New Products

Displaying 1 to 20 (of 363 products)
AA007-00E: 50 mT Sat. Analog Sensor, 5 KOhm, RoHS MSOP

The AA007-00E GMR Magnetic Field Sensors are used to sense relatively high fields. 0.1 mV/V/Oe Sensitivity; 500 Oe Saturation Field; MSOP8.
Note: Parts must be purchased in tube quantities (multiples of 100) when purchasing quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AA007-00E

$10.90

AAK001-14E: 400 mT Sat. High-Field Magnetometer, 3.5 KOhm, ULLGA

The AAK001-14E is a high-field magnetometer sensor that provides precise sensing of magnetic fields up to 4 kOe (400 mT). With a unique 1.1 mm x 1.1 mm package package, it is also our smallest analog sensor. Features: Precise sensing of magnetic fields up to 4 kOe (400 mT)
Sensitive to fields of any direction in the IC plane
Ratiometric Wheatstone bridge outputs
Any operating supply voltage up to 12V
Ultraminiature 1.1 x 1.1 mm package Applications: Brushless DC motors
Motor commutator sensors
Noncontact high-current measurement
Harsh industrial applications Note: Parts are sold in increments of 100 for quantities of 100 or more.
This part is RoHS compliant.

Part Number:
AAK001-14E

$11.52

AAT009-10E: Angle Sensor, 6 MOhm, TDFN6

AAT009-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for ultralow power, high output signal, and a wide airgap tolerance. Sine and cosine outputs provide full quadrature. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 6 MΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.

Part Number:
AAT009-10E

$5.50

ABL015-00E: 0.5 mm, 2-Bridge Analog Gear-Tooth Sensor, RoHS MSOP

NVE's ABL015-00E GMR sensor is an analog output sensor for gear tooth sensing or magnetic encoders. The differential sensor elements are spaced 0.5 mm apart on the sensor IC, and the two sensors are phase shifted by 0.25 mm. Bridge Resistance for Each Bridge (Ohms) Linear Range (Oersteds) Output Comments Package Dual Differential Sensor (Gradiometer); senses the magnetic field gradient across the sensor IC. Center-to-center distance between sensor elements is 0.500 mm, and phase shift from sensor to sensor is 0.250 mm. 4K - 7K +/-5 to +/-100 Dual Analog Bridge Gear Tooth or Encoder MSOP8 Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
ABL015-00E

$6.25

AD924-00: 2.8 mT Digital Switch, MSOP

AD924-00 Sensors are for use with external high-current output transistors in industrial control environments. The parts provide the same precise magnetic performance as NVE's GMR Digital Switches with the addition of output stage short circuit protection (SCP). The protection circuit shuts off the output stage if there is a short circuit, then turns it back on after a specified interval. The sensor, combined with external reverse battery and overvoltage protection, results in a "bulletproof" assembly. Features: Precision Magnetic Operate Point -- 28 Gauss Excellent Temperature and Voltage Performance Digital Outputs Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Pneumatic Cylinder Position Sensing Speed Sensing Supply
Voltage
min.-max. Supply
Current
(mA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 4.5-30.0 2.5-4.5 21-34 5 0.4 Sink/
Source/
Vreg/
SCP NBF Cross axis MSOP8
(Pb) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times.

Part Number:
AD924-00

$5.65

ADT002-10E: Low Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. An additional output indicates a fault if the magnetic field is too high. The ADT002 is low hysteresis to provide accurate, absolute rotational quadrant information. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT002-10E

$7.15

AET500-02E: 5 mm, Half-Bridge TMR Rotational / Linear Sensor, SOIC

AET500-02E sensors can be used with multipole ring magnets as rotary encoders or with magnetic scale tapes as linear motion sensors. High sensitivity allows for wide airgaps and accommodates mechanical tolerances.

The half-bridge configuration maximizes noise immunity and provides large 300 mVpp/V output signals. Sine and cosine outputs provide direction information.

Evaluation and Demonstration Kits are also available.

Part Number:
AET500-02E

$5.67

AG001-01E: GMR Analog Sensor Evaluation Kit

The AG001-01E GMR Analog Sensor Evaluation Kit is designed for experimentation and development. The kit contains an assortment of 14 NVE analog sensors plus several printed circuit boards and various permanent magnets. It includes the high-sensitivity AAH002 sensor. The kit contains only RoHS compliant parts.

Part Number:
AG001-01E

$60.00

AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board

This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040C

$16.95

AG903B-07E: 0.75A/5A/50A GMR Current Sensor Evaluation Kit

The evaluation board includes three sensor over current-trace modules with three AAL024-10E TDFN current sensors.

The board measures 1.565" x 2.915" (40 mm by 74 mm), and includes three separable modules. The three modules are optimized to measure currents of 0-0.75A, 0-5A, and 0-50A.

Part Number:
AG903B-07E

$75.00

AG920-07E: GT Sensor Evaluation Kit

The kit includes one of each of NVE's analog and digital GT Sensors, two DD001-12E signal processing ICs, and several circuit boards for fixturing and testing the sensors.

Part Number:
AG920-07E

$65.00

AG955-07E: Self-Contained SM12x Programmer

This self-contained module allows zeroing and programming the digital output threshold and hysteresis or SM124-10E or SM125-10E Smart Magnetometer without need of a computer or a customer microcontroller.

The 2.5" x 2.5" (64 mm x 64 mm) board has an I²C master microcontroller connected to the SM124.

A pushbutton for zeros the sensor, and miniature rotary thumbwheel switches provide three digits of resolution for the threshold and two for hysteresis. A custom TDFN-6 socket accommodates the 2.5 mm x 2.5 mm SM12x-10E. The module is powered by a small wall-mounted power supply (included).

Jumpers allow the sensor to be disconnected from the rest of the board so the board can be used as an interface to the customer’s electronics.

This module includes:

    • A 2.5 x 2.5 mm TDFN6 socket for a SM12x-10E Smart Magnetometer

    • A preprogrammed, onboard microcontroller

    • Two sets of thumbwheel switches for digital threshold and hysteresis

    • Two LEDs indicating the sensor’s output and successful programming

    • A 5-volt wall-mount power supply

Sensors are sold separately.

Part Number:
AG955-07E

$195.00

AG956-07E: ASR002-10E Smart SPI Angle Sensor Evaluation Kit

The AG956-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR002-10E Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR002-10E sensor
          - a diametrical magnet
          - magnet fixturing and a

    • An interface board with:
          - a microcontroller connected to the sensor via SPI
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG956-07E

$195.00

AG961-07E: SM125 Smart GMR Magnetometer breakout board w/connector

The AG961-07E provides easy connections to an SM125-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG961-07E

$24.95

AG965-07E: AET500-02E TMR Linear Sensor Demo Kit

The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor. The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB   • An AET500-02E 5 mm pole-pitch sensor
  • A four digit position display
  • Part #12592 5mm pole pitch magnetic tape
  • 3-D printed fixturing
  • LEDs for pole detected
  • Powered by three AAA batteries (included)

Part Number:
AG965-07E

$195.00

AG966-07E: ASR012 I2C/PWM Smart TMR Angle Sensor breakout board

The AG966-07E provides easy connections to an ASR012-10E I2C/PWM TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG966-07E

$19.95

AG970-07E: AET-Series TMR Linear Sensor Eval Kit

The AG970-07E Evaluation Kit helps test a variety AET-Series sensors with linear magnetic scales. The kit includes:   • All five AET-Series parts (unsoldered in tubes)
  • A 3 x 4-inch (76 x 101 mm) PCB with test points and screw terminals
  • Detachable fixturing for linear magnetic tape (tape sold separately)

Part Number:
AG970-07E

$65.00

AHL024-14E: 2.8 mT, 1.5V, 110 Hz Duty-Cycled GMR Switch, ULLGA

NVE's AHL024-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing and duty-cycling electronics. The Nanopower Switch is extremely small and extremely low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 95 nA Typical Supply Current 110 Hz Typical Update Frequency Digital Switch Output Integrated Duty-Cycle Operation Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL024-14E

$7.60

AHL924-14E: 2.8 mT, 1.5V, Nanopower GMR Switch, ULLGA

NVE's AHL924-14E Nanopower Switch integrates GMR sensor elements with digital onboard signal processing. The Nanopower Switch is extremely small and low power. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 35 Microamps Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHL924-14E

$7.60

AHT924-14E: 2.2 mT, 1.5V, Nanopower TMR Switch, ULLGA

AHT924-Series Nanopower Switches integrate TMR sensor elements with digital onboard signal processing. The ultralow power TMR element provides nanopower without duty cycling. Features: Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Low Voltage Operation to 0.9 V 1 microamp Typical Supply Current Digital Switch Output Applications: Battery-Powered Devices Portable Instruments

Part Number:
AHT924-14E

$8.36

Displaying 1 to 20 (of 363 products)