New Products

Displaying 121 to 140 (of 408 products)
IL611-2E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL611-2E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-2E
Quantity in Stock:
3357

$5.67

DC002-10E: 5V High-Temp Voltage Regulator

The DC001-10E 5V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 5V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC002-10E
Quantity in Stock:
3167

$2.50

IL611A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL611A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-3E
Quantity in Stock:
3121

$5.43

IL613E: 3-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, Wide SOIC

The IL613E is a 3.3/5V, 3-channel (all in same direction), 100 Mbps isolated signal coupler with CMOS outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 16-pin 0.3" SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL613E
Quantity in Stock:
3094

$6.99

IL422E: Isolated RS422 Transceiver, 2.5 kV, Wide SOIC

Galvanically-isolated full-duplex RS 422 interface in a 0.3"-wide 16-pin SOIC package. 2500 Vrms isolation and 20 kV/microsecond transient immunity. This part is lead (Pb) free. Lead-free product information

Part Number:
IL422E
Quantity in Stock:
3064

$12.58

AD122-00E: 4 mT Digital Switch, RoHS MSOP

NVE's AD122-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 30-50 5 0.4 Current Source DBC Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD122-00E
Quantity in Stock:
3037

$4.89

IL7614VE: 3-channel (both same direction) Isolator w/3.3-3.3V DC-DC Convertor

The IL7614VE is a three-channel (2 transmit, 1 receive) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.

The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.

4 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL7614VE
Quantity in Stock:
3013

$11.78

12030: 0.125" x 0.25" x 0.5" Bar Magnet

The 12030 is a 0.125 x 0.25 x 0.5 inch miniature ferrite bar magnet. Typical field strength is 1500 Oe at the magnet face and forty oersteds one-half inch away.

This magnet is also included in several sensor evaluation kits, including our Analog Sensor Evaluation Kit and Sensor Demo Board.

Part Number:
12030
Quantity in Stock:
2990

$3.25

AFL000-00E: 1 mT Digital Switch, 0.9 V – 2 V, Norm OFF Sinking

NVE's AFL000-00E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 0.9 Volts and continuous operation at currents of 20-55 microamps. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds Low Voltage -- 0.9 V Low Power Digital Output Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Single Battery Applications Low Power, Low Field Applications Supply
Voltage
min.-max. Supply
Current
(µA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 0.9-1.3 20-55 7-13 1 0.4 Current Sink PBBe Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL000-00E
Quantity in Stock:
2987

$9.25

ADL922-14E: 4 mT, 3V Nanopower GMR Switch, DFN4

NVE's ADL922-14E Ultraminiature Nanopower Switch integrates GMR sensor elements with onboard digital signal processing. Continuous operation allows high frequency switching. External duty cycling allows nanopower operation. The part is packaged in a 1.1 x 1.1 x 0.35 mm DFN4 package. Features: Precise 4 mT operate point Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm DFN4 package 2.4 to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 100 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Wearables and IoT Sensors Battery-Powered Devices Industrial Sensors

Part Number:
ADL922-14E
Quantity in Stock:
2960

$5.63

IL4685E: Isolated RS485 Transceiver w/DC-DC Convertor, 2.5 kV, Wide SOIC

The IL4685 is an isolated 40 Mbps 3.3-volt bus RS-485 transceiver with an integrated 3.3V-to-3.3V DC-DC convertor.

The transceiver runs up to 40 Mbps, has a 1/5 Unit Load.

The DC-DC convertor can output up to 80 mA and is fully regulated.

2500 VRMS isolation; 16.5 kV bus ESD protection; 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL4685E
Quantity in Stock:
2930

$9.32

AB001-02E: 25 mT Sat. Gradiometer, 2.5 KOhm, RoHS SOIC

AB001-02E GMR Gradient Sensors (Gradiometers) offer unparalleled magnetic gradient sensing. Two pairs of unshielded GMR bridge resistors provide directional sensing of small gradients over a wide range of magnetic field strength. The devices are sensitive only to gradients, and have low sensitivity to constant magnetic noise. Differential magnetic field sensor (gradiometer) --
for gear tooth, multi-pole magnet, and high noise rejection sensing. Typ. Min. Saturation Field (Oe) Linear Range(|Oe|)
min.-max. Sensitivity (mV/V/Oe)
min.-max. Resistance
(Ohms) Package 250 20 - 200 0.02 - 0.03 2,500 +/-20% SOIC8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AB001-02E
Quantity in Stock:
2925

$6.29

IL712V-1E: 2.5 kV, 2-Channel (1 each direction) Isolator, MSOP

The IL712V-1 is a dual-channel bidirectional 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.

The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712V-1E
Quantity in Stock:
2908

$6.92

ALT025-14E: 0-10 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, DFN4

The ALT025-14E is an ultraminiature Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor with an extraordinary amount of signal. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: Tunneling Magnetoresistive Technology (TMR) Large signals (20 mV/V/mT typical) Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power ±10 mT linear range 1.1 x 1.1 mm DFN4 package –40 to 125°C Applications: Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics

Part Number:
ALT025-14E
Quantity in Stock:
2894

$12.00

IL721-3E: 2-Channel (reverse configuration) Isolator, 2.5 kV, SOIC8

The IL721-3 is a 3.3/5V, dual-channel bidirectional isolated buffer. The channel configuration is reversed from the IL712. CMOS-compatible with automatic level shifting, 110 Mbps, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL721-3E
Quantity in Stock:
2839

$5.83

IL3185E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Wide SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3185E
Quantity in Stock:
2755

$4.04

IL485W: Isolated RS485/PROFIBUS Transceiver w/Handshake, 2.5 kV, Wide SOIC (Pb)

The IL485W performs the same EIA-485 and PROFIBUS functions as the IL485, but has an additional uncommitted isolation channel which is useful for fault detection in bus contention situations.

Part Number:
IL485W
Quantity in Stock:
2559

$14.57

SM125-10E: General-Purpose 4 mT Smart GMR Magnetometer, TDFN6

The SM125-10E Smart Magnetometer combines an omnipolar GMR sensor element with with easy-to-use digital signal processing.

A digital output provides precise, programmable thresholds. An I²C interface provides magnetic field data, as well as a calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.

All commands, data, and coefficients are a single byte, and a slick, elegant data structure lets you get up and running with a minimum of firmware.

Key features include:
  • Can detect magnets more than 50 mm away
  • I²C and digital threshold outputs
  • 0-4 mT linear range
  • 8-bit / 1% output resolution
  • −40°C to +125°C operating range
  • 5% FS accuracy for 0 to 85°C
  • 10 kSps sample rate for fast response
  • 6 mA typical supply current
  • In-plane sensitivity more usable than Hall effect sensors
  • Programmable offset and gain compensation
  • Optional magnet temperature compensation   • 2.2 to 3.6 volt supply
  • Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package

Part Number:
SM125-10E
Quantity in Stock:
2437

$6.88

IL516-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL516 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL516-3E
Quantity in Stock:
2374

$7.38

IL41050TA-1E: High-Speed, Low-Power Isolated CAN Transceiver, QSOP

The IL41050TA-1E is an ultaminiature isolated CAN transceiver with no performance compromises. High-speed; low-power; 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin QSOP package--the world's smallest isolated transceiver.

Part Number:
IL41050TA-1E
Quantity in Stock:
2278

$4.52

Displaying 121 to 140 (of 408 products)