New Products

Displaying 141 to 160 (of 376 products)
IL3185-3E: Low-Cost Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Features include 3.3 V or 5.0 V input logic, 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3185-3E
Quantity in Stock:
86

$4.04

12032: 1.0" x 0.125" x 0.39" Bar Magnet

The 12032 is a 1.0" long x 0.125" wide x 0.39" thick Y25 ferrite bar magnet. Typical field strength is 1800 Oe at the magnet face. This magnet is also included in the AG910-07 and AG911-07 GMR Switch Evaluation Kits.

Part Number:
12032
Quantity in Stock:
89

$4.25

IL611CMTI-1E: 2-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL611CMTI-1E is a two-channel version in an ultramniature MSOP8 package.

Part Number:
IL611CMTI-1E
Quantity in Stock:
91

$6.23

IL3222-3E: Fractional Load Passive-Input Isolated RS422 Xcvr, 2.5 kV, Narrow SOIC

Isolated 1/8 fractional load RS422 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3222-3E
Quantity in Stock:
100

$4.11

IL717E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC

The IL717 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717E
Quantity in Stock:
100

$7.68

AHK991-14E: 350 mT, 1.5V, TMR Switch, ULLGA

The unique AHK991-14E is a high-field, low voltage, low power, TMR magnetic switch.

The sensors have a 350 mT (3500 Oe) typical operate point, which is high enough to detect strong, rare-earth magnets in close proximity that disrupts lower-field sensors. The sensors can withstand unlimited fields without being damaged or turning off.

Unlike Hall effect or other sensors, the switch is sensitive to magnetic fields in any direction.

Key Specifications: 350 mT operate point 0.9 to 1.8 V 2 µA typical supply current 3000 Hz switching speed -40 to 85°C

Part Number:
AHK991-14E
Quantity in Stock:
121

$8.36

AET120F-00E: 1.2 mm, Full-Bridge TMR Rotational / Linear Sensor, MSOP

AET120F-00E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The full-bridge configuration maximizes noise immunity and provides large 600 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET120F-00E
Quantity in Stock:
123

$6.88

IL715-3E: 4-Channel (all same direction) Isolator, 2.5 kV, Narrow SOIC

The Il715-3 is a 3.3/5V, multichannel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715-3E
Quantity in Stock:
124

$7.68

IL717-3E: 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Narrow SOIC

The IL717-3 is a 3.3/5V, multi-channel isolated 110 Mbps CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin narrow-body (0.15"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL717-3E
Quantity in Stock:
168

$7.68

IL011-3E: Low-Power, 2-Channel (both same direction) Isolator, 2.5 kV, SOIC8

The IL011-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.

Part Number:
IL011-3E
Quantity in Stock:
171

$6.29

IL3285-3E: Fractional Load Passive-Input Isolated RS485 Xcvr, 2.5 kV, Narrow SOIC

Isolated 1/8 fractional load RS485 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin narrow-body (0.15'') SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3285-3E
Quantity in Stock:
173

$4.11

SM225-10E: High-Speed Smart TMR Magnetometer, 15mT, SPI, TDFN6

The SM225-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with sophisticated digital signal processing for a unique combination of speed and precision. An SPI interface provides data as well as an external programming interface.

Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for optimal current sensing and easy mechanical interfaces. Key features include:
  •  0 to 150 Oe / 0 to 15 mT linear range
  •  Can detect magnets more than 50 mm away
  •  SPI interface
  •  2% of full-scale accuracy for 0 to 125°C
  •  Fast 15000 sample-per-second update rate
  •  Factory calibrated
  •  Programmable offset and gain compensation
  •  -40°C to +125°C operating range
  •  Ultraminiature 2.5 x 2.5 mm TDFN package

Part Number:
SM225-10E
Quantity in Stock:
179

$4.68

ABL006-10E: 0.3 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL006-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 0.3 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center to center distance between sensor elements is 0.300 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL006-10E
Quantity in Stock:
187

$5.19

ADL921-14E: 2 mT, 3V Nanopower GMR Switch, ULLGA

NVE's ADL921-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. Continuous operation allows high frequency operation. The part is packaged in an ultraminiature ULLGA. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.35 mm ULLGA package 2.4 V to 4.2 V Typical Power Consumption 84 microwatts at 2.4 V without duty-cycling 250 kHz Operating Frequency Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
ADL921-14E
Quantity in Stock:
190

$5.15

AD024-00E: 2.8 mT Digital Switch, RoHS MSOP

NVE's AD024-00E GMR Switch integrates GMR sensor elements with digital onboard signal processing electronics. The GMR Switch has less field sensing errors than other magnetic sensors, and magnetic field operate points are stable over voltage and temperature extremes. This enables high precision, tight-tolerance magnetic sensing assemblies. Features: Precision Magnetic Operate Point -- 28 Oersteds Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Current Sink BBF Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AD024-00E
Quantity in Stock:
228

$3.75

IL715E: 4-Channel (all same direction) Isolator, 2.5 kV, Wide SOIC

The IL715 is a 3.3/5V, multichannel isolated CMOS-compatible logic buffers with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 50 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL715E
Quantity in Stock:
228

$7.68

AG035-06: TDFN6 Printed Circuit Board

The AG035-06 Printed Circuit Board (PCB) is a 1.57 x 0.25 inch (40 x 6 mm) PCB for connection to 2.5 x 2.5 mm TDFN6 sensors (-10E suffix sensors; order sensors separately).

Part Number:
AG035-06
Quantity in Stock:
229

$4.25

IL012-3E: Low-Power, 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL012-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.

Part Number:
IL012-3E
Quantity in Stock:
231

$6.29

ABL004-10E: 1 mm, 1-Bridge Analog Gear-Tooth Sensor, RoHS TDFN

NVE's ABL004-10 GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The part features differential sensor elements spaced 1.0 mm apart on the sensor IC arranged in a full bridge configuration. Bridge Resistance (Ohms) Linear Range (Oersteds) Output Comments Package Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 1.000 mm. 4K - 7K +/-5 to +/-100 Analog Bridge Gear Tooth or Encoder TDFN6 Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL004-10E
Quantity in Stock:
247

$5.19

IL3522E: High-Speed Isolated RS422 Transceiver, 2.5 kV, Wide SOIC

The IL3522 is a galvanically isolated, high-speed differential bus transceiver, designed for bidirectional data communications on balanced transmission lines. The IL3522 offers an exceptional 2.3 V differential output into a 54 ohm load, over the supply range of 4.5 V to 5.5 V. 15 kV bus ESD protection; 50 kV per microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. This part is lead (Pb) free. Lead-free product information

Part Number:
IL3522E
Quantity in Stock:
290

$5.51

Displaying 141 to 160 (of 376 products)