Isolator Eval Boards

Displaying 1 to 20 (of 37 products)
IL260-1-01: 5-Ch (all same dir) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL260-1E ultraminiature five-channel (all the same direction) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL260-1-01
Quantity in Stock:
50

$49.95

IL261-1-01: 5-Ch (4-xmt, 1-rcv) QSOP Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL261-1E ultraminiature five-channel (four transmit, one receive) QSOP isolator, two bypass capacitors as recommended, screw connections, test pads, and provisions for header pins.

The board lets you evaluate the world's smallest high-performance isolators.

Part Number:
IL261-1-01
Quantity in Stock:
50

$49.95

IL3085-1-01: RS-485 QSOP Isolator Evaluation Board

The RS-485 QSOP Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the world's isolated transceiver, the IL3085-1E. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3085-1-01
Quantity in Stock:
3

$74.95

IL3585-01: RS-485 Wide-Body Isolator Evaluation Board

The RS-485 Wide-Body Isolator Evaluation Board provides a complete isolated RS-485 node using the popular 0.3" (8 mm) creepage IL3585E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3585-01
Quantity in Stock:
4

$74.95

IL3585-3-01: RS-485 Narrow-Body Isolator Evaluation Board

The RS-485 Narrow-Body Isolated Transceiver Evaluation Board provides a complete isolated RS-485 node using the unique 0.15"-wide IL3585-3E isolated transceiver. The board provides screw terminal and RJ45 connections, and demonstrates best layout practices.

Termination, pull-up, and pull-down resistors are easily changed to accommodate various fanouts and termination methods.

The transceiver delivers an exceptional 2.3 V differential output into a 54 Ohm load and data rates to 40 Mbps. The device is also compatible with 3.3 V input supplies, allowing interface to standard microcontrollers without additional level shifting.

Isolating RS-485 nodes reduces noise, eliminates ground loops, and improves safety.

Part Number:
IL3585-3-01
Quantity in Stock:
10

$74.95

IL3685-3-01: PROFIBUS Isolator Evaluation Board

The PROFIBUS Isolated Transceiver Evaluation Board provides a complete isolated PROFIBUS node using the unique 0.15" narrow-body IL3685-3E isolated transceiver. The board provides screw terminal and PROFIBUS DB9 connections.

Termination, pull-up, and pull-down resistors are typical PROFIBUS values, and easily changed for specific applications.

The transceiver provides data rates to 40 Mbps, and is fully PROFIBUS compatible, including the stringent bus differential specifications.

Part Number:
IL3685-3-01
Quantity in Stock:
10

$74.95

IL3685T-01: 40Mbps, 125C Isolated Xcvr Eval Bd, Wide SOIC

These 2 x 3.5-inch (50 x 90 mm) boards include an IL3685TE isolated RS-485 transceiver, a termination resistors, power-supply bypass capacitors as recommended, screw connections, provisions for header pins, and a DB9 bus connector for PROFIBUS.

The IL3685TE is the world's fastest isolated transceiver with data rates to 40 Mbps, is fully PROFIBUS compatible, including the stringent bus differential specifications, and is rated to a full 125C.

Part Number:
IL3685T-01
Quantity in Stock:
50

$49.95

IL41050-01: Narrow-Body Isolated CAN Evaluation Board

The CAN Evaluation Board provides a complete isolated Controller Area Network node using the popular IL41050TA-3E isolated narrow-body isolated CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050-01
Quantity in Stock:
9

$49.95

IL41050-1-01: QSOP Isolated CAN Evaluation Board

The QSOP isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using the world's smallest isolated CAN transceiver, the IL41050TA-1E.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050-1-01

$49.95

IL41050TFD-1-01: QSOP Isolated CAN FD Evaluation Board

The isolated CAN FD Evaluation Board provides a complete isolated Controller Area Network node using the world's smallest isolated CAN FD transceiver, the IL41050TFD-1E.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, pull-up resistors, and a jumper to select normal or silent mode.

Part Number:
IL41050TFD-1-01
Quantity in Stock:
11

$49.95

IL41050TT-01: Low-Cost Isolated CAN Evaluation Board

This board provides a complete isolated Controller Area Network node using NVE's IL41050TTE isolated wide-body basic CAN transceiver.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050TT-01
Quantity in Stock:
10

$49.95

IL41050WB-01: Isolated Wide-Body CAN Evaluation Board

The isolated CAN Evaluation Board provides a complete isolated Controller Area Network node using NVE's popular IL41050TAE isolated wide-body CAN transceiver with true 8mm creepage.

The board is fully ISO 11898 CAN compliant and accommodates 3V - 5.5V supplies. It provides screw terminal connections, termination resistors, and pull-up resistors.

Part Number:
IL41050WB-01
Quantity in Stock:
4

$49.95

IL4622-01: Isolated RS-485/RS-422 Xcvr w/DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 / RS-422 node using the IL4622E isolated transceiver with integrated isolated DC-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4622E is a high-speed, fully-isolated, full duplex differential bus transceiver with an integrated 3.3-to-3.3 volt DC-DC convertor to provide a fully-isolated 3.3 volt bus supply using the controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4622-01

$84.95

IL4685-01: Isolated RS-485 Xcvr w/3 V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4685E isolated transceiver with integrated isolated DC-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4685E is a high-speed, fully-isolated, half-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 3.3 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4685-01
Quantity in Stock:
100

$84.95

IL4822-01: Isolated RS-485 Xcvr w/5V bus DC-DC Conv Eval Bd

This Evaluation Board is a complete isolated RS-485 node using the IL4822E isolated transceiver with integrated DC-to-DC convertor.

These 2 x 3.5-inch (50 x 90 mm) boards include screw terminals and test pads. LEDs indicate DC-to-DC convertor input and output power. A 2s2p board with vias optimizes thermal performance.

The IL4822E is a high-speed, fully-isolated, full-duplex differential bus transceiver with an integrated DC-to-DC convertor to create an isolated 5 volt bus supply using the 3.3 volt controller supply. This level of integration dramatically reduces chip count and board area.

Part Number:
IL4822-01
Quantity in Stock:
50

$84.95

IL600-01: IL600-Series Isolator Evaluation Board

The IL600-Series Isolator evaluation board lets you try a variety of NVE’s unique passive-input isolators.

The board has four IL600-Series isolators in four package types:
• IL613E (wide-body SOIC-16)
• IL614-3E (narrow-body SOIC-16)
• IL611-3E (SOIC-8)
• Open-drain IL610A-1E (MSOP-8)

A pushbutton and LED demonstrates the unmatched flexibility of these devices.

The award-winning IL600 and IL600A Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density.

Part Number:
IL600-01
Quantity in Stock:
4

$49.95

IL610A-1-01: IL610A Passive-In Isolator Eval Board

The 2 x 3.5-inch (50 x 90 mm) boards contains the unique IL610A-1E passive-input, open-drain isolator. A pushbutton and LED demonstrate the remarkable flexibility of this devices. The evaluation board also has an input resistor, input capacitor, power-supply bypass capacitor as recommended, as well as screw connections, test points, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique flexibility similar to LED-input optocouplers but with better performance and higher package density. The MSOP package is the world's smallest isolator.

The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL610A-1-01
Quantity in Stock:
4

$49.95

IL611-3-01: IL611-3E 2-Ch (both same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL611-3E two-channel (both the same direction) SOIC8 passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL611-3-01
Quantity in Stock:
50

$49.95

IL613-01: IL613E 3-Ch (all same dir) Passive-In Isolator Eval Bd

These 2 x 3.5-inch (50 x 90 mm) boards have an IL613E three-channel (all the same direction) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL613-01
Quantity in Stock:
50

$49.95

IL614-3-01: IL614-3E 3-Ch (2 xmt, 1-rcv) Passive-In Isolator Eval Bd, Narrow

These 2 x 3.5-inch (50 x 90 mm) boards have an IL614-3E three-channel (two transmit, one receive) passive isolator, input resistors and capacitors, a power-supply bypass capacitor as recommended, screw connections, and provisions for header pins.

Award-winning IL600-Series Isolators provide unique passive inputs for flexibility similar to LED-input optocouplers but with better performance and higher package density. The devices are manufactured with NVE’s patented IsoLoop spintronic Giant Magnetoresistive (GMR) technology for small size, high speed, and low power.

Part Number:
IL614-3-01
Quantity in Stock:
50

$49.95

Displaying 1 to 20 (of 37 products)