New Products

Displaying 101 to 120 (of 363 products)
IL612A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL612A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612A-3E
Quantity in Stock:
4825

$5.43

IL612A-2E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL612A-2E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain transistor outputs, which can be used to replace optocouplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop GMR Sensor technology giving exceptionally small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin DIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612A-2E
Quantity in Stock:
524

$5.43

IL612-3E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL612-3E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace optocouplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptionally small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612-3E
Quantity in Stock:
2702

$5.67

IL612-2E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL612-2E is a 3.3/5V, dual channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace optocouplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop GMR technology giving exceptionally small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin DIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL612-2E
Quantity in Stock:
2811

$5.67

IL611CMTI-1E: 2-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL611CMTI-1E is a two-channel version in an ultramniature MSOP8 package.

Part Number:
IL611CMTI-1E
Quantity in Stock:
91

$6.23

IL611A-3E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL611A-3E is a 3.3/5V, dual-channel, 10 Mbps isolated signal coupler with open-drain outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-3E
Quantity in Stock:
982

$5.43

IL611A-2E: 2-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL611A-2E is a 3.3/5V, dual channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-2E
Quantity in Stock:
802

$5.43

IL611A-1E: 2-Channel Passive Input, Open-Drain Isolator, 1 kV, MSOP

The IL611A-1E is a 3.3/5V, dual channel, 10 Mbps isolated signal coupler with open-drain outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611A-1E
Quantity in Stock:
1958

$5.43

IL611-3E: 2-Channel Passive-Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL611-3E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-3E
Quantity in Stock:
6614

$5.67

IL611-2E: 2-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL611-2E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-2E
Quantity in Stock:
4131

$5.67

IL611-1E: 2-Channel Passive Input, CMOS-Output Isolator, 1 kV, MSOP

The IL611-2E is a 3.3/5V, dual-channel, 100 Mbps isolated signal coupler with CMOS outputs, which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged couplers). This part is lead (Pb) free. Lead-free product information

Part Number:
IL611-1E
Quantity in Stock:
190

$5.67

IL610CMTI-3E: 1-Channel Ultrahigh CMTI Isolator, 2.5 kV, SOIC8

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL610CMTI-3E is a single-channel version in a SOIC8 package.

Part Number:
IL610CMTI-3E
Quantity in Stock:
1532

$3.84

IL610CMTI-1E: 1-Channel Ultrahigh CMTI Isolator, 2.5 kV, MSOP

IL6xxCMTI-Series isolators are optimized for driving MOSFETs either directly or with an external gate driver. Resistors set the input current, and five milliamps guarantees switching. The inputs can be configured as non-inverting or inverting.

CMTI-grade isolators are 100% tested to ensure each part has at least 200 kV/µs minimum Common-Mode Transient Immunity. Simple external deglitch circuitry can extend the CMTI to an extraordinary 350 kV/µs typical.

The parts also have an extended supply range of up to 6.6 volts for compatibility to directly drive a range of power MOSFETs or gate driver ICs. The parts provide full 2.5 kV isolation.

The IL610CMTI-1E is a single-channel version in an ultraminiature MSOP8 package.

Part Number:
IL610CMTI-1E
Quantity in Stock:
717

$3.84

IL610A-3E: 1-Channel Passive Input, Open-Drain Isolator, 2.5 kV, SOIC8

The IL610A-3E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-3E
Quantity in Stock:
1658

$3.18

IL610A-2E: 1-Channel Passive Input, Open-Drain Isolator, 2.5 kV, PDIP

The IL610A-2E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain transistor output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-2E
Quantity in Stock:
735

$3.18

IL610A-1E: 1-Channel Passive Input, Open-Drain Isolator, 1 kV, MSOP

The IL610A-1E is a 3.3/5V, single-channel, 10 Mbps isolated signal coupler with an open-drain output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610A-1E
Quantity in Stock:
108

$3.18

IL610-3E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, SOIC8

The IL610-3E is a 3.3/5V, single channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin SOIC package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-3E
Quantity in Stock:
2576

$3.49

IL610-2E: 1-Channel Passive Input, CMOS-Output Isolator, 2.5 kV, PDIP

The IL610-2E is a 3.3/5V, single-channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin PDIP package. This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-2E
Quantity in Stock:
7392

$3.49

IL610-1E: 1-Channel Passive Input, CMOS-Output Isolator, 1 kV, MSOP

The IL610-1E is a 3.3/5V, single-channel, 100 Mbps isolated signal coupler with a CMOS output, which can be used to replace opto-couplers in many standard isolation functions. The device is manufactured with NVE's IsoLoop spintronic GMR technology giving exceptional small size and low power dissipation. The passive input structure allows direct interface to a very wide range of voltage inputs. A single resistor is used to set maximum current for input voltages above 0.5 V. 20 kV/microsecond transient immunity. 8-pin MSOP package (the world's smallest packaged coupler). This part is lead (Pb) free. Lead-free product information

Part Number:
IL610-1E
Quantity in Stock:
3821

$3.49

IL600-01: IL600-Series Isolator Evaluation Board

The IL600-Series Isolator evaluation board lets you try a variety of NVE’s unique passive-input isolators.

The board has four IL600-Series isolators in four package types:
• IL613E (wide-body SOIC-16)
• IL614-3E (narrow-body SOIC-16)
• IL611-3E (SOIC-8)
• Open-drain IL610A-1E (MSOP-8)

A pushbutton and LED demonstrates the unmatched flexibility of these devices.

The award-winning IL600 and IL600A Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density.

Part Number:
IL600-01
Quantity in Stock:
10

$49.95

Displaying 101 to 120 (of 363 products)