New Products

Displaying 41 to 60 (of 415 products)
ADL124-14E: 2.8 mT, 3V, 30 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL124-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 72 nW at 2.4 V 30 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL124-14E
Quantity in Stock:
12223

$5.63

View
IL3185-3E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3185-3E
Quantity in Stock:
12180

$4.04

View
IL260E: 5-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL260E is a 3.3/5.0-volt, 5 channel isolated, 110 Mbps, CMOS-compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin, wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL260E
Quantity in Stock:
12172

$8.54

View
IL485E: Isolated RS485/PROFIBUS Transceiver, 2.5 kV, Wide SOIC

Galvanically-isolated high-speed RS 485 differential bus transceiver with 2500 Vrms isolation, 2kV Bus ESD, and 20 kV/microsecond transient immunity. The IL 485 has a 35 Mbd data rate and is Profibus recognized. Available in a 0.3"-wide 16-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL485E
Quantity in Stock:
11889

$12.58

View
IL716-3E: 4-Channel (2 each direction) Isolator, 2.5 kV, Narrow SOIC

The IL716-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL716-3E
Quantity in Stock:
11888

$7.69

View
IL712S-3E: 150 Mbps 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL712S-3 is a 3.3/5V, dual-channel bidirectional 150 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 300 ps pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free.

Part Number:
IL712S-3E
Quantity in Stock:
11118

$6.29

View
AD005-00E: 4 mT Digital Switch, RoHS MSOP

NVE's AD005-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 40 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications:

Part Number:
AD005-00E
Quantity in Stock:
10805

$4.89

View
AHL025-14E: 1 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL025-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL025-14E
Quantity in Stock:
10000

$7.60

View
ABL005-00E: 0.5 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL005-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.5 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.500 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL005-00E
Quantity in Stock:
9721

$5.19

View
IL3685-3E: PROFIBUS-Compatible Isolated RS485 Transceiver, 2.5 kV, Narrow SOIC

The IL3685-3 is an isolated 40 Mbps RS-485 transceiver that is fully PROFIBUS compliant. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin narrow-body (0.15''-wide) SOIC package This part is lead (Pb) free.

Lead-free product information

Part Number:
IL3685-3E
Quantity in Stock:
9588

$5.52

View
ALT021-10E: 0-0.25 mT TMR Bipolar Analog Sensor, 20 KOhm, x-axis, TDFN6

The ALT021 is an ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetic sensor. The differential bridge output is bipolar, meaning it is positive for a positive field and negative for an opposite field polarity. Features: ±0.25 mT linear range Ultrahigh sensitivity (500 mV/V/mT typical) Large output signal (200 mV/V/mT typical) 0 - 10 V power supply Wheatstone bridge magnetometer configuration 20 kiloohm device resistance for low power Up to 300 kHz frequency bandwidth 2.5 x 2.5 mm TDFN6 package –40 to 125°C Applications: Motion, speed, and position control
Non-contact current sensing
Mechatronics and robotics
Navigation

Part Number:
ALT021-10E
Quantity in Stock:
9479

$12.00

View
IL261E: 5-Channel (4 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL261E is a 3.3/5.0-volt, 5-channel (4 transmit; 1 receive) isolated, 110 MBaud CMOS compatible logic buffers with 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 30 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL261E
Quantity in Stock:
9460

$8.54

View
IL711-2E: 2-Channel (both same direction) Isolator, 2.5 kV, PDIP

The IL711-2 is a 3.3/5V, dual-channel unidirectional 110 Mbps CMOS compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin PDIP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL711-2E
Quantity in Stock:
9406

$5.83

View
IL3522VE: 6 kV, High-Speed Isolated RS422 Transceiver, Wide SOIC

The IL3522VE is a 6 kVrms isolated, high-speed differential bus transceiver, designed for bidirectional data communications on balanced transmission lines. The IL3522 offers an exceptional 2.3 V differential output into a 54 ohm load, over the supply range of 4.5 V to 5.5 V. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3522VE
Quantity in Stock:
9233

$6.07

View
IL611-3E: 2-Channel Passive-Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL611-3E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-3E
Quantity in Stock:
9182

$5.67

View
IL3585-3E: Very High Speed Isolated RS485 Transceiver, 2.5 kV, Narrow SOIC

The IL3585-3 is an isolated 40 Mbps RS-485 transceiver and is compatible with 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin narrow-body (0.15''-wide) SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3585-3E
Quantity in Stock:
9171

$5.28

View
ABL006-10E: 0.3 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL006-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.3 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center to center distance between sensor elements is 0.300 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL006-10E
Quantity in Stock:
9123

$5.19

View
AA003-02E: 2 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA003-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 20 2.0 - 3.2 Analog Bridge Low-Field Measurement SOIC8 (RoHS) Note: Parts must be purchased in tube multiples (increments of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA003-02E
Quantity in Stock:
9064

$9.60

View
IL3422-3E: High-Speed Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Up to 20 Mpbs, 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3422-3E
Quantity in Stock:
8894

$4.19

View
IL3685VE: 6 kV Isolated PROFIBUS-Compatible RS485 Transceiver, Wide SOIC

The IL3685 is a 6 kVrms isolated 40 Mbps RS-485 transceiver that is fully PROFIBUS compliant. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free.

Lead-free product information

Part Number:
IL3685VE
Quantity in Stock:
8252

$6.07

View
Displaying 41 to 60 (of 415 products)