New Products
IL7617VE: 4-channel (3 transmit, 1 receive) Isolator w/3.3-3.3V DC-DC Convertor
The IL7617VE is a four-channel (3 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7617VE
- Quantity in Stock:
- 224
$12.40
IL7612VE: Two-channel (one each direction) Isolator w/3.3-3.3V DC-DC Convertor
The IL7612VE is a two-channel (one each direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7612VE
- Quantity in Stock:
- 4
$11.16
ILDC11VE: 6 kV Isolation 1/4W 3.3-to-3.3V DC-DC Conv Wide SOIC
The ILDC11VE is a miniature, one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor. The part can be used to generate an isolated 3.3-volt bus supply from a controller supply.
NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide best-in-class 6 kV isolation and virtually unlimited barrier life.
The unique True-8(TM) package provides true eight-millimeter creepage in accordance with IEC60601. Maximum 5 mV peak-to-peak ripple means low noise.
The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.
Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.
A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.
- Part Number:
- ILDC11VE
- Quantity in Stock:
- 434
$5.98
12592: 5 mm pitch magnetic linear scale tape, 1 x 20 cm
This magnetic scale tape is designed to be used with AET500-00E 5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
- Part Number:
- 12592
$30.00
12591: 2 mm pitch magnetic linear scale tape, 1 x 20 cm
This magnetic scale tape is designed to be used with AET200-00E 2 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
- Part Number:
- 12591
$30.00
12590: 1 mm pitch magnetic linear scale tape, 1 x 20 cm
This magnetic scale tape is designed to be used with AET100F-00E 1 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
- Part Number:
- 12590
$30.00
12589: 0.5 mm pitch magnetic linear scale tape, 1 x 20 cm
This magnetic scale tape is designed to be used with AET050F-00E 0.5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.
- Part Number:
- 12589
- Quantity in Stock:
- 2
$30.00
AG970-07E: AET-Series TMR Linear Sensor Eval Kit
The AG970-07E Evaluation Kit helps test a variety AET-Series sensors with linear magnetic scales. The kit includes:
• All five AET-Series parts (unsoldered in tubes)
• A 3 x 4-inch (76 x 101 mm) PCB with test points and screw terminals
• Detachable fixturing for linear magnetic tape (tape sold separately)
- Part Number:
- AG970-07E
$65.00
AG965-07E: AET500-02E TMR Linear Sensor Demo Kit
The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor.
The kit includes:
• A 3 x 5-inch (76 x 127 mm) PCB
• An AET500-02E 5 mm pole-pitch sensor
• A four digit position display
• Part #12592 5mm pole pitch magnetic tape
• 3-D printed fixturing
• LEDs for pole detected
• Powered by three AAA batteries (included)
- Part Number:
- AG965-07E
- Quantity in Stock:
- 20
$195.00
AET500-02E: 5 mm, Half-Bridge TMR Rotational / Linear Sensor, SOIC
AET500-02E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The half-bridge configuration maximizes noise immunity and provides large 300 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET500-02E
- Quantity in Stock:
- 1561
$5.71
AET120F-00E: 1.2 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET120F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET120F-00E
$5.71
AET100F-00E: 1 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET100F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET100F-00E
- Quantity in Stock:
- 10714
$5.71
AET075F-00E: 0.75 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET075F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET075F-00E
$5.71
AET050F-00E: 0.5 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP
AET050F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.
The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.
Evaluation and Demonstration
Kits are also available.
- Part Number:
- AET050F-00E
$5.71
AG968-07E: SM228 15 mT I2C Smart TMR Magnetometer Breakout Board
The AG968-07E provides easy connections to an SM228-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).
- Part Number:
- AG968-07E
$19.95
AG969-07E: SM228-10E Smart I²C TMR Magnetometer Evaluation Kit
The AG969-07 Evaluation Kit has everything you need to test and evaluate
the easy-to-use SM228-10E I2C Smart Magnetometer. The kit includes:
• A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
- an SM228-10E sensor.
- a microcontroller connected to the sensor via I2C.
- a bus-bar for evaluating as a current sensor.
• An LED indicating the state of the threshold output.
• A PWM board output for an analog representation of the measured magnetic field.
• A simple, intuitive graphical user interface.
• Simple software installation.
• USB cable to connect the Evaluation Board to a computer.
• A small ceramic magnet for evaluating as a proximity sensor.
- Part Number:
- AG969-07E
- Quantity in Stock:
- 4
$95.00
SM228-10E: Smart TMR Magnetometer, 15 mT, I2C, TDFN6
The SM228-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with
sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface.
Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for
optimal current sensing and easy mechanical interfaces. Key features include:
• 0 to 150 Oe / 0 to 15 mT linear range
• Can detect magnets more than 50 mm away
• I2C interface
• Programmable digital threshold output
• 2% of full-scale accuracy for 0 to 125°C
• Fast 10000 sample-per-second update rate
• Factory calibrated
• Programmable offset and gain compensation
• -40°C to +125°C operating range
• Ultraminiature 2.5 x 2.5 mm DFN6 package
- Part Number:
- SM228-10E
- Quantity in Stock:
- 112
$6.88
AKT001-14E: 1.5 T Sat. Ultrahigh-Field TMR Magnetometer, 1 MOhm, DFN4
The AKT001-14E is an ultrahigh-field magnetometer sensor that provides precise sensing of magnetic fields up to 1.5 T (15 kOe). NVE’s unique Tunneling Magnetoresistive (TMR) technology provides unmatched field range, low power, and small size. Features: Tunneling Magnetoresistance (TMR) technology 1.5 T saturation 0.05 to 1 T linear range High resistance for battery powered applications Sensitive to fields of any direction in the IC plane Ratiometric Wheatstone bridge outputs Wide supply voltage range (
- Part Number:
- AKT001-14E
- Quantity in Stock:
- 289
$17.05
AG967-07E: ASR022 ABZ Smart TMR Encoder Sensor breakout board
The AG967-07E provides easy connections to an ASR022-10E ABZ TMR Encoder Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG967-07E
- Quantity in Stock:
- 14
$19.95
IL4622E: Isolated RS422 Transceiver w/3.3-3.3V DC-DC Convertor, 2.5 kV, Wide SOIC
The IL4622 is an isolated, full-duplex 40 Mbps 3.3-volt bus RS-422 / RS-485 transceiver with an integrated 3.3V-to-3.3V DC-DC convertor.
The transceiver runs up to 40 Mbps, has a 1/5 Unit Load.
The DC-DC convertor can output up to 80 mA and is fully regulated.
2500 VRMS isolation; 16.5 kV bus ESD protection; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL4622E
- Quantity in Stock:
- 4315
$9.32
