New Products
IL711V-1E: 2.5 kV, 2-Channel (both same direction) Isolator, MSOP
The IL711V-1 is a dual-channel bidirectional, 110 Mbaud CMOS-compatible isolated buffer with full 2.5 kVrms isolation voltage in a unique 8-pin MSOP package. 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity.
The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL711V-1E
- Quantity in Stock:
- 18
$6.92
IL7812VE: Two-channel (one each direction) Isolator w/3.3-5V DC-DC Convertor
The IL7812VE is a two-channel (one each direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7812VE
- Quantity in Stock:
- 18
$11.16
AG930-07E: AAT001 1.25 MOhm Angle Sensor Evaluation Kit
The kit includes a circuit board with an AAT001-10E 1.25 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture.
- Part Number:
- AG930-07E
- Quantity in Stock:
- 19
$70.00
AG974-07E: ACT001-10E Isolated Current Sensor Evaluation Board
This 2” x 2” square evaluation board allows you to test the remarkable
ACT001-10E current sensor and a common application circuit.
The ACT001-10E is a fully-isolated, inline current sensor with
an on-chip current strap. A Wheatstone bridge manufactured
with NVE’s state-of-the-art tunneling magnetoresistance (TMR)
sensor elements detects the magnetic field from the input current
across NVE’s unique polymer isolation barrier.
- Part Number:
- AG974-07E
- Quantity in Stock:
- 19
$50.00
ALT025-10E-EVB01: 0-10 mT DFN6 TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT025-10E-EVB01
- Quantity in Stock:
- 19
$19.95
IL012-3E: Low-Power, 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8
The IL012-3 is a low-power, 3.3/5V, 10 Mbps, 100C Isolator. Typical total quiescent current is just 0.3 mA per channel. 8-pin SOIC package.
- Part Number:
- IL012-3E
- Quantity in Stock:
- 19
$6.29
AG965-07E: AET500-02E TMR Linear Sensor Demo Kit
The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor.
The kit includes:
• A 3 x 5-inch (76 x 127 mm) PCB
• An AET500-02E 5 mm pole-pitch sensor
• A four digit position display
• Part #12592 5mm pole pitch magnetic tape
• 3-D printed fixturing
• LEDs for pole detected
• Powered by three AAA batteries (included)
- Part Number:
- AG965-07E
- Quantity in Stock:
- 20
$195.00
IL511-1E: 2-Channel Isolator (both same direction), 1 kV, MSOP
The IL511-1 is a 3.3V/5V, dual-channel unidirectional 2 Mbps DC-correct digital isolator, 25 ns propagation delay, 10 ns pulse width distortion with 1 kVrms isolation and 50 kV/microsecond typical transient immunity, -40°C to 85°C. Unique 8-pin MSOP. The "E" suffix indicates this part is lead (Pb) free.
- Part Number:
- IL511-1E
- Quantity in Stock:
- 20
$5.67
AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit
The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate
the remarkable SM324-10E Smart TMR Magnetometer. The kit includes:
• An evaluation board with:
- an SM324-10E sensor.
- a microcontroller connected to the sensor via I²C.
- a current-carrying trace under the sensor for evaluating as a current sensor.
• A powerful, intuitive graphical user interface.
• Simple software installation.
• Flexibility to power from USB or an external power supply.
• Isolated USB interface for safety and noise minimization.
• USB cable to connect the Evaluation Board to a computer.
• A small ceramic magnet for evaluating as a proximity sensor.
- Part Number:
- AG951-07E
- Quantity in Stock:
- 21
$245.00
AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit
The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers.
- Part Number:
- AG931-07E
- Quantity in Stock:
- 22
$75.00
AG961-07E: SM125 Smart GMR Magnetometer breakout board w/connector
The AG961-07E provides easy connections to an SM125-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
- Part Number:
- AG961-07E
- Quantity in Stock:
- 22
$24.95
IL7816VE: 4-channel (2 each direction) Isolator w/3.3-5V DC-DC Convertor
The IL7816VE is a four-channel (two each direction) 110 Mbps isolator with an integrated 3.3V-to-5V isolated DC-DC boost convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7816VE
- Quantity in Stock:
- 22
$12.40
IL710-1E: 1-Channel Isolator, 1 kV, MSOP
The IL710-1 is a 3.3V/5V, single channel, 110 Mbps CMOS-compatible isolated buffer, with enable, 10 ns propagation delay, 3 ns pulse width distortion with 1 kVrms isolation and 20 kV/microsecond transient immunity. Unique 8-pin MSOP package. This part is lead (Pb) free.
- Part Number:
- IL710-1E
- Quantity in Stock:
- 23
$3.58
AAH002-02E PCBA: Ultrahigh Sensitivity Analog Sensor Assembly
A preassembled circuit board with a high-sensitivity AAH002-02E sensor and a differential amplifier circuit with a gain of 25. The board can be powered by a 2.7 to 12 V supply and provides a single-ended output with a typical sensitivity of 3.75 V/V/mT (375 mV/V/Oe).The circuit board is 12.5 x 7.8 mm, with Vcc, GND, and OUT plated-through holes for wires or a header.
- Part Number:
- AAH002-02E PCBA
- Quantity in Stock:
- 27
$150.00
AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board
This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).
- Part Number:
- AG040C
- Quantity in Stock:
- 27
$16.95
AAT001-10E-EVB01: 1.25 MOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT001-10E 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT001-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT003-10E-EVB01: 40 kOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT003-10E40 kOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT003-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT006-10E-EVB01: 1.5 mT TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT006-10E1.5 mT, 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
- Part Number:
- AAT006-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT009-10E-EVB01: 6 MOhm TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT009-10E 6 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and draws less than a microwatt. It provides sine and cosine analog outputs.
- Part Number:
- AAT009-10E-EVB01
- Quantity in Stock:
- 30
$19.95
AAT101-10E-EVB01: Full-Bridge TDFN6 TMR Angle Sensor Eval Board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT101-10E Full-Bridge Tunneling Magnetoresistance (TMR) analog angle sensor.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 5.5 V supply and provides full-bridge sine and cosine analog outputs.
- Part Number:
- AAT101-10E-EVB01
- Quantity in Stock:
- 30
$19.95
