New Products

Displaying 21 to 40 (of 441 products)
AA007-00E-EVB01: 50 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA007-00E 50 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA007-00E-EVB01

$19.95

AA006-02E-EVB01: 5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA006-02E 5 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-02E-EVB01
Quantity in Stock:
50

$19.95

AA006-00E-EVB01: 5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA006-00E 5 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-00E-EVB01
Quantity in Stock:
50

$19.95

AA005-02E-EVB01: 10 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA005-02E 10 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA005-02E-EVB01
Quantity in Stock:
50

$19.95

AA004-02E-EVB01: 5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-02E 5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA004-02E-EVB01
Quantity in Stock:
50

$19.95

AA004-00E-EVB01: 5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-00E 5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA004-00E-EVB01
Quantity in Stock:
50

$19.95

AA003-02E-EVB01: 2 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA003-02E 2 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA003-02E-EVB01
Quantity in Stock:
49

$19.95

AA002-02E-EVB01: 1 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA002-02E 0.15 to 1.05 mT GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA002-02E-EVB01
Quantity in Stock:
100

$19.95

SM324-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM324-10E 0 to 1.5 mT precision Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has a sophisticated I2C interface.

Part Number:
SM324-10E-EVB01
Quantity in Stock:
46

$19.95

SM228-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM228-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use I2C interface and a digital threshold output.

Part Number:
SM228-10E-EVB01
Quantity in Stock:
50

$19.95

SM225-10E-EVB01: SPI 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM225-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use SPI interface.

Part Number:
SM225-10E-EVB01
Quantity in Stock:
49

$19.95

SM223-10E-EVB02: I2C 1.5 mT TMR Smart Current Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) noncontact current sensor evaluation board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor configured over a current-sensing circuit board trace. The board has a pre-soldered sensor, screw terminals for the current trace, a standard 0.1" (2.54 mm) header, and a 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM223-10E-EVB02
Quantity in Stock:
50

$19.95

SM223-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM223-10E-EVB01
Quantity in Stock:
50

$19.95

SM125-10E-EVB01: I2C 4 mT GMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM125-10E 0 to 4 mT Smart GMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM125-10E-EVB01
Quantity in Stock:
48

$19.95

SM124-10E-EVB01: I2C 1 mT GMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM124-10E 0 to 1 mT Smart GMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM124-10E-EVB01
Quantity in Stock:
46

$19.95

ILDC13V-15-01: 3.3-to-6V DFN6 DC-DC Conv Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards contain your choice of ILDC1x-Series DC-to-DC convertor, bypass capacitors as recommended, as well as test pads, screw terminals, provisions for header pins. LEDs that show the DC-to-DC convertor is operating.

The boards follow best practices including 2s2p with thermal vias for optimal thermal performance, and stitched ground planes to provide CISPR 32-compliant EMC mitigation with no external components. The boards have provisions for external components if additional EMC mitigation is desired.

The ILDC1xV-15 Series are ultraminiature one-quarter watt DC-to-DC convertors that generate independent outputs with 2.5 kV isolation from a 3.3-volt supply. 3.3, 5, and 6-volt output versions are available. No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads or other external components are generally not necessary for EMI mitigation.

Part Number:
ILDC13V-15-01
Quantity in Stock:
50

$84.95

IL712-3-01: 2-Ch (1 ea dir) SOIC8 Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL712-3E two channel (one each direction) high-speed isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The boards let you evaluate the world's best isolators.

Part Number:
IL712-1-01
Quantity in Stock:
50

$49.95

ALT026-10E-EVB01: 0-20 mT DFN6 TMR magnetometor breakout board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT026-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.

Part Number:
ALT026-10E-EVB01
Quantity in Stock:
55

$19.95

ALT026-10E: 0-20 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT026 is a Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with extraordinary signal amplitude and wide linear range. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. The ALT025 has cross-axis sensitivity (across the pads). Features: Large signal (200 mV/V) Wheatstone bridge magnetometer configuration 0 - 10 V power supply 20 kiloohm device resistance for low power ±20 mT (±200 Oe) linear range High linearity output (

Part Number:
ALT026-10E
Quantity in Stock:
227

$12.00

ILDC11V-15-01: 3.3-to-3.3V DFN6 DC-DC Conv Eval Board

These 2 x 3.5-inch (50 x 90 mm) boards contain your choice of ILDC1x-Series DC-to-DC convertor, bypass capacitors as recommended, as well as test pads, screw terminals, and header pins. LEDs that show the DC-to-DC convertor is operating.

The boards follow best practices including 2s2p with thermal vias for optimal thermal performance, and stitched ground planes to provide CISPR 32-compliant EMC mitigation with no external components. The boards have provisions for external components if additional EMC mitigation is desired.

The ILDC1xV-15 Series are ultraminiature one-quarter watt DC-to-DC convertors that generate independent outputs with 2.5 kV isolation from a 3.3-volt supply. 3.3, 5, and 6-volt output versions are available. No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads or other external components are generally not necessary for EMI mitigation.

Part Number:
ILDC15V-15-01
Quantity in Stock:
50

$84.95

Displaying 21 to 40 (of 441 products)