New Products

Displaying 1 to 20 (of 408 products)
AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6

AAT001-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and very high device resistance for extremely low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 1.25 MΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
AAT001-10E
Quantity in Stock:
216638

$8.94

ADT005-10E: High Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT005-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.

The ADT005 is higher hysteresis than the ADT002 for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction.

To minimize power, the ADT005 does not include the high-field detection circuitry included in the ADT001 version, and is slightly less accurate due to lower-power circuitry.

The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.

The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT005-10E
Quantity in Stock:
135200

$11.18

ADL921-14E: 2 mT, 3V Nanopower GMR Switch, ULLGA

NVE's ADL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency operation. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 V to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL921-14E
Quantity in Stock:
126723

$5.63

IL41050TTVE: Basic Isolated CAN Transceiver, 5 kV, Wide SOIC

The IL41050TTVE is a low-cost, 5 kV basic CAN transceiver without Vref output and silent mode input pins. 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TTVE
Quantity in Stock:
89144

$4.19

IL712-3E: 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL712-3 is a 3.3/5V, dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712-3E
Quantity in Stock:
70044

$5.83

IL717-3E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL717-3 is a 3.3/5V, multi-channel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717-3E
Quantity in Stock:
61554

$7.69

AD024-10E: 2.8 mT Digital Switch, RoHS TDFN

NVE's AD024-10 GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Ultra-miniature 2.5 mm x 2.5 mm TDFN Package Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink BBL Cross axis TDFN6
(RoHS) Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD024-10E
Quantity in Stock:
55068

$4.89

AHL025-14E: 1 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL025-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL025-14E
Quantity in Stock:
55000

$7.60

AHL924-14E: 2.8 mT, 1.5V, Nanopower GMR Switch, ULLGA

NVE's AHL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL924-14E
Quantity in Stock:
50000

$7.60

AHL023-14E: 6 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL023-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL023-14E
Quantity in Stock:
47801

$7.60

IL514E: 3-Channel (2 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL514 is a 3.3V/5V, multichannel 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL514E
Quantity in Stock:
47502

$6.99

AHL021-14E: 2 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL021-14E
Quantity in Stock:
46031

$7.60

IL3685E: PROFIBUS-Compatible Isolated RS485 Transceiver, 2.5 kV, Wide SOIC

The IL3685 is an isolated 40 Mbps RS-485 transceiver that is fully PROFIBUS compliant. 3.3 V or 5 V input logic. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage.

Part Number:
IL3685E
Quantity in Stock:
42391

$5.52

AHL921-14E: 2 mT, 1.5V, Nanopower GMR Switch, ULLGA

NVE's AHL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL921-14E
Quantity in Stock:
40000

$7.60

IL710-3E: 1-Channel Isolator, 2.5 kV, SOIC8

The IL710-3 is a 3.3V/5V, single-channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL710-3E
Quantity in Stock:
38609

$3.58

ADV001-00E: 0.4 mT Bipolar Switch, RoHS MSOP

NVE's ADV001-00E is a GMR Digital Switch using a bipolar output GMR material. This material allows the sensor to maintain an operate point with the application of a negative (South) magnetic field, and a release point with the application of a positive (North) magnetic field. The part is ideal for use with magnetic encoders that have alternating North/South poles, or in any other application where one polarity of field is required to turn the part on, and the opposite polarity is required to turn it off. Features: Bipolar Operation (south field ON, north field OFF) Extremely Sensitive Magnetic Operate Point -- 4 Oersteds Digital Output Frequency Response to >100 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op./
Release
(Oe)
ON|OFF Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 4|-4 2 0.4 Current Sink FCMe Cross axis MSOP8
(Pb) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
ADV001-00E
Quantity in Stock:
30928

$3.75

ADL021-14E: 2 mT, 3V, 55 Hz Duty-Cycled GMR Switch, ULLGA

NVE's ADL021-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 to 4.2 V Typical Power Consumption 192 nW at 2.4 V 55 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycling Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL021-14E
Quantity in Stock:
30041

$5.63

AHL024-14E: 2.8 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL024-14E
Quantity in Stock:
30000

$7.60

IL721T-3E: 125C 2-Channel (reverse configuration) Isolator, 2.5 kV, SOIC8

The IL721T-3 is a high temperature, 3.3/5V dual-channel, bi-directional isolated buffer. Channel configuration is the reverse of the IL712T. 110 Mbps, CMOS compatible with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package.

Part Number:
IL721T-3E
Quantity in Stock:
29413

$6.29

IL3122-3E: Low-Cost Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3122-3E
Quantity in Stock:
28249

$4.04

Displaying 1 to 20 (of 408 products)