New Products

Displaying 1 to 20 (of 441 products)
12030: 0.125" x 0.25" x 0.5" Bar Magnet

The 12030 is a 0.125 x 0.25 x 0.5 inch miniature ferrite bar magnet. Typical field strength is 1500 Oe at the magnet face and forty oersteds one-half inch away.

This magnet is also included in several sensor evaluation kits, including our Analog Sensor Evaluation Kit and Sensor Demo Board.

Part Number:
12030
Quantity in Stock:
2989

$3.25

12031: 0.312" Dia. x 0.125" Thick Disk Magnet

The 12031 is a 0.312" dia. x 0.125" thick Y25 ferrite disk magnet. Typical field strength is 900 Oe at the magnet face. This magnet is also included in our Analog Sensor Evaluation Kit.

Part Number:
12031
Quantity in Stock:
464

$0.99

12032: 1.0" x 0.125" x 0.39" Bar Magnet

The 12032 is a 1.0" long x 0.125" wide x 0.39" thick Y25 ferrite bar magnet. Typical field strength is 1800 Oe at the magnet face. This magnet is also included in the AG910-07 and AG911-07 GMR Switch Evaluation Kits.

Part Number:
12032
Quantity in Stock:
86

$4.25

12216: 6 mm Dia. x 4 mm Thick Disk Magnet

The 12216 magnet is a round, Y25 ferrite, 6 mm dia. x 4 mm thick disk magnet. Typical field strength is 1100 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.

Part Number:
12216
Quantity in Stock:
1346

$0.99

12217: 3.5 mm Dia. x 4 mm Thick Disk Magnet

The 12217 magnet is a round, 3.5 mm dia. x 4 mm thick Y25 ferrite disk magnet. Typical field strength is 1700 Oe at the magnet face. This magnet is also included in the AG920-07 Gear Tooth Sensor Evaluation Kit.

Part Number:
12217
Quantity in Stock:
4386

$0.99

12249: 12.5 mm Dia. x 3.5 mm Diametrically-Magnetized Disk Magnet

A diametrically-magnetized for use with AAT- and ADT-Series angle sensors. The magnet material is C5/Y25 ferrite or similar.Typical field strength is 1000 Oe at the magnet face.

Part Number:
12249
Quantity in Stock:
1475

$2.85

12426: Split-Pole Round Horseshoe Magnet

The 12426 is a split-pole Alnico-5 round horseshoe magnet, ideal for use with AAT-Series angle sensors.

The magnet is 11 mm diameter by 11 mm tall, with a 3.7 mm hole through the center for a variety of mounting options.


Typical field strength is 1100 Oe at the magnet face and thirty oersteds 12mm away. This magnet's strength allows a large airgap between the magnet and the sensor.

This magnet is included in our angle sensor evaluation kits.

Part Number:
12426
Quantity in Stock:
626

$8.95

12526: 4 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

A diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12546 magnet holders.

Part Number:
12526
Quantity in Stock:
885

$0.99

12527: 8 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

The 12527 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12527
Quantity in Stock:
923

$1.19

12528: 8 mm Dia. x 8 mm Thick Diametrically-Magnetized Magnet

The 12528 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12528
Quantity in Stock:
903

$1.19

12545: Holder for 8 mm dia. disk magnet

A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12545
Quantity in Stock:
3

$70.00

12546: Holder for 4 mm dia. disk magnet

A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12546
Quantity in Stock:
3

$70.00

12589: 0.5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET050F-00E 0.5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12589
Quantity in Stock:
2

$30.00

12590: 1 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET100F-00E 1 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12590

$30.00

12591: 2 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET200-00E 2 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12591

$30.00

12592: 5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET500-00E 5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12592

$30.00

AA002-02E-EVB01: 1 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA002-02E 0.15 to 1.05 mT GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA002-02E-EVB01
Quantity in Stock:
100

$19.95

AA002-02E: 1.5 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA002-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 15 3.0 - 4.2 Analog Bridge Low-Field Measurement SOIC8 (RoHS) Note: Parts must be purchased in tube multiples (increments of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA002-02E
Quantity in Stock:
7124

$9.60

AA003-02E-EVB01: 2 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA003-02E 2 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA003-02E-EVB01
Quantity in Stock:
49

$19.95

AA003-02E: 2 mT Sat. Analog Sensor, 5 KOhm, RoHS SOIC

NVE's AA003-02E Normalized Output GMR Magnetic Field Sensors have a unique ability to sense static fields and offer unmatched magnetic sensitivity. General purpose magnetometer --
senses fields from permanent magnets, earth, and current sources. Typ. Min. Saturation Field (Oe) Sensitivity (mV/V/Oe) Output Comments Package 20 2.0 - 3.2 Analog Bridge Low-Field Measurement SOIC8 (RoHS) Note: Parts must be purchased in tube multiples (increments of 92) when purchasing quantities of 92 or more. Larger quantities are subject to NVE's standard lead times. This part is RoHS compliant.

Part Number:
AA003-02E
Quantity in Stock:
8566

$9.60

Displaying 1 to 20 (of 441 products)