NVE's ADT923-14E Nanopower Switch integrates TMR sensor elements with digital onboard
signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA.
Features:
3.2 mT (32 Oe) Digital Switch
Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package
2.4 to 4.2 V
1 microamp quiescent current at 3 V without duty-cycling
Up to 20 kHz switching frequency
Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package
Applications:
Battery-Powered Devices
Portable Instruments
Wearables
The ALT023-10E is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor
with extraordinary sensitivity. The differential bridge
output is bipolar, meaning it is positive for a positive field and negative for
an opposite field polarity.
Features:
±1 mT linear range
Large signal (200 mV/V typical)
Extraordinary sensitivity (200 mV/V/mT typical)
Wheatstone bridge magnetometer configuration
0 - 10 V power supply
20 kiloohm device resistance for low power
High linearity output (
AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard
signal processing. The ultralow power TMR element provides nanopower without duty cycling.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
1 microamp Typical Supply Current
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
The AG957-07E provides easy connections to an ASR002-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads.
The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
The AG953H-07 demonstrates high current measurement with the SM225-10E Smart TMR Magnetometer. A 1/4" x 1/2" busbar is mounted to the PCB, and the sensor can detect up to +/-650 amps. Based on the AG953-07E Evaluation Kit, a powerful, intuitive graphical user interface allows the user to control sensor offset, calibration, filtering, and memory.
This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output.
The IL3685 is an isolated 40 Mbps RS-485 transceiver for 3.3V buses. 1/5 unit load supports up to 160 nodes. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.
This part is lead (Pb) free.
The ALT025 is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor
with an extraordinary amount of signal and linear range. The differential bridge
output is bipolar, meaning it is positive for a positive field and negative for
an opposite field polarity. The ALT025 has cross-axis sensitivity (across the pads).
Features:
High sensitivity (8 mV/V/mT typical)
Wheatstone bridge magnetometer configuration
0 - 10 V power supply
20 kiloohm device resistance for low power
±10 mT (±100 Oe) linear range
High linearity output (
AHT924-Series Nanopower Switches integrate TMR sensor elements with digital onboard
signal processing. The ultralow power TMR element provides nanopower without duty cycling.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
1 microamp Typical Supply Current
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard
signal processing. The ultralow power TMR element provides nanopower without duty cycling.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
1 microamp Typical Supply Current
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
AHT-Series Nanopower Switches integrate TMR sensor elements with digital onboard
signal processing. The ultralow power TMR element provides nanopower without duty cycling.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
1 microamp Typical Supply Current
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
NVE's AHL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing. The Nanopower Switch is extremely small and low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
35 Microamps Typical Supply Current
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
NVE's AHL925-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing. The Nanopower Switch is extremely small and low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
35 Microamps Typical Supply Current
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
NVE's AHL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing. The Nanopower Switch is extremely small and low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
35 Microamps Typical Supply Current
110 Hz Typical Update Frequency
Digital Switch Output
Applications:
Battery-Powered Devices
Portable Instruments
NVE's AHL025-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
95 nA Typical Supply Current
110 Hz Typical Update Frequency
Digital Switch Output
Integrated Duty-Cycle Operation
Applications:
Battery-Powered Devices
Portable Instruments
NVE's AHL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
95 nA Typical Supply Current
110 Hz Typical Update Frequency
Digital Switch Output
Integrated Duty-Cycle Operation
Applications:
Battery-Powered Devices
Portable Instruments
NVE's AHL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard
signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power.
Features:
Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package
Low Voltage Operation to 0.9 V
95 nA Typical Supply Current
110 Hz Typical Update Frequency
Digital Switch Output
Integrated Duty-Cycle Operation
Applications:
Battery-Powered Devices
Portable Instruments
The IL41050TFD-1E is an ultraminiature isolated CAN FD transceiver with no performance compromises. 125C; 5 Mbps; 3.3 V or 5.0 V input logic.
16-pin QSOP package--the world's smallest isolated transceiver.
The IL41050TFDE is an isolated CAN FD transceiver. 125C; 5 Mbps; 3.3 V or 5.0 V input logic.
16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.