07E
Quantity in Stock:
21

$245.00

SM324-10E: Ultraprecise Smart TMR Magnetometer, I2C, DFN6

The SM324-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with sophisticated digital signal processing for unmatched accuracy and precision. An I²C interface provides data as well as an external programming interface, and a digital output provides precise, programmable thresholds.

Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for optimal current sensing and easy mechanical interfaces. Key features include:
  • -2 to +2 mT
  • Detects polarity
  • Can detect magnets more than 50 mm away
  • I²C and digital threshold outputs
  • 24-bit output resolution
  • In-plane sensitivity more usable than Hall effect sensors
  • Programmable offset and gain compensation
  • Calibrated internal temperature sensor
  • Internal temperature compensation
  • 1.68 to 3.6 volt supply
  • Ultraminiature 2.5 x 2.5 x 0.8 mm DFN package

Part Number:
SM324-10E
Quantity in Stock:
1339

$6.88

IL011-3E: Low-Power, 2-Channel (both same direction) Isolator, 2.5 kV, SOIC8

The IL011-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.

Part Number:
IL011-3E

$6.29

IL017E: Low-Power, 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL017E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 3/1 channel configuration is ideal for isolating SPI. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL017E

$8.23

IL016E: Low-Power, 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC

The IL016E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL016E
Quantity in Stock:
81

$8.23

IL015E: Low-Power, 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL015E is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL015E
Quantity in Stock:
651

$8.23

IL012-3E: Low-Power, 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL012-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.

Part Number:
IL012-3E
Quantity in Stock:
19

$6.29

AG935-07E: 60-LED "Blinky" AAT003 Angle Sensor Demo Board

This kit includes a 5-inch by 5-inch circuit board with an AAT003 Angle Sensor, 60 multicolor smart LEDs (6° spacing) to indicate rotation angle, and a preprogrammed, onboard ATtiny microcontroller. The microcontroller also provides a PWM angle output. The board is factory calibrated and can optionally be field calibration. A split-pole magnet, a magnet locating fixture, and a 5-volt wall mount power supply module are also included. The board comes preprogrammed, but the Arduino compatible software is available on Github/NveCorporation so you can use the routines in your own application.

Part Number:
AG935-07E
Quantity in Stock:
2

$150.00

AAL024-10E: 1.5 mT Noncontact Current Sensor, 2.2 KOhm, TDFN6

The AAL024-10E high-performance magnetometer has high sensitivity, high linearity, low-hysteresis, and cross-axis sensitivity, making it ideal for noncontact current-sensing. Features: 3.6 mv/V/Oe typical sensitivity for large output signals and low noise Wide linear range: 0.15 – 1.05 mT; 1.5 mT saturation 2.2 kΩ bridge resistance/1.1 kΩ output impedance for easy interface Low offset: 4 mV/V max. Low hysteresis: 2% max. for excellent repeatability Wide bandwidth: 100 kHz 63 V minimum inherent isolation (pad to electrical connections) Ultraminiature 2.5 mm x 2.5 mm TDFN6 package Applications: Current sensing Low-field sensing for magnetic media Earth’s magnetic field detection Low-Hysteresis Magnetometer—
senses fields from permanent magnets, earth, and current sources.  Typ. Saturation Field (Oe)   Linear Range(|Oe|) 
min.-max.  Sensitivity (mV/V/Oe) 
min.-max.  Resistance 
(Ohms)  Package  15 1.5 - 10.5 3.0 - 4.2  2200 ±20%  TDFN6
(RoHS) Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.

Part Number:
AAL024-10E
Quantity in Stock:
7859

$9.60

AG919-06: MSOP8 PCB (2" x 0.25"; cross-axis orientation)

The AG919-06 is a 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; order sensors separately). The MSOP8 is rotated 90 degrees compared to the AG918-06.

Part Number:
AG919-06
Quantity in Stock:
6

$4.25

AA007-00E: 50 mT Sat. Analog Sensor, 5 KOhm, RoHS MSOP

The AA007-00E GMR Magnetic Field Sensors are used to sense relatively high fields. 0.1 mV/V/Oe Sensitivity; 500 Oe Saturation Field; MSOP8.
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AA007-00E

$9.60

AG904-06: ULLGA General-Purpose PCB

A 1.2 x 0.25 inch x 0.031 inch thick (30 x 6 x 0.75 mm) PCB for demonstrating 1.1 x 1.1 mm ULLGA4 sensors (-14E sensor suffix; order sensors separately).

Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.

Part Number:
AG904-06
Quantity in Stock:
237

$5.00

AG039-06: ULLGA Digital Sensor Demonstration Bare Board

A 1.57 x 0.25 inch PCB for demonstrating ADLxxx-14E/AHLxxx-14E 1.1 x 1.1 mm ULLGA4 digital sensors (order sensors separately). In addition to space for the sensor, the boards have locations for 0402-size pull-up resistors and bypass capacitors.

Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.

Part Number:
AG039-06
Quantity in Stock:
466

$5.00

AG911-07E: GMR Switch Evaluation Kit

AG911-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. A magnet and circuit boards for mounting the parts are included.

Part Number:
AG911-07E
Quantity in Stock:
11

$65.00

AG910-07E: GMR Switch Evaluation Kit w/ZIF socket

AG910-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. Magnets, circuit boards for mounting the parts, and a zero insertion force (ZIF) socket are also included.

Part Number:
AG910-07E
Quantity in Stock:
10

$90.00

AG934-07E: AAT101 Full-Bridge Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT101-10E Full-Bridge Angle Sensor, which provides two differential analog outputs, 90 degrees out of phase. The circuit board can be powered with a 0 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT101-10E Angle Sensor typical output amplitude is 400 mV/V peak-to-peak for each output.

Part Number:
AG934-07E
Quantity in Stock:
1

$75.00

AAK001-14E: 400 mT Sat. High-Field Magnetometer, 3.5 KOhm, ULLGA

The AAK001-14E is a high-field magnetometer sensor that provides precise sensing of magnetic fields up to 4 kOe (400 mT). With a unique 1.1 mm x 1.1 mm package package, it is also our smallest analog sensor. Features: Precise sensing of magnetic fields up to 4 kOe (400 mT)
Sensitive to fields of any direction in the IC plane
Ratiometric Wheatstone bridge outputs
Any operating supply voltage up to 12V
Ultraminiature 1.1 x 1.1 mm package Applications: Brushless DC motors
Motor commutator sensors
Noncontact high-current measurement
Harsh industrial applications Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.

Part Number:
AAK001-14E
Quantity in Stock:
24

$17.05

AFL006-10E: 0.4 mT Digital Sw, 0.9 V – 2 V, Norm OFF Sinking, TDFN

The AFL006-10E is the world's most sensitive magnetic switch. The switch is designed for use in low power and battery applications. It can operate from a single cell with supplies as low as 0.9 V and typical supply current of 55 microamps. Like all NVE magnetic sensors, the AFL006-10E has extremely precise magnetic operate and release points. Features: 4 Oe typical operate point for ultrahigh sensitivity 0.9 V – 2 V operating voltage for single-cell battery operation Less than 100 microwatts power consumption 2.5 mm x 2.5 mm x 0.8 mm TDFN6 for miniaturization Applications include: Portable instruments Utility meters Noncontact overcurrent protection Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL006-10E
Quantity in Stock:
195

$9.25

AAT101-10E: Full-Bridge Angle Sensor, 625 kOhm, TDFN6

AAT101-10E Angle Sensors use a Tunneling Magnetoresistance (TMR) full-bridges to produce a very high output signal without amplification. The sensors also have a wide airgap tolerance and high device resistance for low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: Full-Bridge TMR Angle Sensor Typ. p-p
Signal  Configuration   Min. Applied 
Field  Nonsinusoidality 
accuracy  Max. Op. 
Temp.  Typ. Device 
Resistance  Package   400 mV/V  Full bridge 30 Oe 1.5% 125°C 625 kΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
AAT101-10E
Quantity in Stock:
19880

$8.94

AAL004-10E: 1.5 mT Sat. Analog Sensor, 2.2 KOhm, TDFN6

The AAL004-10E high-performance magnetometer has high sensitivity and low-hysteresis, making it ideal for low-field applications. With a unique TDFN6 package, it is also our smallest analog sensor. Features: Output linear with magnetic fields as low as 1.5 Oe for low-field applications 3.5 mv/V/Oe typical sensitivity for large output signals and low noise 2% maximum hysteresis for precision and repeatability Omnipolar output for configuration flexibility –40 to 125°C Applications: Current sensing Low-field sensing for magnetic media Earth’s magnetic field detection Low-Hysteresis Magnetometer—
senses fields from permanent magnets, earth, and current sources.  Typ. Saturation Field (Oe)   Linear Range(|Oe|) 
min.-max.  Sensitivity (mV/V/Oe) 
min.-max.  Resistance 
(Ohms)  Package  15 1.5 - 10.5 3.0 - 4.2  2200 ±20%  TDFN6
(RoHS) Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.

Part Number:
AAL004-10E
Quantity in Stock:
17523

$9.60

IL3685-1E: 40 Mbps Isolated RS485 Transceiver, 2.5 kV, QSOP

The IL3685-1 is the industry's fastest isolated RS-485 transceiver (40 Mbps) in the industry's smallest package (QSOP16). 3.3 V or 5 V input logic; fully PROFIBUS compliant; 15 kV bus ESD protection; 50 kV per microsecond transient immunity. This part is lead (Pb) free.

Lead-free product information

Part Number:
IL3685-1E
Quantity in Stock:
3639

$6.89

IL3022E: Low-Cost Isolated RS422 Transceiver, 2.5 kV, Wide SOIC

The IL3022E is a cost-effective isolated 4 Mbps RS-422 full-duplex transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL3022E
Quantity in Stock:
13897

$5.05

AAT006-10E: Low-Field Angle Sensor, TDFN6

AAT006-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for operation at magnetic fields as low as 15 Oe, allowing an extremely wide airgap tolerance. The device has a large output without amplification, and high device resistance for low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package  200 mV/V  15 Oe 0.5 degrees 125°C 1.25 MΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426.

Part Number:
AAT006-10E
Quantity in Stock:
15000

$8.94

AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board

This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040C
Quantity in Stock:
27

$16.95

AG040B: ADL021 Battery-Powered Nanopower Sensor Demonstration Board

This kit includes a demo board with the ultraminiature, ultralow-power ADL021 magnetic switch. An LED shows the sensor output. The board is powered by a three-volt lithium coin cell (included), and the sensor quiescent power consumption is so low that the battery will last indefinitely. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Sensor quiescent current is only 100 nA typical; the sensor operate point is 20 Oe; and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040B
Quantity in Stock:
31

$19.95

AG941-07E: ADL-Series Sensor Demo Board

The kit includes a demo board with three ultraminiature, ultralow-power ADL-Series magnetic sensors. Each sensor drives an indicator LED, and a meter shows the sensor power in microamps or nanoamps. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The evaluation boards are 3.75 x 5 inches (95 x 127 mm), and are powered by a coin cell (included).

Part Number:
AG941-07E
Quantity in Stock:
3

$90.00

ADT002-10E: Low Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. The ADT002 is lower hysteresis than the ADT005 to provide accurate, absolute rotational quadrant information. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT002-10E
Quantity in Stock:
15099

$11.18

AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers.

Part Number:
AG931-07E
Quantity in Stock:
22

$75.00

AAT009-10E: Angle Sensor, 6 MOhm, TDFN6

AAT009-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for ultralow power, high output signal, and a wide airgap tolerance. Sine and cosine outputs provide full quadrature. The AAT009-10E version has the highest device resistance in the AAT product family (6 megaohms typ.), for the lowest power consumption.

Key specifications are as follows:
TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 6 MΩ TDFN6
The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426.

An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.

Part Number:
AAT009-10E
Quantity in Stock:
4870

$8.94

ADT001-10E: High Hysteresis, Rotation Quadrant Sensor w/high-field detection, TDFN6

ADT001-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. An additional output indicates a fault if the magnetic field is too high. The ADT001 is high hysteresis for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT001-10E
Quantity in Stock:
20519

$11.18

AG932-07E: ADT002 Rotation Sensor Evaluation Kit

The kit includes a circuit board with an ADT002 low hysteresis, ultralow-power rotation sensor, a split-pole magnet that can be turned, and simple circuitry to drive LEDs from the sensor outputs. Two LEDs follow the sensor outputs; four others indicate the rotational quadrant. A 3-volt coin cell (included) powers the board.

Part Number:
AG932-07E
Quantity in Stock:
11

$90.00

AG915-06: MSOP8 Printed Circuit Board (0.25" octagonal)

A 0.25-inch (6 mm) octagonal PCB for easy connections to MSOP8 sensors (-00E suffix; order sensors separately).

The PCB provides through holes for #28 or #30 wires.

Part Number:
AG915-06
Quantity in Stock:
822

$2.25

IL41050TTVE: Basic Isolated CAN Transceiver, 5 kV, Wide SOIC

The IL41050TTVE is a low-cost, 5 kV basic CAN transceiver without Vref output and silent mode input pins. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TTVE
Quantity in Stock:
89144

$4.19

IL41050TTE: Basic Isolated CAN Transceiver, 2.5 kV, Wide SOIC

The IL41050TT is a low-cost, basic CAN transceiver without Vref output and silent mode input pins. 2.5kV isolation; 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TTE
Quantity in Stock:
410

$3.62

IL41050TT-01: Low-Cost Isolated CAN Evaluation Board

This board provides a complete isolated Controller Area Network node using NVE's IL41050TTE isolated wide-body basic CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050TT-01
Quantity in Stock:
10

$49.95

IL41050WB-01: Isolated Wide-Body CAN Evaluation Board

The isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using NVE's popular IL41050TAE isolated wide-body CAN transceiver with true 8mm creepage.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050WB-01
Quantity in Stock:
4

$49.95

AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator

A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".

Part Number:
AG921-07E

$90.00

SMPS2-01: 2.5 kV MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has full 2.5 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS2-01
Quantity in Stock:
8

$199.95

SMPS1-01: IL711/IL610 MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel, failsafe, MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has 1.2 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS1-01
Quantity in Stock:
6

$199.95

ADL924-14E: 2.8 mT, 3V Nanopower GMR Switch, ULLGA

NVE's ADL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL924-14E
Quantity in Stock:
16218

$5.63

ADL921-14E: 2 mT, 3V Nanopower GMR Switch, ULLGA

NVE's ADL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency operation. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 V to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL921-14E
Quantity in Stock:
126723

$5.63

ADL021-14E: 2 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 55 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL021-14E
Quantity in Stock:
30041

$5.63

ADL024-14E: 2.8 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL024-14E
Quantity in Stock:
12960

$5.63

ADL124-14E: 2.8 mT, 3V, 30 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL124-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL124-14E
Quantity in Stock:
12215

$5.63

ADL121-14E: 2 mT, 3V, 30 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL121-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL121-14E
Quantity in Stock:
13074

$5.63

IL710V-1E: 2.5 kV, 1-Channel Isolator, MSOP

The IL710V-1 is a 3.3V/5V, single channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 2.5 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710V-1E
Quantity in Stock:
2160

$4.27

IL816TE: 4-Channel (2 each direction) Top-of-the-Line Isolator, 2.5 kV, Wide SOIC

The IL816TE is NVE's top-of-the-line four-channel isolator (2 each direction), with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique True 8 eight-millimeter creepage 16-pin wide-body SOIC package.

Part Number:
IL816TE
Quantity in Stock:
361

$8.40

IL814TE: 3-Channel (2 transmit, 1 receive) Top-of-the-Line Isolator, 2.5 kV, Wide SOIC

The IL814TE is NVE's top-of-the-line three-channel bidirectional isolator, with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique True 8 eight-millimeter creepage 16-pin wide-body SOIC package.

Part Number:
IL814TE
Quantity in Stock:
908

$6.89

IL262VE: 6 kV, 5-Channel (3 transmit, 2 receive) Isolator, Wide SOIC

The IL262VE is a 6 kVrms isolation, 3.3/5V, 5 channel (3 transmit; 2 receive) isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin RoHS wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL262VE

$9.40

IL261VE: 6 kV, 5-Channel (4 transmit, 1 receive) Isolator, Wide SOIC

The IL261VE is a 6 kVrms isolation, 3.3/5V, 5 channel (4 transmit; 1 receive) isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin RoHS wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL261VE
Quantity in Stock:
11

$9.40

IL260VE: 6 kV, 5-Channel (all same direction) Isolator, Wide SOIC

The IL260VE is a 6 kVrms isolation, 3.3/5V, 5 channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin RoHS wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL260VE
Quantity in Stock:
3372

$9.40

AG933-07E: AAT009 6 MOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT009-10E 6 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT009-10E Angle Sensor has ultra-ultra low power consumption and is ideal for long-term battery-powered operation or operation from harvested power.

Part Number:
AG933-07E

$75.00

IL712V-1E: 2.5 kV, 2-Channel (1 each direction) Isolator, MSOP

The IL712V-1 is a dual-channel bidirectional 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712V-1E
Quantity in Stock:
2908

$6.92

IL711V-1E: 2.5 kV, 2-Channel (both same direction) Isolator, MSOP

The IL711V-1 is a dual-channel bidirectional, 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711V-1E
Quantity in Stock:
18

$6.92

IL41050-1-01: QSOP Isolated CAN Evaluation Board

The QSOP isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using the world's smallest isolated CAN transceiver, the IL41050TA-1E.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050-1-01

$49.95

IL3085-1-01: RS-485 QSOP Isolator Evaluation Board

The RS-485 QSOP Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the world's isolated transceiver, the IL3085-1E. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3085-1-01
Quantity in Stock:
3

$74.95

IL41050TA-1E: High-Speed, Low-Power Isolated CAN Transceiver, QSOP

The IL41050TA-1E is an ultaminiature isolated CAN transceiver with no performance compromises. High-speed; low-power; 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin QSOP package--the world's smallest isolated transceiver.

Part Number:
IL41050TA-1E
Quantity in Stock:
2278

$4.52

IL3085-1E: 4 Mbps Isolated RS485 Transceiver, QSOP

The IL3085-1E is the world's smallest isolated RS-485 transceiver. It features 7 kV bus ESD protection and 50 kV per microsecond transient immunity.

16-pin QSOP package--the world's smallest isolated transceiver.

Part Number:
IL3085-1E
Quantity in Stock:
7994

$6.32

IL3685VE: 6 kV Isolated PROFIBUS-Compatible RS485 Transceiver, Wide SOIC

The IL3685 is a 6 kVrms isolated 40 Mbps RS-485 transceiver that is fully PROFIBUS compliant. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free.

Lead-free product information

Part Number:
IL3685VE
Quantity in Stock:
8253

$6.07

IL3522VE: 6 kV, High-Speed Isolated RS422 Transceiver, Wide SOIC

The IL3522VE is a 6 kVrms isolated, high-speed differential bus transceiver, designed for bidirectional data communications on balanced transmission lines. The IL3522 offers an exceptional 2.3 V differential output into a 54 ohm load, over the supply range of 4.5 V to 5.5 V. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3522VE
Quantity in Stock:
9234

$6.07

IL3585VE: 6 kV, High Speed Isolated RS485 Transceiver, Wide SOIC

The IL3585VE is a 6 kVrms isolated 40 Mbps RS-485 transceiver and is compatible with 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3585VE
Quantity in Stock:
7804

$6.07

IL711VE: 6 kV, 125C, 2-Channel (both same direction) Isolator, Wide SOIC

The IL711VE is a 6 kVrms isolation, 125C, 3.3/5V, two channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711VE
Quantity in Stock:
6117

$6.92

IL721VE: 6 kV, 125C, 2-Channel (1 each direction) Isolator, Wide SOIC

The IL721VE is a 6 kVrms isolation, 125C, 3.3/5V, two channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL721VE
Quantity in Stock:
3772

$6.92

IL715VE: 7 kV, 125C, 4-Channel (all same direction) Isolator, Wide SOIC

The IL715VE is a 7 kVrms isolation, 125C, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715VE
Quantity in Stock:
6683

$9.06

IL716VE: 7 kV, 125C, 4-Channel (2 each direction) Isolator, Wide SOIC

The IL716VE is a 7 kVrms isolation, 125C, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716VE
Quantity in Stock:
5351

$9.06

IL717VE: 7 kV, 125C, 4-Channel (3 transmit, 1 receive) Isolator, Wide SOIC

The IL717VE is a 7 kVrms isolation, 125C, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717VE
Quantity in Stock:
6235

$9.06

IL700-1-01: QSOP 4- and 5-Channel Isolator Evaluation Board

This evaluation board lets you try the world’s densest high-performance isolators.

The board includes five high-performance QSOP isolators:
- IL715-1E: 4-Channel (all same direction)
- IL716-1E: 4-Channel (2 each direction)
- IL717-1E: 4-Channel (3 transmit, 1 receive)
- IL260-1E: 5-Channel (all same direction)
- IL261-1E: 5-Channel (4 transmit, 1 receive)

IsoLoop QSOP isolators have best-in-class performance:
- 110 Mbps
- 2500 V isolation
- -40°C to +100°C
- 3 V to 5.5 V operation
- 44000 year barrier life
- True 4 mm creepage

Part Number:
IL700-1-01
Quantity in Stock:
4

$49.95

IL717-1E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, QSOP

The IL717-1 is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717-1E
Quantity in Stock:
6146

$7.69

IL716-1E: 4-Channel (2 each direction) Isolator, 2.5 kV, QSOP

The IL716-1 is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716-1E
Quantity in Stock:
8164

$7.69

IL715-1E: 4-Channel (all same direction) Isolator, 2.5 kV, QSOP

The IL715-1 is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715-1E
Quantity in Stock:
17994

$7.69

IL261-1E: 5-Channel (4 transmit, 1 receive) Isolator, 2.5 kV, QSOP

The IL261-1E is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL261-1E
Quantity in Stock:
12976

$8.54

IL260-1E: 5-Channel (all same direction) Isolator, 2.5 kV, QSOP

The IL260-1E is an ultraminiature isolator with no performance compromises. 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 600 WV per VDE 0884-10, 2500 Vrms isolation and 50 kV/microsecond transient immunity, and 44000 year barrier life. 16-pin QSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL260-1E
Quantity in Stock:
4439

$8.54

AAT003-10E: Angle Sensor, 40 kOhm, TDFN6

AAT003-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and low power. Sine and cosine outputs provide full quadrature. The sensor has a 40 kilohm device resistance and 20 kilohm output impedance, which is ideal for direct interface to microcontrollers. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 40 kΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.

Part Number:
AAT003-10E
Quantity in Stock:
5195

$8.94

IL521-3E: 2-Channel Isolator (1 each direction), 2.5 kV, SOIC8

The IL521-3 is a 3.3V/5V, dual-channel bidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL521-3E
Quantity in Stock:
15691

$5.67

IL817TE: 4-Channel (3 transmit, 1 receive) Top-of-the-Line Isolator, 2.5 kV, Wide SOIC

The IL817TE is NVE's top-of-the-line four-channel isolator (3 transmit, 1 receive), with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique True 8 eight-millimeter creepage 16-pin wide-body SOIC package.

Part Number:
IL817TE

$8.40

IL815TE: 4-Channel (all same direction) Top-of-the-Line Isolator, 2.5 kV, Wide SOIC

The IL815TE is NVE's top-of-the-line four-channel isolator (all same direction), with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique True 8 eight-millimeter creepage 16-pin wide-bodySOIC package.

Part Number:
IL815TE
Quantity in Stock:
2080

$8.40

IL821T-3E: 2-Channel (1 each direction) Top-of-the-Line Isolator, 2.5 kV, SOIC8

The IL821T-3E is NVE's top-of-the-line bidirectional isolator, with best-in-class specifications:
• 125 °C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part is an 8-pin SOIC RoHS package.

Part Number:
IL821T-3E
Quantity in Stock:
8195

$6.42

IL814T-3E: 3-Channel (2 transmit, 1 receive) Top-of-the-Line Isolator, 2.5 kV, Narrow SOIC

The IL814T-3E is NVE's top-of-the-line three-channel bidirectional isolator, with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's unique 16-pin narrow-body (0.15"-wide) SOIC package.

Part Number:
IL814T-3E
Quantity in Stock:
72

$6.89

IL721E: Widebody 2-Channel (1 each direction) Isolator, 2.5 kV, Wide SOIC

The IL721 is a high speed bidirectional isolator in NVE's unique True 8 mm creepage wide-body package. 110 Mbps, 100C, 10 ns propagation delay, 3 ns pulse width distortion. 16-pin True 8(TM) wide SOIC.

Part Number:
IL721E
Quantity in Stock:
39

$5.83

IL3085E: Low-Cost Isolated RS485 Transceiver, 2.5 kV, Wide SOIC

The IL3085E is a cost-effective isolated 4 Mbps RS-485 transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL3085E
Quantity in Stock:
16451

$5.05

IL3085-3E: Low-Cost Isolated RS485 Transceiver, 2.5 kV, Narrow SOIC

The IL3085-3 is a cost-effective isolated 4 Mbps RS-485 transceiver, compatible with 3.3 V or 5 V input logic. 7 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin narrow-body (0.15''-wide) SOIC package (Pb-free).

Part Number:
IL3085-3E
Quantity in Stock:
4968

$4.04

IL3585-3E: Very High Speed Isolated RS485 Transceiver, 2.5 kV, Narrow SOIC

The IL3585-3 is an isolated 40 Mbps RS-485 transceiver and is compatible with 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin narrow-body (0.15''-wide) SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3585-3E
Quantity in Stock:
9171

$5.28

IL3685-3E: PROFIBUS-Compatible Isolated RS485 Transceiver, 2.5 kV, Narrow SOIC

The IL3685-3 is an isolated 40 Mbps RS-485 transceiver that is fully PROFIBUS compliant. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin narrow-body (0.15''-wide) SOIC package This part is lead (Pb) free.

Lead-free product information

Part Number:
IL3685-3E
Quantity in Stock:
9588

$5.52

IL3685-3-01: PROFIBUS Isolator Evaluation Board

The PROFIBUS Isolated Transceiver Evaluation Board provides a complete isolated PROFIBUS node using the unique 0.15" narrow-body IL3685-3E isolated transceiver. The board provides screw terminal and PROFIBUS DB9 connections.

Termination, pull-up, and pull-down resistors are typical PROFIBUS values, and easily changed for specific applications.

The transceiver provides data rates to 40 Mbps, and is fully PROFIBUS compatible, including the stringent bus differential specifications.

Part Number:
IL3685-3-01
Quantity in Stock:
10

$74.95

IL3585-3-01: RS-485 Narrow-Body Isolator Evaluation Board

The RS-485 Narrow-Body Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the unique 0.15"-wide IL3585-3E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3585-3-01
Quantity in Stock:
10

$74.95

12426: Split-Pole Round Horseshoe Magnet

The 12426 is a split-pole Alnico-5 round horseshoe magnet, ideal for use with AAT-Series angle sensors.

The magnet is 11 mm diameter by 11 mm tall, with a 3.7 mm hole through the center for a variety of mounting options.


Typical field strength is 1100 Oe at the magnet face and thirty oersteds 12mm away. This magnet's strength allows a large airgap between the magnet and the sensor.

This magnet is included in our angle sensor evaluation kits.

Part Number:
12426
Quantity in Stock:
626

$8.95

AG930-07E: AAT001 1.25 MOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT001-10E 1.25 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture.

Part Number:
AG930-07E
Quantity in Stock:
19

$70.00

Technical Video DVD

Two dozen of NVE's most popular technical videos cover technology, NVE products, and practical application tips. Virtual actors Daniella, Jayne, Sandy, Dee, and N. V. e-Geek provide valuable information in a fun format.

So crank up the big screen, grab some popcorn, and invite some friends (98 minutes; NTSC format).

Part Number:
DVD

$14.95

IL41050-01: Narrow-Body Isolated CAN Evaluation Board

The CAN Evaluation Board provides a complete isolated Controller Area Network node using the popular IL41050TA-3E isolated narrow-body isolated CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050-01
Quantity in Stock:
9

$49.95

IL41050TAE: High-Speed, Low-Power Isolated CAN Transceiver, 2.5 kV, Wide SOIC

The IL41050TAE is a high-speed, low-power isolated ISO 11898 compliant CAN transceiver. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TAE
Quantity in Stock:
13567

$3.62

IL41050TA-3E: Isolated High-Speed, Low-Power Isolated CAN Transceiver, 2.5 kV, Narrow SOIC

The IL41050TA-3E is a high-speed, low-power isolated ISO 11898 compliant CAN transceiver. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin narrow-body (0.15'') RoHS SOIC package.

Part Number:
IL41050TA-3E
Quantity in Stock:
7283

$3.62

IL3585-01: RS-485 Wide-Body Isolator Evaluation Board

The RS-485 Wide-Body Isolator Evaluation Board provides a complete isolated RS-485 node using the popular 0.3" (8 mm) creepage IL3585E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3585-01
Quantity in Stock:
4

$74.95

IL600-01: IL600-Series Isolator Evaluation Board

The IL600-Series Isolator evaluation board lets you try a variety of NVE’s unique passive-input isolators.

The board has four IL600-Series isolators in four package types:
• IL613E (wide-body SOIC-16)
• IL614-3E (narrow-body SOIC-16)
• IL611-3E (SOIC-8)
• Open-drain IL610A-1E (MSOP-8)

A pushbutton and LED demonstrates the unmatched flexibility of these devices.

The award-winning IL600 and IL600A Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density.

Part Number:
IL600-01
Quantity in Stock:
4

$49.95

IL700-01: IL700-Series Isolator Evaluation Board

This evaluation board lets you try a variety of NVE’s flagship series of award-winning of IsoLoop Isolators.

The board has four IL700-Series isolators in four package types:
• IL716E (wide-body SOIC-16)
• IL715-3E (narrow-body SOIC-16)
• IL712-3E (SOIC-8)
• IL710S-1E (MSOP-8)

IL700-Series Isolators use patented spintronic Giant Magnetoresistive (GMR) technology. The symmetric magnetic coupling barrier provides a typical propagation delay of only 10 ns and a pulse width distortion as low as 300 ps, the best of any isolator. And their real ceramic/polymer barriers last pretty much forever.

Part Number:
IL700-01
Quantity in Stock:
1

$49.95

AG035-06: TDFN6 Printed Circuit Board

The AG035-06 Printed Circuit Board (PCB) is a 1.57 x 0.25 inch (40 x 6 mm) PCB for connection to 2.5 x 2.5 mm TDFN6 sensors (-10E suffix sensors; order sensors separately).

Part Number:
AG035-06
Quantity in Stock:
793

$4.25

AG918-06: MSOP8 Printed Circuit Board (2" x 0.25")

A 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; purchase sensors separately).

This PCB is also included in the AG910-07 and AG911-07 Sensor Evaluation Kits.

Part Number:
AG918-06
Quantity in Stock:
557

$4.25

IL721T-3E: 125C 2-Channel (reverse configuration) Isolator, 2.5 kV, SOIC8

The IL721T-3 is a high temperature, 3.3/5V dual-channel, bi-directional isolated buffer. Channel configuration is the reverse of the IL712T. 110 Mbps, CMOS compatible with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package.

Part Number:
IL721T-3E
Quantity in Stock:
29413

$6.29

IL721-3E: 2-Channel (reverse configuration) Isolator, 2.5 kV, SOIC8

The IL721-3 is a 3.3/5V, dual-channel bidirectional isolated buffer. The channel configuration is reversed from the IL712. CMOS-compatible with automatic level shifting, 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL721-3E
Quantity in Stock:
2839

$5.83

AD924-00E: 2.8 mT Digital Switch, RoHS MSOP

AD924-00E Sensors are for use with external high-current output transistors in industrial control environments. The parts provide the same precise magnetic performance as NVE's GMR Digital Switches with the addition of output stage short circuit protection (SCP). The protection circuit shuts off the output stage if there is a short circuit, then turns it back on after a specified interval. The sensor, combined with external reverse battery and overvoltage protection, results in a "bulletproof" assembly. Features: Precision Magnetic Operate Point -- 28 Gauss Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Sink/
Source/
Vreg/
SCP NBF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD924-00E
Quantity in Stock:
327

$5.63

AD724-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD724-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Regulated Voltage Output Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Sink/
Sink/
Vreg LBF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD724-00E
Quantity in Stock:
52

$4.89

AD324-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD324-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink GBF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD324-00E
Quantity in Stock:
40

$4.89

AD320-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD320-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink GBK Std. axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD320-00E
Quantity in Stock:
54

$4.89

AD221-00E: 2 mT Digital Switch, RoHS MSOP

NVE's AD221-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 20 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 15-25 5 0.4 Sink/Source FBB Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD221-00E
Quantity in Stock:
3698

$4.89

AD122-00E: 4 mT Digital Switch, RoHS MSOP

NVE's AD122-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 30-50 5 0.4 Current Source DBC Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD122-00E
Quantity in Stock:
3037

$4.89

AD105-00E: 4 mT Digital Switch, RoHS MSOP

NVE's AD105-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 30-50 5 0.4 Current Source DBG Std. axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD105-00E
Quantity in Stock:
48

$4.89

AD024-10E: 2.8 mT Digital Switch, RoHS TDFN

NVE's AD024-10 GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Ultra-miniature 2.5 mm x 2.5 mm TDFN Package Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink BBL Cross axis TDFN6
(RoHS) Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD024-10E
Quantity in Stock:
55068

$4.89

AD023-00E: 8 mT Digital Switch, RoHS MSOP

NVE's AD023-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 80 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 60-100 5 0.4 Current Sink BBD Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD023-00E
Quantity in Stock:
6856

$4.89

AD020-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD020-00 GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point --28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink BBK Std. axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD020-00E
Quantity in Stock:
33

$4.89

AD006-00E: 8 mT Digital Switch, RoHS MSOP

NVE's AD006-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 80 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 60-100 5 0.4 Current Sink BBJ Std. axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD006-00E
Quantity in Stock:
1879

$4.89

AD005-00E: 4 mT Digital Switch, RoHS MSOP

NVE's AD005-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications:

Part Number:
AD005-00E
Quantity in Stock:
2008

$4.89

AD004-00E: 2 mT Digital Switch, RoHS MSOP

NVE's AD004-00 GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 20 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 15-25 5 0.4 Current Sink BBH Std. axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD004-00E
Quantity in Stock:
802

$4.89

ABL016-00E: 0.3 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL016-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.3 mm apart on the sensor IC, and the two sensors are phase shifted by 0.15 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.300 mm, and phase shift from sensor to sensor is 0.150 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL016-00E
Quantity in Stock:
491

$6.29

ABL015-10E: 0.5 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL015-10E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.5 mm apart on the sensor IC, and the two sensors are phase shifted by 0.25 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.500 mm, and phase shift from sensor to sensor is 0.250 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL015-10E

$6.29

ABL015-00E: 0.5 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL015-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.5 mm apart on the sensor IC, and the two sensors are phase shifted by 0.25 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.500 mm, and phase shift from sensor to sensor is 0.250 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL015-00E
Quantity in Stock:
4709

$6.29

ABL014-10E: 1 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL014-10E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 1.0 mm apart on the sensor IC, and the two sensors are phase shifted by 0.5 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm, and phase shift from sensor to sensor is 0.500 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL014-10E
Quantity in Stock:
7301

$6.29

ABL014-00E: 1 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL014-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 1.0 mm apart on the sensor IC, and the two sensors are phase shifted by 0.5 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm, and sensor-to-sensor phase shift is 0.500 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL014-00E
Quantity in Stock:
432

$6.29

ABL006-00E: 0.3 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL006-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.3 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.300 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL006-00E
Quantity in Stock:
771

$5.19

ABL005-00E: 0.5 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL005-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.5 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.500 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL005-00E
Quantity in Stock:
9721

$5.19

ABL004-00E: 1 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL004-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 1.0 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL004-00E
Quantity in Stock:
1954

$5.19

12249: 12.5 mm Dia. x 3.5 mm Diametrically-Magnetized Disk Magnet

A diametrically-magnetized for use with AAT- and ADT-Series angle sensors. The magnet material is C5/Y25 ferrite or similar.Typical field strength is 1000 Oe at the magnet face.

Part Number:
12249
Quantity in Stock:
1476

$2.85

AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6

AAT001-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and very high device resistance for extremely low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 1.25 MΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
AAT001-10E
Quantity in Stock:
216638

$8.94

ACT001-10E: In-line Analog Current Sensor, DFN6 Package

The ACT001-10E is a high-sensitivity, inline analog TMR current sensor for AC or DC measurements. An integrated current strap senses current, and a TMR bridge sensor element provides a Wheatstone bridge differential output. The output is bipolar and proportional to the current through the strap. The sensor has a -500 mA to +500 mA linear range, with a typical sensitivity of 0.04 mV/V-mA. The part comes in an ultraminiature DFN6 package.

Part Number:
ACT001-10E
Quantity in Stock:
2000

$5.67

ADH025-00E: 1 mT Digital Switch, RoHS MSOP

NVE's ADH025-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Extremely Sensitive Magnetic Operate Point -- 10 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 3.0-6.0 8-12 3.5 0.4 Current Sink MBL Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
ADH025-00E

$5.63

AD084-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD084-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 3.0-6.0 0.7-1.2 21-34 5 0.4 Current Sink BDF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AD084-00E

$4.89

AD021-00E: 2 mT Digital Switch, RoHS MSOP

NVE's AD021-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 20 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 15-25 5 0.4 Current Sink BBB Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AD021-00E
Quantity in Stock:
239

$4.89

AD022-00E: 4 mT Digital Switch, RoHS MSOP

NVE's AD022-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 30-50 5 0.4 Current Sink BBC Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AD022-00E

$4.89

AD024-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD024-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink BBF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AD024-00E

$4.89

IL516-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL516 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL516-3E
Quantity in Stock:
2374

$7.38

IL516E: 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC

The IL516 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL516E
Quantity in Stock:
4769

$7.38

IL515E: 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL515 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, with output enable and optional external synchronization clock. 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL515E
Quantity in Stock:
1643

$7.38

IL514E: 3-Channel (2 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL514 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL514E
Quantity in Stock:
47502

$6.99

IL514-3E: 3-Channel (2 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL514-3 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL514-3E
Quantity in Stock:
8160

$6.99

IL511-1E: 2-Channel Isolator (both same direction), 1 kV, MSOP

The IL511-1 is a 3.3V/5V, dual-channel unidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 1 kVrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. Unique 8-pin MSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL511-1E
Quantity in Stock:
24

$5.67

IL510-1E: 1-Channel Isolator, 1 kV, MSOP

The IL510-1 is a 3.3V/5V, single-channel, 2 Mbps DC-correct digital isolator, with optional external synchronization clock, output enable, 25 ns propagation delay, 10 ns pulse width distortion with 1 kVrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. Unique 8-pin MSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL510-1E

$3.30

IL511-3E: 2-Channel Isolator (both same direction), 2.5 kV, SOIC8

The IL511-3 is a 3.3V/5V, dual-channel unidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL511-3E
Quantity in Stock:
16108

$5.67

IL510-3E: 1-Channel Isolator, 2.5 kV, SOIC8

The IL510-3 is a 3.3V/5V, single-channel, 2 Mbps DC-correct digital isolator, with optional external synchronization clock, output enable, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL510-3E
Quantity in Stock:
666

$3.30

AFL200-00E: 1 mT Digital Switch, 2.7 V – 3.6 V, Norm OFF Sinking

NVE's AFL200-00E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 2.7 Volts and continuous operation at currents of 20-55 microamps. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds Normally OFF Current Sinking Digital Output Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Low Power Applications Low Field Applications Supply
Voltage
min.-max. Supply
Current
(µA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 2.7-3.6 20-55 7-13 1 0.4 Current Sink PBGe Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL200-00E

$9.25

AFL000-00E: 1 mT Digital Switch, 0.9 V – 2 V, Norm OFF Sinking

NVE's AFL000-00E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents of 20-55 microamps. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds Low Voltage -- 0.9 V Low Power Digital Output Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Single Battery Applications Low Power, Low Field Applications Supply
Voltage
min.-max. Supply
Current
(µA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 0.9-1.3 20-55 7-13 1 0.4 Current Sink PBBe Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL000-00E
Quantity in Stock:
2987

$9.25

ADV001-00E: 0.4 mT Bipolar Switch, RoHS MSOP

NVE's ADV001-00E is a GMR Digital Switch using a bipolar output GMR material. This material allows the sensor to maintain an operate point with the application of a negative (South) magnetic field, and a release point with the application of a positive (North) magnetic field. The part is ideal for use with magnetic encoders that have alternating North/South poles, or in any other application where one polarity of field is required to turn the part on, and the opposite polarity is required to turn it off. Features: Bipolar Operation (south field ON, north field OFF) Extremely Sensitive Magnetic Operate Point -- 4 Oersteds Digital Output Frequency Response to >100 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op./
Release
(Oe)
ON|OFF Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 4|-4 2 0.4 Current Sink FCMe Cross axis MSOP8
(Pb) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
ADV001-00E
Quantity in Stock:
30928

$3.75

AFL100-10E: 1 mT Digital Sw, 1.8 V – 2.5 V, Norm OFF Sinking, TDFN

NVE's AFL100-10E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds (1 mT) Low Power Digital Output Ultraminiature 2.5 mm x 2.5 mm TDFN Package Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL100-10E
Quantity in Stock:
2132

$9.25

IL262E: 5-Channel (3 transmit, 2 receive) Isolator, 2.5 kV, Wide SOIC

The IL262E is a 3.3/5.0-volt, 5-channel (3 transmit; 2 receive) isolated, 110 MBaud CMOS compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL262E
Quantity in Stock:
4050

$8.54

IL262-3E: 5-Channel (3 transmit, 2 receive) Isolator, 2.5 kV, Narrow SOIC

The IL261-3E is a 3.3/5.0-volt, 5 channel (3 transmit; 2 receive) isolated, 110 MBaud CMOS compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL262-3E
Quantity in Stock:
4550

$8.54

ABH001-00E: 7 mT Sat. Gradiometer, 1.2 KOhm, RoHS MSOP

ABH001-00E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing of small gradients over a wide range of magnetic field strength. The devices are sensitive only to gradients with low sensitivity to constant external magnetic noise. This allows these sensors to operate in high noise environments, such as near electric motors or high-current wires. Key Features: Extremely High Sensitivity to Applied Magnetic Fields Wheatstone Bridge Analog Output Temperature to 150 degrees Continuous Wide Linear Range of Operation Near-Zero Voltage Operation DC to >1MHz Frequency Response MSOP Package Applications: General Differential Field Sensing Gear Tooth and Encoder Speed and Position Sensing Low Voltage, High Temperature Applications Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Resistor
Sensitivity
(%R/Oe)
min.-max. Resistance
(Ohms) Package 70 5 - 40 0.06 - 0.12 1,200 +/-20% MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
ABH001-00E
Quantity in Stock:
4001

$6.29

AB001-02E: 25 mT Sat. Gradiometer, 2.5 KOhm, RoHS SOIC

AB001-02E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing of small gradients over a wide range of magnetic field strength. The devices are sensitive only to gradients, and have low sensitivity to constant magnetic noise. Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 250 20 - 200 0.02 - 0.03 2,500 +/-20% SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AB001-02E
Quantity in Stock:
2925

$6.29

AB001-00E: 25 mT Sat. Gradiometer, 2.5 KOhm, RoHS MSOP

AB001-00E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing of small gradients over a wide range of magnetic field strength. The devices are sensitive only to gradients, and have low sensitivity to constant magnetic noise. Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 250 20 - 200 0.02 - 0.03 2,500 +/-20% MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AB001-00E
Quantity in Stock:
5009

$6.29

AAL002-02E: 1.5 mT Sat. Analog Sensor, 5.5 KOhm, RoHS SOIC

AAL002-02E Normalized Output GMR Field Sensors use a unique high-sensitivity GMR material, making them ideal for low-field applications. They also tolerate extremely high temperatures--up to 150 degrees Celsius. Features: High Sensitivity to Applied Magnetic Fields Low Hysteresis Wheatstone Bridge Analog Output 150 Degrees Celsius Continuous DC to >1MHz Frequency Response Applications: Low Voltage, High Temperature Applications Low-Field Sensing for Magnetic Media Detection Earth's Magnetic Field Detection Current Sensing General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 15 1.5 - 10.5 3.0 - 4.2 5,500 +/-20% SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AAL002-02E
Quantity in Stock:
287

$9.60

AAH004-00E: 1.5 mT Sat. Analog Sensor, 2 KOhm, RoHS MSOP, 150C

AAH004-00E Normalized Output GMR Field Sensors use a unique high-sensitivity GMR material, making them ideal for low-field applications. They also tolerate extremely high temperatures--up to 150 degrees Celsius. Features: Extremely High Sensitivity to Applied Magnetic Fields Wheatstone Bridge Analog Output 150 Degrees Celsius Continuous DC to >1MHz Frequency Response Applications: Low Voltage, High Temperature Applications Low-Field Sensing for Magnetic Media Detection Earth's Magnetic Field Detection Current Sensing General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 15 1.5 - 7.5 3.2 - 4.8 2,000 +/-20% MSOP8
(Pb) Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AAH004-00E
Quantity in Stock:
1206

$9.60

AAH002-02E: 0.6 mT Sat. Analog Sensor, 2 KOhm, RoHS SOIC, 150C

AAH002-02E Normalized Output GMR Field Sensors use a unique high-sensitivity GMR material, making them ideal for low-field applications. They also tolerate extremely high temperatures--up to 150 degrees Celsius. Features: Extremely High Sensitivity to Applied Magnetic Fields Wheatstone Bridge Analog Output 150 Degrees Celsius Continuous DC to >1MHz Frequency Response Applications: Low Voltage, High Temperature Applications Low-Field Sensing for Magnetic Media Detection Earth's Magnetic Field Detection Current Sensing General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 6 0.6 - 3.0 11 - 18 2,000 +/-20% SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AAH002-02E
Quantity in Stock:
6199

$9.60

AA006-00E: 5 mT Sat. Analog Sensor, 30 KOhm, RoHS MSOP

NVE's AA006-00E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 50 0.9 - 1.3 Analog Bridge 0.3mA@9V MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA006-00E
Quantity in Stock:
4097

$9.60

AA005-02E: 10 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA005-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 100 0.45 - 0.65 Analog Bridge High-Field Measurement SOIC8 (RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA005-02E
Quantity in Stock:
11669

$9.60

AA004-02E: 5 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA004-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 20 0.9 - 1.3 Analog Bridge Low-Field Measurement SOIC8 (RoHS) Note: Quantity Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA004-02E
Quantity in Stock:
6527

$9.60

AA004-00E: 5 mT Sat. Analog Sensor, 5 KOhm, RoHS MSOP

NVE's AA004-00E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 20 0.9 - 1.3 Analog Bridge Low-Field Measurement MSOP8 (RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA004-00E

$9.60

AA003-02E: 2 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA003-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 20 2.0 - 3.2 Analog Bridge Low-Field Measurement SOIC8 (RoHS) Note: Parts must be purchased in tube multiples (increments of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA003-02E
Quantity in Stock:
9064

$9.60

AA002-02E: 1.5 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA002-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 15 3.0 - 4.2 Analog Bridge Low-Field Measurement SOIC8 (RoHS) Note: Parts must be purchased in tube multiples (increments of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA002-02E
Quantity in Stock:
4220

$9.60

IL3685E: PROFIBUS-Compatible Isolated RS485 Transceiver, 2.5 kV, Wide SOIC

The IL3685 is an isolated 40 Mbps RS-485 transceiver that is fully PROFIBUS compliant. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL3685E
Quantity in Stock:
42391

$5.52

IL711T-1E: 125C 2-Channel (both same direction) Isolator, 1 kV, MSOP

The IL711T-1 is a high temperature, 3.3/5V, dual-channel, unidirectional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711T-1E
Quantity in Stock:
207

$6.29

IL710T-1E: 125C, 1-Channel Isolator, 1 kV, MSOP

The IL710T-1 is a high temperature, 3.3/5V, single channel, 110 Mbps, CMOS compatible, isolated buffer with automatic level shifting, output enable, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710T-1E
Quantity in Stock:
8

$3.89

IL712T-1E: 125C 2-Channel (1 each direction) Isolator, 1 kV, MSOP

The IL712T-1 is a high temperature, 3.3/5V dual-channel, bi-directional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL712T-1E

$6.29

IL485E: Isolated RS485/PROFIBUS Transceiver, 2.5 kV, Wide SOIC

Galvanically-isolated high-speed RS 485 differential bus transceiver with 2500 Vrms isolation, 2kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL485E
Quantity in Stock:
11889

$12.58

IL485WE: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC

The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL485WE

$12.58

IL717TE: 125C 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL717T is a high temperature, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717TE
Quantity in Stock:
6894

$8.23

IL717T-3E: 125C 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL717T-3 is a high temperature 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717T-3E
Quantity in Stock:
4327

$8.23

IL717E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL717 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717E
Quantity in Stock:
3432

$7.69

IL717-3E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL717-3 is a 3.3/5V, multi-channel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717-3E
Quantity in Stock:
61554

$7.69

IL716TE: 125C 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC

The IL716T is a high temperature, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716TE
Quantity in Stock:
3493

$8.23

IL716T-3E: 125C 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL716T-3 is a high temperature, 3.3/5V, multi-channel, isolated 110 Mbps CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716T-3E
Quantity in Stock:
1552

$8.23

IL716E: 4-Channel (2 each direction) Isolator, 2.5 kV, Wide SOIC

The IL716 is a 3.3-volt, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716E
Quantity in Stock:
16516

$7.69

IL716-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL716-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716-3E
Quantity in Stock:
4001

$7.69

IL715TE: 125C 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL715T is a high temperature, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715TE

$8.23

IL715T-3E: 125C 4-Channel (all same direction) Isolator, 2.5 kV, Narrow SOIC

The IL715T-3 is a high temperature 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715T-3E
Quantity in Stock:
7943

$8.23

IL715E: 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL715 is a 3.3/5V, multichannel isolated CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715E
Quantity in Stock:
9390

$7.69

IL715-3E: 4-Channel (all same direction) Isolator, 2.5 kV, Narrow SOIC

The Il715-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715-3E
Quantity in Stock:
25044

$7.69

IL712T-3E: 125C 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL712T-3 is a high temperature, 3.3/5V dual-channel, bi-directional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package.

Part Number:
IL712T-3E
Quantity in Stock:
12491

$6.29

IL712T-2E: 125C 2-Channel (1 each direction) Isolator, 2.5 kV, PDIP

The IL712T-2 is a high temperature, 3.3/5V dual-channel, bi-directional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712T-2E

$6.29

IL712-3E: 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL712-3 is a 3.3/5V, dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712-3E
Quantity in Stock:
70044

$5.83

IL712-2E: 2-Channel (1 each direction) Isolator, 2.5 kV, PDIP

The IL712-2 is a 3.3/5V dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712-2E

$5.83

IL711T-3E: 125C 2-Channel (both same direction) Isolator, 2.5 kV, SOIC8

The IL711T-3 is a high temperature, 3.3/5V, dual-channel, unidirectional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711T-3E
Quantity in Stock:
8120

$6.29

IL711T-2E: 125C 2-Channel (both same direction) Isolator, 2.5 kV, PDIP

The IL711T-2 is a high temperature, 3.3/5V, dual-channel, unidirectional, 110 Mbps, CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711T-2E
Quantity in Stock:
927

$6.29

IL711-3E: 2-Channel (both same direction) Isolator, 2.5 kV, SOIC8

The IL711-3 is a 3.3/5V dual-channel unidirectional 110 Mbaud CMOS-compatible isolated buffer with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711-3E
Quantity in Stock:
23324

$5.83

IL711-2E: 2-Channel (both same direction) Isolator, 2.5 kV, PDIP

The IL711-2 is a 3.3/5V, dual-channel unidirectional 110 Mbps CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711-2E
Quantity in Stock:
9382

$5.83

IL710T-3E: 125C, 1-Channel Isolator, 2.5 kV, SOIC8

The IL710T-3 is a high temperature, 3.3/5V, single channel, 110 Mbps, CMOS compatible, isolated buffer with automatic level shifting, output enable, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710T-3E
Quantity in Stock:
4029

$3.89

IL710T-2E: 125C 1-Channel Isolator, 2.5 kV, PDIP

The IL710T-2 is a high temperature, 3.3/5V, single channel, 110 Mbps, CMOS compatible, isolated buffer with automatic level shifting, output enable, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710T-2E
Quantity in Stock:
4306

$3.89

IL710-3E: 1-Channel Isolator, 2.5 kV, SOIC8

The IL710-3 is a 3.3V/5V, single-channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710-3E
Quantity in Stock:
38609

$3.58

IL710-2E: 1-Channel Isolator, 2.5 kV, PDIP

The IL710-2 is a 3.3/5V, single-channel, 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, output enable, 10 ns propagation delay, 3 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710-2E
Quantity in Stock:
3520

$3.58

IL3485-3E: High-Speed Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Up to 20 Mpbs, 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3485-3E

$4.19

IL3422-3E: High-Speed Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Up to 20 Mpbs, 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3422-3E
Quantity in Stock:
8894

$4.19

IL3285E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Wide SOIC

Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3285E
Quantity in Stock:
5959

$4.12

IL3222-3E: Fractional Load Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Isolated 1/8 fractional load RS422 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3222-3E
Quantity in Stock:
1533

$4.12

IL3185-3E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3185-3E
Quantity in Stock:
12180

$4.04

IL3122-3E: Low-Cost Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3122-3E
Quantity in Stock:
28249

$4.04

IL712-1E: 2-Channel (1 each direction) Isolator, 1 kV, MSOP

The IL712-1 is a 3.3/5V, dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL712-1E
Quantity in Stock:
36

$5.83

IL711-1E: 2-Channel (both same direction) Isolator, 1 kV, MSOP

The IL711-1 is a 3.3/5V dual-channel unidirectional 110 Mbaud CMOS-compatible isolated buffer with 10 ns propagation delay, 3 ns pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711-1E

$5.83

IL710-1E: 1-Channel Isolator, 1 kV, MSOP

The IL710-1 is a 3.3V/5V, single channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL710-1E
Quantity in Stock:
25

$3.58

IL710S-1E: 150 Mbps 1-Channel Isolator, 1 kV, MSOP

The IL710S-1 is a 3.3V/5V, single channel, 150 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 300 ps pulse width distortion with 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL710S-1E

$3.89

IL711S-1E: 150 Mbps 2-Channel (both same direction) Isolator, 1 kV, MSOP

The IL711S-1 is a 3.3/5V dual-channel unidirectional 150 Mbps CMOS-compatible isolated buffer with 10 ns propagation delay, 300 ps pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL711S-1E

$6.29

IL712S-1E: 150 Mbps 2-Channel (1 each direction) Isolator, 1 kV, MSOP

The IL712S-1 is a 3.3/5V, dual-channel bidirectional 150 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 300 ps pulse width distortion, 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.

Part Number:
IL712S-1E
Quantity in Stock:
8

$6.29

IL712S-3E: 150 Mbps 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL712S-3 is a 3.3/5V, dual-channel bidirectional 150 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 300 ps pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free.

Part Number:
IL712S-3E
Quantity in Stock:
11118

$6.29

IL711S-3E: 150 Mbps 2-Channel (both same direction) Isolator, 2.5 kV, SOIC8

The IL711S-3 is a 3.3/5V dual-channel unidirectional 150 Mbps CMOS-compatible isolated buffer with 10 ns propagation delay, 300 ps pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free.

Part Number:
IL711S-3E
Quantity in Stock:
1

$6.29

IL710S-3E: 150 Mbps 1-Channel Isolator, 2.5 kV, SOIC8

The IL710S-3 is a 3.3V/5V, single channel, 150 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 300 ps pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free.

Part Number:
IL710S-3E
Quantity in Stock:
1954

$3.89

IL3522E: High-Speed Isolated RS422 Transceiver, 2.5 kV, Wide SOIC

The IL3522 is a galvanically isolated, high-speed differential bus transceiver, designed for bidirectional data communications on balanced transmission lines. The IL3522 offers an exceptional 2.3 V differential output into a 54 ohm load, over the supply range of 4.5 V to 5.5 V. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3522E
Quantity in Stock:
9041

$5.52

IL422E: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC

Galvanically-isolated full-duplex RS 422 interface in a 0.3"-wide 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity. This part is lead (Pb) free. Lead-free product information

Part Number:
IL422E
Quantity in Stock:
3064

$12.58

IL3222E: Fractional Load Passive-Input Isolated RS422 Xcvr, 2.5 kV, Wide SOIC

Isolated 1/8 fractional load RS422 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3222E
Quantity in Stock:
4

$4.12

IL3122E: Low-Cost Passive-Input Isolated RS422 Xcvr, 2.5 kV, Wide SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3122E
Quantity in Stock:
4102

$4.04

IL3422E: High-Speed Passive-Input Isolated RS422 Xcvr, 2.5 kV, Wide SOIC

Up to 20 Mpbs, 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3422E
Quantity in Stock:
3966

$4.20

IL3485E: High-Speed Passive-Input Isolated RS485 Xcvr, 2.5 kV, Wide SOIC

Up to 20 Mpbs, 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3485E

$4.20

IL3185E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Wide SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3185E
Quantity in Stock:
2755

$4.04

IL611-1E: 2-Channel Passive Input, CMOS-Output Isolator, 1 kV, MSOP

The IL611-1E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-1E
Quantity in Stock:
1410

$5.67

IL612A-2E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL612A-2E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain transistor outputs, which can be used to replace optocouplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop GMR Sensor technology giving exceptionally small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin DIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612A-2E
Quantity in Stock:
524

$5.43

IL612-2E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL612-2E is a 3.3/5V, dual channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace optocouplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop GMR technology giving exceptionally small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin DIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612-2E
Quantity in Stock:
1412

$5.67

IL612-3E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL612-3E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace optocouplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptionally small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612-3E
Quantity in Stock:
9215

$5.67

IL610A-3E: 1-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL610A-3E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-3E
Quantity in Stock:
7878

$3.19

IL610A-1E: 1-Channel Passive Input, Open-Drain Isolator, 1 kV, MSOP

The IL610A-1E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-1E
Quantity in Stock:
4

$3.19

IL610-3E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL610-3E is a 3.3/5V, single channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-3E
Quantity in Stock:
4210

$3.50

IL610-2E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL610-2E is a 3.3/5V, single-channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-2E
Quantity in Stock:
5219

$3.50

IL610-1E: 1-Channel Passive Input, CMOS-Output Isolator, 1 kV, MSOP

The IL610-1E is a 3.3/5V, single-channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-1E

$3.50

IL3285-3E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3285-3E
Quantity in Stock:
59

$4.12

IL3585E: Very High Speed Isolated RS485 Transceiver, 2.5 kV, Wide SOIC

The IL3585 is an isolated 40 Mbps RS-485 transceiver and is compatible with 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3585E
Quantity in Stock:
6360

$5.52

IL260-3E: 5-Channel (all same direction) Isolator, 2.5 kV, Narrow SOIC

The IL260-3E is a 3.3/5.0-volt, 5-channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin, narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL260-3E
Quantity in Stock:
5666

$8.54

IL260E: 5-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL260E is a 3.3/5.0-volt, 5 channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin, wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL260E
Quantity in Stock:
12171

$8.54

IL614-3E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Narrow SOIC

The IL614-3E is a 3.3/5V, 3-channel (2 transmit, 1 receive), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.15" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL614-3E
Quantity in Stock:
378

$6.99

IL614E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Wide SOIC

The IL613-3E is a 3.3/5V, 3-channel (2 transmit, 1 receive), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop GMR Sensor technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.3" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL614E
Quantity in Stock:
803

$6.99

IL613E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Wide SOIC

The IL613E is a 3.3/5V, 3-channel (all in same direction), 100 Mbps isolated signal coupler with CMOS outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.3" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL613E
Quantity in Stock:
3094

$6.99

IL613-3E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Narrow SOIC

The IL613-3E is a 3.3/5V, 3-channel (all in same direction), 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop GMR Sensor technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.15" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL613-3E
Quantity in Stock:
1958

$6.99

IL612A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL612A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612A-3E
Quantity in Stock:
125

$5.43

12216: 6 mm Dia. x 4 mm Thick Disk Magnet

The 12216 magnet is a round, Y25 ferrite, 6 mm dia. x 4 mm thick disk magnet. Typical field strength is 1100 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.

Part Number:
12216
Quantity in Stock:
1513

$0.99

12032: 1.0" x 0.125" x 0.39" Bar Magnet

The 12032 is a 1.0" long x 0.125" wide x 0.39" thick Y25 ferrite bar magnet. Typical field strength is 1800 Oe at the magnet face. This magnet is also included in the AG910-07 and AG911-07 GMR Switch Evaluation Kits.

Part Number:
12032
Quantity in Stock:
86

$4.25

12030: 0.125" x 0.25" x 0.5" Bar Magnet

The 12030 is a 0.125 x 0.25 x 0.5 inch miniature ferrite bar magnet. Typical field strength is 1500 Oe at the magnet face and forty oersteds one-half inch away.

This magnet is also included in several sensor evaluation kits, including our Analog Sensor Evaluation Kit and Sensor Demo Board.

Part Number:
12030
Quantity in Stock:
2990

$3.25

12031: 0.312" Dia. x 0.125" Thick Disk Magnet

The 12031 is a 0.312" dia. x 0.125" thick Y25 ferrite disk magnet. Typical field strength is 900 Oe at the magnet face. This magnet is also included in our Analog Sensor Evaluation Kit.

Part Number:
12031
Quantity in Stock:
482

$0.99

12217: 3.5 mm Dia. x 4 mm Thick Disk Magnet

The 12217 magnet is a round, 3.5 mm dia. x 4 mm thick Y25 ferrite disk magnet. Typical field strength is 1700 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.

Part Number:
12217
Quantity in Stock:
4577

$0.99

AG005-06: SOIC8 Printed Circuit Board (0.5" square)

The AG005-06 Printed Circuit Board is a 0.5 x 0.5 inch (13 x 13 mm) PCB with SOIC8 solder pads and through holes for wires or a connector. The PCB allows easy connections to AA-Series SOIC8 sensors (-02E suffix; order separately).

This PCB is also included in the AG001-01 Analog Sensor Evaluation Kit.

Part Number:
AG005-06
Quantity in Stock:
632

$2.25

AG004-06: SOIC8 Printed Circuit Board (3" x 0.3")

A 3 x 0.3 inch (76 x 8 mm) PCB to demonstrate AA-Series SOIC sensors (-02E suffix; order sensors separately).

This PCB is also included in the AG001-01 Sensor Evaluation Kit.

Part Number:
AG004-06
Quantity in Stock:
1317

$4.25

DB002-02E: Signal Processing IC SOIC8

NVE's DB002-02 signal processing IC is designed to work with NVE's AD1xx series GMR switch as well as any other current sourcing or CMOS/TTL digital output sensor element, such as an inductive sensor or a photo sensor. This combination provides a high current switched output that corresponds to the sensor input. The DB002-02 functions as the front end of a complete sensor assembly, and includes protection against short circuits and high voltage transients from capacitive and inductive loads. The parts also feature thermal shutdown circuitry and reverse battery protection. It provides a regulated output voltage for the sensor and other components in the assembly, and an LED driver to indicate an "ON" condition. Features: High Current Output Reverse Battery and Transient Protection LED Driver Excellent Temperature and Voltage Performance Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 92 for quantities of 92 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
DB002-02E
Quantity in Stock:
5809

$4.25

IL611A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL611A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-3E
Quantity in Stock:
3121

$5.43

IL611A-2E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL611A-2E is a 3.3/5V, dual channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-2E
Quantity in Stock:
802

$5.43

IL611A-1E: 2-Channel Passive Input, Open-Drain Isolator, 1 kV, MSOP

The IL611A-1E is a 3.3/5V, dual channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-1E
Quantity in Stock:
4

$5.43

IL611-3E: 2-Channel Passive-Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL611-3E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-3E
Quantity in Stock:
9182

$5.67

IL611-2E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL611-2E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-2E
Quantity in Stock:
3357

$5.67

IL610A-2E: 1-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL610A-2E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain transistor output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-2E
Quantity in Stock:
730

$3.19

IL261E: 5-Channel (4 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL261E is a 3.3/5.0-volt, 5-channel (4 transmit; 1 receive) isolated, 110 MBaud CMOS compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL261E
Quantity in Stock:
9460

$8.54

IL261-3E: 5-Channel (4 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL261-3E is a 3.3/5.0-volt, 5 channel (4 transmit; 1 receive) isolated, 110 MBaud CMOS compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL261-3E
Quantity in Stock:
17077

$8.54

DB001-00E: Signal Processing IC MSOP

NVE's DB001-00E signal processing IC is designed to work with NVE's AD9xx series GMR switch with short circuit protection. This combination provides a high-current switched output that corresponds to the sensor input. The DB001-00E functions as the front end of a complete sensor assembly, and includes protection against short circuits and high voltage transients from capacitive and inductive loads. The parts also feature thermal shutdown circuitry and reverse battery protection. They provide a regulated output voltage for the sensor and other components in the assembly, and an LED driver to indicate an "ON" condition. Features: High Current Output Reverse Battery and Transient Protection LED Driver Excellent Temperature and Voltage Performance Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 when purchased in quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
DB001-00E

$4.25

DC002-10E: 5V High-Temp Voltage Regulator

The DC001-10E 5V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 5V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC002-10E
Quantity in Stock:
3167

$2.50

DC001-10E: 3.3V High-Temp Voltage Regulator

The DC001-10E 3.3 V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 3.3V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC001-10E
Quantity in Stock:
6339

$2.50

AG920-07E: GT Sensor Evaluation Kit

The kit includes one of each of NVE's analog and digital GT Sensors, two DD001-12E signal processing ICs, and several circuit boards for fixturing and testing the sensors.

Part Number:
AG920-07E
Quantity in Stock:
8

$65.00

AD924-00: 2.8 mT Digital Switch, MSOP

AD924-00 Sensors are for use with external high-current output transistors in industrial control environments. The parts provide the same precise magnetic performance as NVE's GMR Digital Switches with the addition of output stage short circuit protection (SCP). The protection circuit shuts off the output stage if there is a short circuit, then turns it back on after a specified interval. The sensor, combined with external reverse battery and overvoltage protection, results in a "bulletproof" assembly. Features: Precision Magnetic Operate Point -- 28 Gauss Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Sink/
Source/
Vreg/
SCP NBF Cross axis MSOP8
(Pb) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD924-00

$5.65

AKL003-12E: 0.3 mm, Digital Gear-Tooth Sensor, TDFN

NVE's AKL003-12E GMR GMR Gear Tooth Sensor is a digital output speed sensor for coarse-pitch gear tooth sensing and magnetic encoders. It is based on NVE's ABL006 differential sensor, and is easily biased with a permanent magnet for use with a gear-tooth style target. It provides a large airgap and 50% duty cycle current-modulated output over the -40C to +150C temperature range. This is a Lead (Pb) free, RoHS compliant part. Input Voltage Output Current (Typical) Airgap (Standard Target) Comments Package Digital Output Gear Tooth Sensor based on a differential sensor element; provides a current modulated output and 50% duty cycle over a wide range of temperatures and airgaps. 4.5 - 48 4mA Off / 8mA On 1.0mm to 2.5mm Gear Tooth or Encoder DFN8 Note: Parts must be purchased in multiples of 100 for quantities for 100 or more. This part is not recommended for new designs.

Part Number:
AKL003-12E
Quantity in Stock:
6980

$15.50

ABL016-10E: 0.3 mm, 2-Bridge Analog Gear-Tooth Sensor, TDFN

NVE's ABL016-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.3 mm apart on the sensor IC, and the two sensors are phase shifted by 0.15 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.300 mm, and phase shift from sensor to sensor is 0.150 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL016-10E
Quantity in Stock:
1990

$6.29

ABL006-10E: 0.3 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL006-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.3 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center to center distance between sensor elements is 0.300 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL006-10E
Quantity in Stock:
9000

$5.19

ABL004-10E: 1 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL004-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 1.0 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL004-10E
Quantity in Stock:
18259

$5.19

AA006-02E: 5 mT Sat. Analog Sensor, 30 KOhm, RoHS SOIC

NVE's AA006-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 50 0.9 - 1.3 Analog Bridge 0.3mA@9V SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA006-02E
Quantity in Stock:
2066

$9.60

IL485W: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC (Pb)

The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations.

Part Number:
IL485W
Quantity in Stock:
2559

$14.57

IL422: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC (Pb)

Galvanically-isolated full-duplex RS-422 interface in a 0.3" 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity.

Part Number:
IL422
Quantity in Stock:
94

$14.57

IL485: Isolated RS485/PROFIBUS Transceiver, 2.5 kV, Wide SOIC (Pb)

Galvanically-isolated high-speed RS-485 differential bus transceiver with 2500 Vrms isolation, 2 kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package.

Part Number:
IL485
Quantity in Stock:
690

$14.57

AG001-01E: GMR Analog Sensor Evaluation Kit

The AG001-01E GMR Analog Sensor Evaluation Kit is designed for experimentation and development. The kit contains an assortment of 14 NVE analog sensors plus several printed circuit boards and various permanent magnets. It includes the high-sensitivity AAH002 sensor. The kit contains only RoHS compliant parts.

Part Number:
AG001-01E
Quantity in Stock:
2

$60.00

Displaying 1 to 408 (of 408 products)