New Products

Displaying 61 to 80 (of 379 products)
IL721VE: 6 kV, 125C, 2-Channel (1 each direction) Isolator, Wide SOIC

The IL721VE is a 6 kVrms isolation, 125C, 3.3/5V, two channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, and 50 kV/microsecond transient immunity. 16-pin wide-body SOIC package with True 8™ mm creepage. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL721VE

$7.26

IL860-1E: 5-Channel (all same direction) Top-of-the-Line Isolator, 2.5 kV, QSOP

The IL860-1E is NVE's top-of-the-line five-channel isolator, with best-in-class specifications:
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• 125 °C max. operating temperature
• 44000-year barrier life
• Low EMC footprint

The part uses NVE's 16-pin QSOP package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL860-1E

$9.39

SM124-10E: General-Purpose 1 mT Smart GMR Magnetometer, TDFN6

The SM124-10E Smart Magnetometer combines an omnipolar GMR sensor element with with easy-to-use digital signal processing.

A digital output provides precise, programmable thresholds. An I²C interface provides magnetic field data, as well as a calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.

All commands, data, and coefficients are a single byte, and a slick, elegant data structure lets you get up and running with a minimum of firmware.

Key features include:
  • Can detect magnets more than 50 mm away
  • I²C and digital threshold outputs
  • 0-1 mT linear range
  • 8-bit / 1% output resolution
  • −40°C to +125°C operating range
  • 5% FS accuracy for 0 to 85°C
  • 10 kSps sample rate for fast response
  • 6 mA typical supply current
  • In-plane sensitivity more usable than Hall effect sensors
  • Programmable offset and gain compensation
  • Optional magnet temperature compensation   • 2.2 to 3.6 volt supply
  • Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package

Part Number:
SM124-10E

$4.13

SM228-10E: Smart TMR Magnetometer, 15 mT, I2C, TDFN6

The SM228-10E Smart Magnetometer combines a Tunneling Magnetoresistance (TMR) sensor element with sophisticated digital signal processing for a unique combination of speed and precision. An I2C interface provides data as well as an external programming interface.

Unlike awkward, old-fashioned Hall-effect sensors, TMR is sensitive in-plane for optimal current sensing and easy mechanical interfaces. Key features include:
  •  0 to 150 Oe / 0 to 15 mT linear range
  •  Can detect magnets more than 50 mm away
  •  I2C interface
  •  Programmable digital threshold output
  •  2% of full-scale accuracy for 0 to 125°C
  •  Fast 10000 sample-per-second update rate
  •  Factory calibrated
  •  Programmable offset and gain compensation
  •  -40°C to +125°C operating range
  •  Ultraminiature 2.5 x 2.5 mm DFN6 package

Part Number:
SM228-10E

$4.68

Technical Video DVD

Two dozen of NVE's most popular technical videos cover technology, NVE products, and practical application tips. Virtual actors Daniella, Jayne, Sandy, Dee, and N. V. e-Geek provide valuable information in a fun format.

So crank up the big screen, grab some popcorn, and invite some friends (98 minutes; NTSC format).

Part Number:
DVD

$14.95

AG957-07E: ASR002 Smart TMR Angle Sensor breakout board

The AG957-07E provides easy connections to an ASR002-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG957-07E
Quantity in Stock:
1

$19.95

AG959-07E: SM225 High-Speed Smart TMR Magnetometer breakout board

The AG959-07E provides easy connections to an SM225-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG959-07E
Quantity in Stock:
1

$19.95

IL712-3E: 2-Channel (1 each direction) Isolator, 2.5 kV, SOIC8

The IL712-3 is a 3.3/5V, dual-channel bidirectional 110 Mbps CMOS-compatible isolated buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL712-3E
Quantity in Stock:
1

$5.82

IL717T: 125C 4-Channel (3 transmit, 1 receive) Isolator, 2.5 kV, Wide SOIC (Pb)

The IL717T is a high temperature, 3.3/5V, multi-channel, isolated, 110 Mbps, CMOS-compatible logic buffer with automatic level shifting, 10 ns propagation delay, 3 ns pulse width distortion, 2500 Vrms isolation and 20 kV/microsecond transient immunity. 16-pin wide-body (0.3"-wide) SOIC package.

Part Number:
IL717T
Quantity in Stock:
1

$8.23

ILDC11-01: Ultraminiature Isolated 3.3-to-3.3V DC-DC Conv Eval Bd

This Evaluation Board uses the world’s smallest DC-DC convertor, the ILDC11-15E.

The 1.75 by 1.75 inch (45 by 45 mm) board has an ILDC11-15E plus the three required external bypass capacitors as well as LEDs to show the DC-DC convertor is operating. Screw terminals provide easy connections.

The ILDC11 is an ultraminiature one-quarter watt DC-DC convertor that can be used to generate an isolated 3.3-volt bus supply from a 3.3-volt controller supply.

No additional regulation is required and there is no minimum load. Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

Part Number:
ILDC11-01
Quantity in Stock:
1

$49.95

AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board

The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040T
Quantity in Stock:
2

$19.95

AG967-07E: ASR022 ABZ Smart TMR Encoder Sensor breakout board

The AG967-07E provides easy connections to an ASR022-10E ABZ TMR Encoder Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG967-07E
Quantity in Stock:
2

$19.95

AG968-07E: SM228 15 mT I2C Smart TMR Magnetometer Breakout Board

The AG968-07E provides easy connections to an SM228-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG968-07E
Quantity in Stock:
2

$19.95

AG969-07E: SM228-10E Smart I²C TMR Magnetometer Evaluation Kit

The AG969-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM228-10E I2C Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM228-10E sensor.
          - a microcontroller connected to the sensor via I2C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • An LED indicating the state of the threshold output.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG969-07E
Quantity in Stock:
2

$95.00

ILDC11-15E: Ultraminiature Isolated 1/4W 3.3-to-3.3V DC-DC Conv

The ILDC11-15E is a one-quarter watt fully-regulated 3.3V-to-3.3V DC-DC convertor in an ultraminiature 3 mm x 5.5 mm DFN6 package. The part can be used to generate an isolated 3.3-volt bus supply from a controller supply.

NVE’s proven IsoLoop® isolation technology and a unique ceramic/polymer composite barrier provide full 2.5 kV isolation and virtually unlimited barrier life.

The device minimizes board space and parts count, requiring just three external capacitors. No additional regulation is required and there is no minimum load.

Frequency hopping and shielding reduce EMI, and ferrite beads are not necessary for EMI mitigation.

A high-temperature process allows up to 175 °C junction temperature for full power up to 125 °C operating temperature with no derating. Integrated short-circuit protection avoids excessive power dissipation.

Part Number:
ILDC11-15E
Quantity in Stock:
2

$5.43

12545: Holder for 8 mm dia. disk magnet

A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12545
Quantity in Stock:
3

$70.00

12546: Holder for 4 mm dia. disk magnet

A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12546
Quantity in Stock:
3

$70.00

AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator

A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".

Part Number:
AG921-07E
Quantity in Stock:
3

$90.00

AG935-07E: 60-LED "Blinky" AAT003 Angle Sensor Demo Board

This kit includes a 5-inch by 5-inch circuit board with an AAT003 Angle Sensor, 60 multicolor smart LEDs (6° spacing) to indicate rotation angle, and a preprogrammed, onboard ATtiny microcontroller. The microcontroller also provides a PWM angle output. The board is factory calibrated and can optionally be field calibration. A split-pole magnet, a magnet locating fixture, and a 5-volt wall mount power supply module are also included. The board comes preprogrammed, but the Arduino compatible software is available on Github/NveCorporation so you can use the routines in your own application.

Part Number:
AG935-07E
Quantity in Stock:
3

$150.00

AG953-07E: SM225-10E Smart TMR Magnetometer Evaluation Kit

The AG953-07 Evaluation Kit has everything you need to test and evaluate the easy-to-use SM225-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM225-10E sensor.
          - a microcontroller connected to the sensor via SPI.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A PWM board output for an analog representation of the measured magnetic field.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG953-07E
Quantity in Stock:
3

$95.00

Displaying 61 to 80 (of 379 products)