New Products

Displaying 181 to 200 (of 408 products)
ADT002-10E: Low Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. The ADT002 is lower hysteresis than the ADT005 to provide accurate, absolute rotational quadrant information. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT002-10E
Quantity in Stock:
15099

$11.18

AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers.

Part Number:
AG931-07E
Quantity in Stock:
22

$75.00

AAT009-10E: Angle Sensor, 6 MOhm, TDFN6

AAT009-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for ultralow power, high output signal, and a wide airgap tolerance. Sine and cosine outputs provide full quadrature. The AAT009-10E version has the highest device resistance in the AAT product family (6 megaohms typ.), for the lowest power consumption.

Key specifications are as follows:
TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 6 MΩ TDFN6
The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426.

An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.

Part Number:
AAT009-10E
Quantity in Stock:
4870

$8.94

ADT001-10E: High Hysteresis, Rotation Quadrant Sensor w/high-field detection, TDFN6

ADT001-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. An additional output indicates a fault if the magnetic field is too high. The ADT001 is high hysteresis for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT001-10E
Quantity in Stock:
20519

$11.18

AG932-07E: ADT002 Rotation Sensor Evaluation Kit

The kit includes a circuit board with an ADT002 low hysteresis, ultralow-power rotation sensor, a split-pole magnet that can be turned, and simple circuitry to drive LEDs from the sensor outputs. Two LEDs follow the sensor outputs; four others indicate the rotational quadrant. A 3-volt coin cell (included) powers the board.

Part Number:
AG932-07E
Quantity in Stock:
11

$90.00

AG915-06: MSOP8 Printed Circuit Board (0.25" octagonal)

A 0.25-inch (6 mm) octagonal PCB for easy connections to MSOP8 sensors (-00E suffix; order sensors separately).

The PCB provides through holes for #28 or #30 wires.

Part Number:
AG915-06
Quantity in Stock:
822

$2.25

IL41050TTVE: Basic Isolated CAN Transceiver, 5 kV, Wide SOIC

The IL41050TTVE is a low-cost, 5 kV basic CAN transceiver without Vref output and silent mode input pins. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TTVE
Quantity in Stock:
89144

$4.19

IL41050TTE: Basic Isolated CAN Transceiver, 2.5 kV, Wide SOIC

The IL41050TT is a low-cost, basic CAN transceiver without Vref output and silent mode input pins. 2.5kV isolation; 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TTE
Quantity in Stock:
410

$3.62

IL41050TT-01: Low-Cost Isolated CAN Evaluation Board

This board provides a complete isolated Controller Area Network node using NVE's IL41050TTE isolated wide-body basic CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050TT-01
Quantity in Stock:
10

$49.95

IL41050WB-01: Isolated Wide-Body CAN Evaluation Board

The isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using NVE's popular IL41050TAE isolated wide-body CAN transceiver with true 8mm creepage.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050WB-01
Quantity in Stock:
4

$49.95

AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator

A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".

Part Number:
AG921-07E

$90.00

SMPS2-01: 2.5 kV MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has full 2.5 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS2-01
Quantity in Stock:
8

$199.95

SMPS1-01: IL711/IL610 MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel, failsafe, MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has 1.2 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS1-01
Quantity in Stock:
6

$199.95

ADL924-14E: 2.8 mT, 3V Nanopower GMR Switch, ULLGA

NVE's ADL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency switching. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL924-14E
Quantity in Stock:
16218

$5.63

ADL921-14E: 2 mT, 3V Nanopower GMR Switch, ULLGA

NVE's ADL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency operation. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 V to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL921-14E
Quantity in Stock:
126723

$5.63

ADL021-14E: 2 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 55 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL021-14E
Quantity in Stock:
30041

$5.63

ADL024-14E: 2.8 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL024-14E
Quantity in Stock:
12960

$5.63

ADL124-14E: 2.8 mT, 3V, 30 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL124-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL124-14E
Quantity in Stock:
12215

$5.63

ADL121-14E: 2 mT, 3V, 30 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL121-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL121-14E
Quantity in Stock:
13074

$5.63

IL710V-1E: 2.5 kV, 1-Channel Isolator, MSOP

The IL710V-1 is a 3.3V/5V, single channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 2.5 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710V-1E
Quantity in Stock:
2160

$4.27

Displaying 181 to 200 (of 408 products)