Angle Sensors

Displaying 1 to 11 (of 11 products)
AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6

AAT001-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and very high device resistance for extremely low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 1.25 MΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
AAT001-10E
Quantity in Stock:
195907

$8.94

AAT003-10E: Angle Sensor, 40 kOhm, TDFN6

AAT003-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and low power. Sine and cosine outputs provide full quadrature. The sensor has a 40 kilohm device resistance and 20 kilohm output impedance, which is ideal for direct interface to microcontrollers. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 40 kΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.

Part Number:
AAT003-10E
Quantity in Stock:
4185

$8.94

AAT006-10E: Low-Field Angle Sensor, TDFN6

AAT006-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for operation at magnetic fields as low as 15 Oe, allowing an extremely wide airgap tolerance. The device has a large output without amplification, and high device resistance for low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package  200 mV/V  15 Oe 0.5 degrees 125°C 1.25 MΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426.

Part Number:
AAT006-10E

$8.94

AAT009-10E: Angle Sensor, 6 MOhm, TDFN6

AAT009-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology for ultralow power, high output signal, and a wide airgap tolerance. Sine and cosine outputs provide full quadrature. The AAT009-10E version has the highest device resistance in the AAT product family (6 megaohms typ.), for the lowest power consumption.

Key specifications are as follows:
TMR Angle Sensor Typ. p-p
Signal Min. Applied
Field (Oe) Max. Angular
Error (const. field) Max. Op.
Temp. Typ. Device
Resistance Package 200 mV/V 30 Oe 0.5 degrees 125°C 6 MΩ TDFN6
The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426.

An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture.

Part Number:
AAT009-10E
Quantity in Stock:
3869

$8.94

AAT101-10E: Full-Bridge Angle Sensor, 625 kOhm, TDFN6

AAT101-10E Angle Sensors use a Tunneling Magnetoresistance (TMR) full-bridges to produce a very high output signal without amplification. The sensors also have a wide airgap tolerance and high device resistance for low power. Sine and cosine outputs provide full quadrature. Key specifications are as follows: Full-Bridge TMR Angle Sensor Typ. p-p
Signal  Configuration   Min. Applied 
Field  Nonsinusoidality 
accuracy  Max. Op. 
Temp.  Typ. Device 
Resistance  Package   400 mV/V  Full bridge 30 Oe 1.5% 125°C 625 kΩ TDFN6 The angle sensors are typically used with a split pole magnets such as NVE part no. 12249 or 12426. An Evaluation Kit is available with an angle sensor, circuit board, unity-gain buffer amplifier, split-pole magnet, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
AAT101-10E
Quantity in Stock:
8880

$8.94

ADT002-10E: Low Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT002-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information. The ADT002 is lower hysteresis than the ADT005 to provide accurate, absolute rotational quadrant information. The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size. The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT002-10E
Quantity in Stock:
43536

$11.18

ADT005-10E: High Hysteresis, Ultralow Power Rotation Quadrant Sensor, TDFN6

ADT005-10E Rotation Sensors provide two binary digital outputs to accurately indicate the absolute rotational quadrant of a rotating magnet. The two outputs are 90 degrees out of phase to also provide directional information.

The ADT005 is higher hysteresis than the ADT002 for high noise immunity in applications such as speed sensing and counting rotations or where motion is in only one direction.

To minimize power, the ADT005 does not include the high-field detection circuitry included in the ADT001 version, and is slightly less accurate due to lower-power circuitry.

The sensors use NVE’s unique Tunneling Magnetoresistance (TMR) technology to minimize power consumption and size.

The sensors are typically used with radially-magnetized disk magnets or split pole magnet. An Evaluation Kit is available with an angle sensor, magnet, circuit board with indicator LEDs, and a plastic magnet locating fixture. Note: Please purchase in increments of 100 when purchasing quantities of 100 or more.

Part Number:
ADT005-10E
Quantity in Stock:
100

$11.18

ALT521-10E: Ultrasensitive Two-Axis Rotational Sensor, TDFN6

ALT521-10E Rotational Sensors are Tunneling Magnetoresistance (TMR) Wheatstone bridge sensors with large voltage signal, wide linear range, and ultraminiature package size. The sensor has two half-bridge outputs for absolute angle detection or both X- and Y-axis magnetic field detection. The outputs are bipolar, meaning they are positive for a positive field and negative for a negative magnetic field polarity. Key specifications are:
  • High sensitivity (140 mV/V/mT)
  • ±0.5 mT linear range
  • Highly linear output (typ. 2% of full scale)
  • Low temperature coefficient of output (0.1%/°C)
  • 100 kHz frequency bandwidth
  • 2 megohm typ. device resistance for low power
  • Operation to near-zero supply voltage
  • Up to 125 °C operating temperature
  • 2.5 x 2.5 mm DFN6 package

Part Number:
ALT521-10E
Quantity in Stock:
5000

$8.94

ASR002-10E: Smart SPI TMR Angle Sensor, TDFN6

ASR002 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR002-10E provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

A four-wire SPI interface provides angle data and allows setting device parameters.

The ASR002 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR002-10E
Quantity in Stock:
49

$8.98

ASR012-10E: Smart I²C TMR Angle Sensor, TDFN6

ASR012 TMR Smart Angle Sensors provide a precise digital indication of magnetic rotation operating over a wide range of speeds.

The sensor combines a precise, low-power Tunneling Magnetoresistance (TMR) sensor with sophisticated digital signal processing.

The ASR012 provides an extraordinary combination of speed and precision, with a 12.5 kSps sample rate and ±0.2° repeatability.

The sensor is factory calibrated, with coefficients stored in internal memory.

An I²C interface provides angle data and allows setting device parameters. A PWM output is also provided

The ASR012 is designed for harsh industrial or automotive environments with ESD protection and full −40°C to +125°C operating temperature range.

Part Number:
ASR012-10E

$8.98

ASR022-10E: ABZ Noncontact TMR Encoder Sensor, TDFN6

ASR022 noncontact TMR encoder sensors provide precise pulses indicating angular motion, and is more accurate and smaller than other non-contact encoders.

An ABZ interface allows the ASR022 to replace legacy optical encoders.

The sensor combines precise, low-power Tunneling Magnetoresistance (TMR) sensing elements with sophisticated digital signal processing.

The sensor is factory calibrated, with coefficients stored in internal memory.

The ASR022 is designed for harsh industrial or automotive environments with ESD protection, and full −40 °C to 125 °C operating temperature range.

Part Number:
ASR022-10E
Quantity in Stock:
713

$8.98

Displaying 1 to 11 (of 11 products)