New Products

Displaying 81 to 100 (of 379 products)
AG919-06: MSOP8 PCB (2" x 0.25"; cross-axis orientation)

The AG919-06 is a 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; order sensors separately). The MSOP8 is rotated 90 degrees compared to the AG918-06.

Part Number:
AG919-06
Quantity in Stock:
5

$4.25

AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit

The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable SM324-10E Smart TMR Magnetometer. The kit includes:
    • An evaluation board with:
          - an SM324-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A powerful, intuitive graphical user interface.
    • Simple software installation.
    • Flexibility to power from USB or an external power supply.
    • Isolated USB interface for safety and noise minimization.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG951-07E
Quantity in Stock:
5

$245.00

AG953H-07E: SM225-10E Bussbar Current Sensor Demonstration

The AG953H-07 demonstrates high current measurement with the SM225-10E Smart TMR Magnetometer. A 1/4" x 1/2" busbar is mounted to the PCB, and the sensor can detect up to +/-650 amps. Based on the AG953-07E Evaluation Kit, a powerful, intuitive graphical user interface allows the user to control sensor offset, calibration, filtering, and memory.

Part Number:
AG953H-07E
Quantity in Stock:
5

$129.00

AG957-07E: ASR002 Smart TMR Angle Sensor breakout board

The AG957-07E provides easy connections to an ASR002-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG957-07E
Quantity in Stock:
5

$19.95

AG963-07E: ASR012-10E I²C Smart Angle Sensor Evaluation Kit

The AG963-07E Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR012-10E I2C Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR012-10E sensor
          - a diametrical magnet
          - magnet fixturing

    • An interface board with:
          - a microcontroller connected to the sensor via I²C
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG963-07E
Quantity in Stock:
5

$195.00

IL3085-1-01: RS-485 QSOP Isolator Evaluation Board

The RS-485 QSOP Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the world's isolated transceiver, the IL3085-1E. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3085-1-01
Quantity in Stock:
5

$74.95

IL700-1-01: QSOP 4- and 5-Channel Isolator Evaluation Board

This evaluation board lets you try the world’s densest high-performance isolators.

The board includes five high-performance QSOP isolators:
- IL715-1E: 4-Channel (all same direction)
- IL716-1E: 4-Channel (2 each direction)
- IL717-1E: 4-Channel (3 transmit, 1 receive)
- IL260-1E: 5-Channel (all same direction)
- IL261-1E: 5-Channel (4 transmit, 1 receive)

IsoLoop QSOP isolators have best-in-class performance:
- 110 Mbps
- 2500 V isolation
- -40°C to +100°C
- 3 V to 5.5 V operation
- 44000 year barrier life
- True 4 mm creepage

Part Number:
IL700-1-01
Quantity in Stock:
5

$49.95

12589: 0.5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET050F-00E 0.5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12589
Quantity in Stock:
6

$30.00

AG934-07E: AAT101 Full-Bridge Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT101-10E Full-Bridge Angle Sensor, which provides two differential analog outputs, 90 degrees out of phase. The circuit board can be powered with a 0 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT101-10E Angle Sensor typical output amplitude is 400 mV/V peak-to-peak for each output.

Part Number:
AG934-07E
Quantity in Stock:
6

$75.00

AG956-07E: ASR002-10E Smart SPI Angle Sensor Evaluation Kit

The AG956-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR002-10E Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR002-10E sensor
          - a diametrical magnet
          - magnet fixturing and a

    • An interface board with:
          - a microcontroller connected to the sensor via SPI
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG956-07E
Quantity in Stock:
6

$195.00

IL3585-01: RS-485 Wide-Body Isolator Evaluation Board

The RS-485 Wide-Body Isolator Evaluation Board provides a complete isolated RS-485 node using the popular 0.3" (8 mm) creepage IL3585E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3585-01
Quantity in Stock:
6

$74.95

SMPS1-01: IL711/IL610 MSOP Isolated 2.5W SMPS Demo Board

This board demonstrates an isolated, high-efficiency synchronous buck converter switch-mode power supply (SMPS) using the world’s smallest isolators, NVE IsoLoop® MSOP Isolators.

The output is 3.3V at 750 mA.

The board has three channels of isolation to ensure the output is electrically isolated from the input. A two-channel MSOP-8 isolator isolates synchronous rectification and a single-channel, failsafe, MSOP-8 isolator isolates output-voltage feedback. MSOP isolators minimize board area.

Despite the compact components, the board has 1.2 kV isolation and maintains 3 mm creepage.

Board dimensions are approx. 2 in. by 0.5 in.

Part Number:
SMPS1-01
Quantity in Stock:
6

$199.95

12591: 2 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET200-00E 2 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12591
Quantity in Stock:
7

$30.00

AG905-07E: ALT025 High Current PCB Demonstration

This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output.

Part Number:
AG905-07E
Quantity in Stock:
7

$75.00

AG933-07E: AAT009 6 MOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT009-10E 6 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT009-10E Angle Sensor has ultra-ultra low power consumption and is ideal for long-term battery-powered operation or operation from harvested power.

Part Number:
AG933-07E
Quantity in Stock:
7

$75.00

AG962-07E: SM125-10E Smart GMR Magnetometer Evaluation Kit

The AG962-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM125-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM125-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG962-07E
Quantity in Stock:
7

$95.00

IL700-01: IL700-Series Isolator Evaluation Board

This evaluation board lets you try a variety of NVE’s flagship series of award-winning of IsoLoop Isolators.

The board has four IL700-Series isolators in four package types:
• IL716E (wide-body SOIC-16)
• IL715-3E (narrow-body SOIC-16)
• IL712-3E (SOIC-8)
• IL710S-1E (MSOP-8)

IL700-Series Isolators use patented spintronic Giant Magnetoresistive (GMR) technology. The symmetric magnetic coupling barrier provides a typical propagation delay of only 10 ns and a pulse width distortion as low as 300 ps, the best of any isolator. And their real ceramic/polymer barriers last pretty much forever.

Part Number:
IL700-01
Quantity in Stock:
7

$49.95

12590: 1 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET100F-00E 1 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12590
Quantity in Stock:
8

$30.00

IL3685P-ILDC11-01: Isolated RS-485 Xcvr/DC-DC Conv Eval Bd

This Evaluation Board provides a complete isolated 3.3-volt RS-485 node using an IL3685PE isolated transceiver and an ILDC11-15E ultraminiature isolated DC-DC convertor. The 4 by 3 inch (100 by 75 mm) board provides screw terminal and test point connections.

The IL3685PE is a high-speed, fully-isolated, differential 3.3-volt bus transceiver.

The ILDC11-15E 3.3-to-3.3 volt DC-DC convertor provides a fully-isolated 3.3-volt bus supply using the controller supply.

Part Number:
IL3685P-ILDC11-01
Quantity in Stock:
8

$84.95

IL610A-1E: 1-Channel Passive Input, Open-Drain Isolator, 1 kV, MSOP

The IL610A-1E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-1E
Quantity in Stock:
8

$3.18

Displaying 81 to 100 (of 379 products)