The AG954-07E provides a socket for easy programming and prototyping of TDFN6 devices without soldering and unsoldering.
The custom socket is compatible with NVE's 2.5 mm x 2.5 mm TDFN6 package parts (-10E suffixes).
The board is 1.5" x 2" (38 mm x 50 mm), and uses brass hardware to minimize magnetic interference with the socketed sensor.
A 0.1"-spaced header provides for connections to the sensors, and a row of 0.1"-spaced through-holes allows for auxiliary parts such as a decoupling capacitor or an LED.
A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).
Compatible with
AG93x-Series
and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.
Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.
A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).
Compatible with
AG93x-Series
and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.
Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.
The AG919-06 is a 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; order sensors separately). The MSOP8 is rotated 90 degrees compared to the AG918-06.
The AG957-06E provides easy connections to an ASR-Series Smart Angle Sensor (sensors sold separately). In addition a spot for the sensor, the board has a spot for a bypass capacitor and a header to connected to the sensor I/O pads.
The board is approximately 0.5 by 0.6 inches (12 x 15 mm).
The 12032 is a 1.0" long x 0.125" wide x 0.39" thick Y25 ferrite bar magnet. Typical
field strength is 1800 Oe at the magnet face.
This magnet is also included in the AG910-07
and AG911-07
GMR Switch Evaluation Kits.
A 1.2 x 0.25 inch x 0.031 inch thick (30 x 6 x 0.75 mm) PCB for demonstrating 1.1 x 1.1 mm DFN4/ULLGA sensors (-14E sensor suffix; order sensors separately).
Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.
The 12031 is a 0.312" dia. x 0.125" thick Y25 ferrite disk magnet. Typical field strength is 900 Oe at the magnet face.
This magnet is also included in our Analog
Sensor Evaluation Kit.
A 1.57 x 0.25 inch PCB for demonstrating 1.1 x 1.1 mm DFN4/ULLGA sensors such as AHLxxx-14E, ADLxxx-14E, and ALT0xx-14E, (order sensors separately). In addition to space for the sensor, the boards have locations for 0402-size pull-up resistors and bypass capacitors.
Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.
The 12426 is a split-pole Alnico-5 round horseshoe magnet, ideal for use with
AAT-Series angle sensors.
The magnet is 11 mm diameter by 11 mm tall, with a 3.7 mm hole
through the center for a variety of mounting options.
Typical field strength is 1100 Oe at the magnet face and thirty oersteds 12mm away. This magnet's strength allows a large airgap between the magnet and the sensor.
This magnet is included in our angle sensor evaluation kits.
The AG005-06 Printed Circuit Board is a 0.5 x 0.5 inch (13 x 13 mm) PCB with SOIC8 solder pads and through holes for wires or a connector. The PCB allows easy connections to AA-Series SOIC8 sensors (-02E suffix; order separately).
This PCB is also included in the AG001-01 Analog Sensor Evaluation Kit.
The AG035-06 Printed Circuit Board (PCB) is a 1.57 x 0.25 inch (40 x 6 mm) PCB for connection to 2.5 x 2.5 mm TDFN6 sensors (-10E suffix sensors; order sensors separately).
The 12216 magnet is a round, Y25 ferrite, 6 mm dia. x 4 mm thick disk magnet. Typical field strength is 1100 Oe at the magnet face.
This magnet is also included in the AG920-07
Gear Tooth Sensor Evaluation Kit.
A diametrically-magnetized for use with AAT- and ADT-Series angle sensors. The magnet material is C5/Y25 ferrite or similar.Typical field strength is 1000 Oe at the magnet face.
The 12030 is a 0.125 x 0.25 x 0.5 inch miniature ferrite bar magnet. Typical
field strength is 1500 Oe at the magnet face and forty oersteds one-half inch
away.
This magnet is also included in several sensor evaluation kits, including our Analog
Sensor Evaluation Kit and Sensor
Demo Board.
The 12217 magnet is a round, 3.5 mm dia. x 4 mm thick Y25 ferrite disk magnet. Typical field strength is 1700 Oe at the magnet face.
This magnet is also included in the AG920-07
Gear Tooth Sensor Evaluation Kit.