New Products
IL611-3-01: IL611-3E 2-Ch (both same dir) Passive-In Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL611-3E two-channel (both the same direction) SOIC8 passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
- Part Number:
- IL611-3-01
- Quantity in Stock:
- 50
$49.95
IL613-01: IL613E 3-Ch (all same dir) Passive-In Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL613E three-channel (all the same direction) passive isolator, input
resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
- Part Number:
- IL613-01
- Quantity in Stock:
- 50
$49.95
IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow
These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input
resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.
Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.
- Part Number:
- IL614-3-01
- Quantity in Stock:
- 50
$49.95
IL710S-1-01: 150 Mbps 1-Ch MSOP Isolator Eval Board
These 2 x 3.5-inch (50 x 90 mm) boards have an IL710S-1E 150 Mbps single-channel (all the same direction) ultraminiature MSOP8 isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest isolators.
- Part Number:
- IL710S-1-01
- Quantity in Stock:
- 50
$49.95
IL715-01: 4-Ch (all same dir) Wide-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715E four-channel (all the same direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL715-01
- Quantity in Stock:
- 50
$49.95
IL715-1-01: 4-Ch (all same dir) QSOP Isolator Eval Board
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-1E four-channel (all the same direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest high-performance isolators.
- Part Number:
- IL715-1-01
- Quantity in Stock:
- 50
$49.95
IL715-3-01: 4-Ch (all same dir) Narrow-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715-3E four-channel (all the same direction) narrow-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL715-3-01
- Quantity in Stock:
- 50
$49.95
IL715V-01: 4-Ch (all same dir) Wide-Body 7 kV Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL715VE isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
V-Series isolators are rated at a best-in-class 7 kVrms (9.9 kVpeak) isolation voltage. The evaluation board demonstrates best practice for maintaining 8 millimeter creepage. The isolators are conformally-coated to minimize arcing around the part.
- Part Number:
- IL715V-01
- Quantity in Stock:
- 50
$49.95
IL716-01: 4-Ch (2 ea dir) Wide-Body Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL716E four-channel (two each direction) wide-body isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's best isolators.
- Part Number:
- IL716-01
- Quantity in Stock:
- 50
$49.95
IL716-1-01: 4-Ch (2 ea dir) QSOP Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL716-1E four channel (two each direction) ultraminiature QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The boards let you evaluate the world's smallest high-performance isolators.
- Part Number:
- IL716-1-01
- Quantity in Stock:
- 50
$49.95
IL717-1-01: 4-Ch (3-xmt, 1-rcv) QSOP Isolator Eval Bd
These 2 x 3.5-inch (50 x 90 mm) boards have an IL717-1E ultraminiature four-channel (three transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.
The board lets you evaluate the world's smallest high-performance isolators.
- Part Number:
- IL717-1-01
- Quantity in Stock:
- 50
$49.95
AD724-00E: 2.8 mT Digital Switch, RoHS MSOP
NVE's AD724-00E GMR Switch integrates GMR sensor elements with digital onboard
signal processing electronics. The GMR Switch has less field sensing errors than
other magnetic sensors, and magnetic field operate points are stable over voltage
and temperature extremes. This enables high precision, tight-tolerance magnetic
sensing assemblies.
Features:
Regulated Voltage Output
Precision Magnetic Operate Point -- 28 Oersteds
Excellent Temperature and Voltage Performance
Digital Outputs
Frequency Response 0 to 250 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Pneumatic Cylinder Position Sensing
Speed Sensing
Supply
Voltage
min.-max.
Supply
Current
(mA)
min.-max.
Op. Point
(Oe)
min.-max.
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
4.5-30.0
2.5-4.5
21-34
5
0.4
Sink/
Sink/
Vreg
LBF
Cross axis
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
- Part Number:
- AD724-00E
- Quantity in Stock:
- 52
$4.89
IL611CMTI-1E: 2-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP
IL6xxCMTI-Series isolators are
optimized for driving MOSFETs either directly or with an
external gate driver.
Resistors set the input current, and five milliamps guarantees
switching. The inputs can be configured as non-inverting or
inverting.
CMTI-grade isolators are 100% tested to ensure each part has
at least 200 kV/µs minimum Common-Mode Transient
Immunity. Simple external deglitch circuitry can extend the
CMTI to an extraordinary 350 kV/µs typical.
The parts also have an extended supply range of up to 6.6 volts
for compatibility to directly drive a range of power
MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.
The IL611CMTI-1E is a two-channel version in an ultramniature MSOP8 package.
- Part Number:
- IL611CMTI-1E
- Quantity in Stock:
- 53
$6.24
AD320-00E: 2.8 mT Digital Switch, RoHS MSOP
NVE's AD320-00E GMR Switch integrates GMR sensor elements with digital onboard
signal processing electronics. The GMR Switch has less field sensing errors than
other magnetic sensors, and magnetic field operate points are stable over voltage
and temperature extremes. This enables high precision, tight-tolerance magnetic
sensing assemblies.
Features:
Precision Magnetic Operate Point -- 28 Oersteds
Excellent Temperature and Voltage Performance
Digital Outputs
Frequency Response 0 to 250 KHz
Small, Low Profile Surface Mount Packages
Applications:
General Digital Field Sensing
Pneumatic Cylinder Position Sensing
Speed Sensing
Supply
Voltage
min.-max.
Supply
Current
(mA)
min.-max.
Op. Point
(Oe)
min.-max.
Differ-
ential
(Oe)
min.
Output
Sat.
Voltage
max.
Output
Pkg. Mark
Orien-
tation
Pkg.
4.5-30.0
2.5-4.5
21-34
5
0.4
Current Sink
GBK
Std. axis
MSOP8
(RoHS)
Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.
- Part Number:
- AD320-00E
- Quantity in Stock:
- 54
$4.89
ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6
ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.
The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.
The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.
The sensor is factory calibrated, with coefficients stored in
internal memory.
A four-wire SPI interface provides angle data and allows
setting device parameters.
The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.
- Part Number:
- ASR002-10E
- Quantity in Stock:
- 56
$8.98
IL7616VE: 4-channel (2 each direction) Isolator w/3.3-3.3V DC-DC Convertor
The IL7616VE is a four-channel (two each direction) 110 Mbps isolator with an integrated 3.3V-to-3.3V isolated DC-DC convertor.
The DC-DC convertor can output up to 250 mW, is fully regulated, and has built-in EMI mitigation.
6 kVRMS isolation; 125 C; 16-pin wide-body SOIC package with True 8™ mm creepage.
- Part Number:
- IL7616VE
- Quantity in Stock:
- 57
$12.40
ALT023-10E-EVB01: 0-1 mT TMR magnetometor eval board
A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT023-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer.
The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.
The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.
- Part Number:
- ALT023-10E-EVB01
- Quantity in Stock:
- 60
$19.95
AHK991-14E: 350 mT, 1.5V, TMR Switch, ULLGA
The unique AHK991-14E is a high-field, low voltage, low power, TMR magnetic switch, designed for MRI detection in implantable medical devices.
The sensors have a 350 mT (3500 Oe) typical operate point, which is high enough to detect MRI fields or strong, rare-earth magnets in close proximity. Such high fields disrupt most other magnetic sensors.
The sensors can withstand unlimited fields without
being damaged or turning off.
Unlike Hall effect or other sensors, the switch is sensitive to magnetic fields in any direction.
Key Specifications:
350 mT operate point
0.9 to 1.8 V
2 µA typical supply current
3000 Hz switching speed
-40 to 85°C
- Part Number:
- AHK991-14E
- Quantity in Stock:
- 72
$17.05
IL814T-3E: 3-Channel (2 transmit, 1 receive) Top-of-the-Line Isolator, 2.5 kV, Narrow SOIC
The IL814T-3E is NVE's top-of-the-line three-channel bidirectional isolator, with best-in-class specifications:
• 125°C max. operating temperature
• 110 Mbps
• 10 ns propagation delay
• DC-correct; deterministic power-up
• 50 kV/µs typ.; 30 kV/µs min. transient immunity
• IEC 60747-5-5 (VDE 0884) certified—600 Vrms WV
• 44000-year barrier life
• Low EMC footprint
The part uses NVE's unique 16-pin narrow-body (0.15"-wide) SOIC package.
- Part Number:
- IL814T-3E
- Quantity in Stock:
- 72
$6.89
SM124-10E: General-Purpose 1 mT Smart GMR Magnetometer, TDFN6
The SM124-10E Smart Magnetometer combines an omnipolar GMR sensor element with
with easy-to-use digital signal processing.
A digital output provides precise, programmable thresholds.
An I²C interface provides magnetic field data, as well as a
calibration interface. The device is factory calibrated for accuracy. Calibration coefficients are stored in internal nonvolatile memory.
All commands, data, and coefficients are a single byte, and a
slick, elegant data structure lets you get up and running with
a minimum of firmware.
Key features include:
• Can detect magnets more than 50 mm away
• I²C and digital threshold outputs
• 0-1 mT linear range
• 8-bit / 1% output resolution
• −40°C to +125°C operating range
• 5% FS accuracy for 0 to 85°C
• 10 kSps sample rate for fast response
• 6 mA typical supply current
• In-plane sensitivity more usable than Hall effect sensors
• Programmable offset and gain compensation
• Optional magnet temperature compensation
• 2.2 to 3.6 volt supply
• Ultraminiature 2.5 x 2.5 x 0.8 mm TDFN package
- Part Number:
- SM124-10E
- Quantity in Stock:
- 73
$6.88
