New Products

Displaying 101 to 120 (of 408 products)
AFL100-10E: 1 mT Digital Sw, 1.8 V – 2.5 V, Norm OFF Sinking, TDFN

NVE's AFL100-10E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds (1 mT) Low Power Digital Output Ultraminiature 2.5 mm x 2.5 mm TDFN Package Note: Parts must be purchased in multiples of 100 for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL100-10E
Quantity in Stock:
2132

$9.25

AFL200-00E: 1 mT Digital Switch, 2.7 V – 3.6 V, Norm OFF Sinking

NVE's AFL200-00E low power switch sensor integrates GMR sensor elements with digital onboard signal processing electronics. The switch is designed for use in low power and battery applications, and features supply voltages down to 2.7 Volts and continuous operation at currents of 20-55 microamps. Like all NVE magnetic sensors, the AFL sensors have extremely precise magnetic operate and release points. Features: Precision Magnetic Operate Point -- 10 Oersteds Normally OFF Current Sinking Digital Output Frequency Response 0 to 250 KHz Small, Low Profile Surface Mount Packages Applications: General Digital Field Sensing Low Power Applications Low Field Applications Supply
Voltage
min.-max. Supply
Current
(µA)
min.-max. Op. Point
(Oe)
min.-max. Differ-
ential
(Oe)
min. Output
Sat.
Voltage
max. Output Pkg. Mark Orien-
tation Pkg. 2.7-3.6 20-55 7-13 1 0.4 Current Sink PBGe Cross axis MSOP8
(RoHS) Note: Parts must be purchased in tube quantities (multiples of 100) for quantities of 100 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AFL200-00E

$9.25

AG001-01E: GMR Analog Sensor Evaluation Kit

The AG001-01E GMR Analog Sensor Evaluation Kit is designed for experimentation and development. The kit contains an assortment of 14 NVE analog sensors plus several printed circuit boards and various permanent magnets. It includes the high-sensitivity AAH002 sensor. The kit contains only RoHS compliant parts.

Part Number:
AG001-01E
Quantity in Stock:
2

$60.00

AG004-06: SOIC8 Printed Circuit Board (3" x 0.3")

A 3 x 0.3 inch (76 x 8 mm) PCB to demonstrate AA-Series SOIC sensors (-02E suffix; order sensors separately).

This PCB is also included in the AG001-01 Sensor Evaluation Kit.

Part Number:
AG004-06
Quantity in Stock:
1317

$4.25

AG005-06: SOIC8 Printed Circuit Board (0.5" square)

The AG005-06 Printed Circuit Board is a 0.5 x 0.5 inch (13 x 13 mm) PCB with SOIC8 solder pads and through holes for wires or a connector. The PCB allows easy connections to AA-Series SOIC8 sensors (-02E suffix; order separately).

This PCB is also included in the AG001-01 Analog Sensor Evaluation Kit.

Part Number:
AG005-06
Quantity in Stock:
632

$2.25

AG035-06: TDFN6 Printed Circuit Board

The AG035-06 Printed Circuit Board (PCB) is a 1.57 x 0.25 inch (40 x 6 mm) PCB for connection to 2.5 x 2.5 mm TDFN6 sensors (-10E suffix sensors; order sensors separately).

Part Number:
AG035-06
Quantity in Stock:
793

$4.25

AG039-06: ULLGA Digital Sensor Demonstration Bare Board

A 1.57 x 0.25 inch PCB for demonstrating ADLxxx-14E/AHLxxx-14E 1.1 x 1.1 mm ULLGA4 digital sensors (order sensors separately). In addition to space for the sensor, the boards have locations for 0402-size pull-up resistors and bypass capacitors.

Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.

Part Number:
AG039-06
Quantity in Stock:
466

$5.00

AG040B: ADL021 Battery-Powered Nanopower Sensor Demonstration Board

This kit includes a demo board with the ultraminiature, ultralow-power ADL021 magnetic switch. An LED shows the sensor output. The board is powered by a three-volt lithium coin cell (included), and the sensor quiescent power consumption is so low that the battery will last indefinitely. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Sensor quiescent current is only 100 nA typical; the sensor operate point is 20 Oe; and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040B
Quantity in Stock:
31

$19.95

AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board

This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040C
Quantity in Stock:
27

$16.95

AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board

The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040T

$19.95

AG903B-07E: 0.75A/5A/50A GMR Current Sensor Evaluation Kit

The evaluation board includes three sensor over current-trace modules with three AAL024-10E TDFN current sensors.

The board measures 1.565" x 2.915" (40 mm by 74 mm), and includes three separable modules. The three modules are optimized to measure currents of 0-0.75A, 0-5A, and 0-50A.

Part Number:
AG903B-07E
Quantity in Stock:
2

$75.00

AG904-06: ULLGA General-Purpose PCB

A 1.2 x 0.25 inch x 0.031 inch thick (30 x 6 x 0.75 mm) PCB for demonstrating 1.1 x 1.1 mm ULLGA4 sensors (-14E sensor suffix; order sensors separately).

Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.

Part Number:
AG904-06
Quantity in Stock:
237

$5.00

AG905-07E: ALT025 High Current PCB Demonstration

This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output.

Part Number:
AG905-07E

$75.00

AG910-07E: GMR Switch Evaluation Kit w/ZIF socket

AG910-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. Magnets, circuit boards for mounting the parts, and a zero insertion force (ZIF) socket are also included.

Part Number:
AG910-07E
Quantity in Stock:
10

$90.00

AG911-07E: GMR Switch Evaluation Kit

AG911-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. A magnet and circuit boards for mounting the parts are included.

Part Number:
AG911-07E
Quantity in Stock:
11

$65.00

AG915-06: MSOP8 Printed Circuit Board (0.25" octagonal)

A 0.25-inch (6 mm) octagonal PCB for easy connections to MSOP8 sensors (-00E suffix; order sensors separately).

The PCB provides through holes for #28 or #30 wires.

Part Number:
AG915-06
Quantity in Stock:
822

$2.25

AG918-06: MSOP8 Printed Circuit Board (2" x 0.25")

A 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; purchase sensors separately).

This PCB is also included in the AG910-07 and AG911-07 Sensor Evaluation Kits.

Part Number:
AG918-06
Quantity in Stock:
557

$4.25

AG919-06: MSOP8 PCB (2" x 0.25"; cross-axis orientation)

The AG919-06 is a 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; order sensors separately). The MSOP8 is rotated 90 degrees compared to the AG918-06.

Part Number:
AG919-06
Quantity in Stock:
6

$4.25

AG920-07E: GT Sensor Evaluation Kit

The kit includes one of each of NVE's analog and digital GT Sensors, two DD001-12E signal processing ICs, and several circuit boards for fixturing and testing the sensors.

Part Number:
AG920-07E
Quantity in Stock:
8

$65.00

AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator

A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".

Part Number:
AG921-07E

$90.00

Displaying 101 to 120 (of 408 products)