New Products

Displaying 1 to 20 (of 355 products)
12031: 0.312" Dia. x 0.125" Thick Disk Magnet

The 12031 is a 0.312" dia. x 0.125" thick Y25 ferrite disk magnet. Typical field strength is 900 Oe at the magnet face. This magnet is also included in our Analog Sensor Evaluation Kit.

Part Number:
12031
Quantity in Stock:
702

$0.99

12216: 6 mm Dia. x 4 mm Thick Disk Magnet

The 12216 magnet is a round, Y25 ferrite, 6 mm dia. x 4 mm thick disk magnet. Typical field strength is 1100 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.

Part Number:
12216
Quantity in Stock:
2661

$0.99

12217: 3.5 mm Dia. x 4 mm Thick Disk Magnet

The 12217 magnet is a round, 3.5 mm dia. x 4 mm thick Y25 ferrite disk magnet. Typical field strength is 1700 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.

Part Number:
12217
Quantity in Stock:
6499

$0.99

12526: 4 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

A diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12546 magnet holders.

Part Number:
12526
Quantity in Stock:
925

$0.99

12527: 8 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

The 12527 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12527
Quantity in Stock:
937

$1.19

12528: 8 mm Dia. x 8 mm Thick Diametrically-Magnetized Magnet

The 12528 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12528
Quantity in Stock:
913

$1.59

AG005-06: SOIC8 Printed Circuit Board (0.5" square)

The AG005-06 Printed Circuit Board is a 0.5 x 0.5 inch (13 x 13 mm) PCB with SOIC8 solder pads and through holes for wires or a connector. The PCB allows easy connections to AA-Series SOIC8 sensors (-02E suffix; order separately).

This PCB is also included in the AG001-01 Analog Sensor Evaluation Kit.

Part Number:
AG005-06
Quantity in Stock:
1047

$2.25

AG915-06: MSOP8 Printed Circuit Board (0.25" octagonal)

A 0.25-inch (6 mm) octagonal PCB for easy connections to MSOP8 sensors (-00E suffix; order sensors separately).

The PCB provides through holes for #28 or #30 wires.

Part Number:
AG915-06
Quantity in Stock:
545

$2.25

DC001-10E: 3.3V High-Temp Voltage Regulator

The DC001-10E 3.3 V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 3.3V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC001-10E
Quantity in Stock:
33470

$2.50

DC002-10E: 5V High-Temp Voltage Regulator

The DC001-10E 5V regulator is designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect the sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 175 degrees Celsius. The low profile, small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Features: Input voltage to 36VDC 5V Regulated Output Reverse Battery Protection Excellent immunity to Transients and ESD Small, Low Profile Surface Mount Packages Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is lead (Pb) free. Lead-free product information

Part Number:
DC002-10E
Quantity in Stock:
8184

$2.50

12249: 12.5 mm Dia. x 3.5 mm Diametrically-Magnetized Disk Magnet

A diametrically-magnetized for use with AAT- and ADT-Series angle sensors. The magnet material is C5/Y25 ferrite or similar.Typical field strength is 1000 Oe at the magnet face.

Part Number:
12249
Quantity in Stock:
1486

$2.85

IL610A-1E: 1-Channel Passive Input, Open-Drain Isolator, 1 kV, MSOP

The IL610A-1E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-1E
Quantity in Stock:
1018

$3.18

IL610A-2E: 1-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL610A-2E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain transistor output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-2E
Quantity in Stock:
735

$3.18

IL610A-3E: 1-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL610A-3E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-3E
Quantity in Stock:
2868

$3.18

12030: 0.125" x 0.25" x 0.5" Bar Magnet

The 12030 is a 0.125 x 0.25 x 0.5 inch miniature ferrite bar magnet. Typical field strength is 1500 Oe at the magnet face and forty oersteds one-half inch away.

This magnet is also included in several sensor evaluation kits, including our Analog Sensor Evaluation Kit and Sensor Demo Board.

Part Number:
12030
Quantity in Stock:
592

$3.25

IL510-1E: 1-Channel Isolator, 1 kV, MSOP

The IL510-1 is a 3.3V/5V, single-channel, 2 Mbps DC-correct digital isolator, with optional external synchronization clock, output enable, 25 ns propagation delay, 10 ns pulse width distortion with 1 kVrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. Unique 8-pin MSOP. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL510-1E
Quantity in Stock:
980

$3.29

IL510-3E: 1-Channel Isolator, 2.5 kV, SOIC8

The IL510-3 is a 3.3V/5V, single-channel, 2 Mbps DC-correct digital isolator, with optional external synchronization clock, output enable, 25 ns propagation delay, 10 ns pulse width distortion with 2500 Vrms isolation and 20 kV/microsecond transient immunity, -40°C to 85°C. 8-pin SOIC package. The "E" suffix indicates this part is lead (Pb) free.

Part Number:
IL510-3E
Quantity in Stock:
946

$3.29

IL41050TTE: Basic Isolated CAN Transceiver, 2.5 kV, Wide SOIC

The IL41050TT is a low-cost, basic CAN transceiver without Vref output and silent mode input pins. 2.5kV isolation; 125C; 180 ns typ. loop delay; ISO 11898 compliant; >110 node fanout; 1 Mbps; 3.3 V or 5.0 V input logic. 16-pin wide-body (0.3'') RoHS SOIC package with full 8 mm creepage.

Part Number:
IL41050TTE
Quantity in Stock:
517

$3.43

IL610-1E: 1-Channel Passive Input, CMOS-Output Isolator, 1 kV, MSOP

The IL610-1E is a 3.3/5V, single-channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-1E
Quantity in Stock:
1705

$3.49

IL610-2E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL610-2E is a 3.3/5V, single-channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-2E
Quantity in Stock:
9192

$3.49

Displaying 1 to 20 (of 355 products)