A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).
Compatible with
AG93x-Series
and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.
Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.
A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).
Compatible with
AG93x-Series
and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.
Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.
The kit includes a demo board with three ultraminiature, ultralow-power ADL-Series magnetic sensors. Each sensor drives an indicator LED, and a meter shows the sensor power in microamps or nanoamps.
A miniature bar magnet is included so you can see for yourself how these remarkable sensors work.
The evaluation boards are 3.75 x 5 inches (95 x 127 mm), and are powered by a coin cell (included).
The AG953-07 Evaluation Kit has everything you need to test and evaluate
the easy-to-use SM225-10E Smart Magnetometer. The kit includes:
A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
- an SM225-10E sensor.
- a microcontroller connected to the sensor via SPI.
- a current-carrying trace under the sensor for evaluating as a current sensor.
A PWM board output for an analog representation of the measured magnetic field.
A simple, intuitive graphical user interface.
Simple software installation.
USB cable to connect the Evaluation Board to a computer.
A small ceramic magnet for evaluating as a proximity sensor.
The RS-485 QSOP Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the world's isolated transceiver, the IL3085-1E. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.
Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.
The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.
The ILDC13VE is a miniature, one-quarter watt fully-regulated 3.3V-to-5V DC-DC boost convertor. The part can be used to generate isolated RS-485 bus supplies, or power high-side gate supplies in H-bridges.
NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide best-in-class 4 kV isolation and virtually unlimited barrier life.
The unique True-8(TM) package provides true eight-millimeter creepage in accordance with IEC60601. Maximum 5 mV peak-to-peak ripple means low noise.
The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.
Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.
A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.
The AG962-07 Evaluation Kit has everything you need to calibrate, test, and evaluate
the easy-to-use SM125-10E Smart Magnetometer. The kit includes:
A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
- an SM125-10E sensor.
- a microcontroller connected to the sensor via I²C.
- a current-carrying trace under the sensor for evaluating as a current sensor.
A simple, intuitive graphical user interface.
Simple software installation.
USB cable to connect the Evaluation Board to a computer.
A small ceramic magnet for evaluating as a proximity sensor.
The AG969-07 Evaluation Kit has everything you need to test and evaluate
the easy-to-use SM228-10E I2C Smart Magnetometer. The kit includes:
A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
- an SM228-10E sensor.
- a microcontroller connected to the sensor via I2C.
- a bus-bar for evaluating as a current sensor.
An LED indicating the state of the threshold output.
A PWM board output for an analog representation of the measured magnetic field.
A simple, intuitive graphical user interface.
Simple software installation.
USB cable to connect the Evaluation Board to a computer.
A small ceramic magnet for evaluating as a proximity sensor.
The AG977-07E provides easy connections to an ASR003-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads.
The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-14E Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.
Isolated 1/8 fractional load RS422 transceiver compatible with 3.3 V or 5.0 V input logic. Additional features include 15 kV bus ESD protection, 5 Mbps data rate, and 20 kV per microsecond transient immunity. 16-pin wide-body (0.3'') SOIC package.
This part is lead (Pb) free.
Lead-free
product information
The RS-485 Wide-Body Isolator Evaluation Board provides a complete isolated RS-485 node using the popular 0.3" (8 mm) creepage IL3585E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.
Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.
The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.
The isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using NVE's popular IL41050TAE isolated wide-body CAN transceiver with true 8mm creepage.
The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.
The IL600-Series Isolator evaluation board lets you try a variety of NVE’s unique passive-input isolators.
The board has four IL600-Series isolators in four package types:
• IL613E (wide-body SOIC-16)
• IL614-3E (narrow-body SOIC-16)
• IL611-3E (SOIC-8)
• Open-drain IL610A-1E (MSOP-8)
A pushbutton and LED demonstrates the unmatched flexibility of these devices.
The award-winning IL600 and IL600A Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density.
The 2 x 3.5-inch (50 x 90 mm) boards contains the unique IL610A-1E passive-input, open-drain isolator. A pushbutton and LED demonstrate the remarkable flexibility of this devices. The evaluation board also has an input resistor, input capacitor, power-supply bypass capacitor as recommended, as well as screw connections, test points, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density. The MSOP package is the world's smallest isolator.
The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
The IL610A-1E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler).
This part is lead (Pb) free.
Lead-free
product information
The IL611A-1E is a 3.3/5V, dual channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers).
This part is lead (Pb) free.
Lead-free
product information
This evaluation board lets you try the worlds densest high-performance isolators.
The board includes five high-performance QSOP isolators:
- IL715-1E: 4-Channel (all same direction)
- IL716-1E: 4-Channel (2 each direction)
- IL717-1E: 4-Channel (3 transmit, 1 receive)
- IL260-1E: 5-Channel (all same direction)
- IL261-1E: 5-Channel (4 transmit, 1 receive)
IsoLoop QSOP isolators have best-in-class performance:
- 110 Mbps
- 2500 V isolation
- -40°C to +100°C
- 3 V to 5.5 V operation
- 44000 year barrier life
- True 4 mm creepage