Boards and Magnets

Displaying 1 to 20 (of 26 products)
AG957-06E: Bare breakout board for ASR0xx Smart Angle Sensors

The AG957-06E provides easy connections to an ASR-Series Smart Angle Sensor (sensors sold separately). In addition a spot for the sensor, the board has a spot for a bypass capacitor and a header to connected to the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG957-06E
Quantity in Stock:
11

$2.25

AG954-07E: TDFN6 Socket Board

The AG954-07E provides a socket for easy programming and prototyping of TDFN6 devices without soldering and unsoldering.

The custom socket is compatible with NVE's 2.5 mm x 2.5 mm TDFN6 package parts (-10E suffixes).

The board is 1.5" x 2" (38 mm x 50 mm), and uses brass hardware to minimize magnetic interference with the socketed sensor.
A 0.1"-spaced header provides for connections to the sensors, and a row of 0.1"-spaced through-holes allows for auxiliary parts such as a decoupling capacitor or an LED.

Part Number:
AG954-07E

$129.00

AG919-06: MSOP8 PCB (2" x 0.25"; cross-axis orientation)

The AG919-06 is a 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; order sensors separately). The MSOP8 is rotated 90 degrees compared to the AG918-06.

Part Number:
AG919-06
Quantity in Stock:
6

$4.25

AG918-06: MSOP8 Printed Circuit Board (2" x 0.25")

A 2 x 0.25 inch (50 x 6 mm) PCB designed to be used with MSOP8 sensors (-00E package; purchase sensors separately).

This PCB is also included in the AG910-07 and AG911-07 Sensor Evaluation Kits.

Part Number:
AG918-06
Quantity in Stock:
546

$4.25

AG915-06: MSOP8 Printed Circuit Board (0.25" octagonal)

A 0.25-inch (6 mm) octagonal PCB for easy connections to MSOP8 sensors (-00E suffix; order sensors separately).

The PCB provides through holes for #28 or #30 wires.

Part Number:
AG915-06
Quantity in Stock:
822

$2.25

AG904-06: DFN4 General-Purpose PCB

A 1.2 x 0.25 inch x 0.031 inch thick (30 x 6 x 0.75 mm) PCB for demonstrating 1.1 x 1.1 mm DFN4/ULLGA sensors (-14E sensor suffix; order sensors separately).

Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.

Part Number:
AG904-06
Quantity in Stock:
221

$5.00

AG039-06: DFN4 Digital Sensor Demonstration Bare Board

A 1.57 x 0.25 inch PCB for demonstrating 1.1 x 1.1 mm DFN4/ULLGA sensors such as AHLxxx-14E, ADLxxx-14E, and ALT0xx-14E, (order sensors separately). In addition to space for the sensor, the boards have locations for 0402-size pull-up resistors and bypass capacitors.

Note that since these boards use very small sensors, they require reflow or hot-air soldering techniques.

Part Number:
AG039-06
Quantity in Stock:
465

$5.00

AG035-06: TDFN6 Printed Circuit Board

The AG035-06 Printed Circuit Board (PCB) is a 1.57 x 0.25 inch (40 x 6 mm) PCB for connection to 2.5 x 2.5 mm TDFN6 sensors (-10E suffix sensors; order sensors separately).

Part Number:
AG035-06
Quantity in Stock:
711

$4.25

AG005-06: SOIC8 Printed Circuit Board (0.5" square)

The AG005-06 Printed Circuit Board is a 0.5 x 0.5 inch (13 x 13 mm) PCB with SOIC8 solder pads and through holes for wires or a connector. The PCB allows easy connections to AA-Series SOIC8 sensors (-02E suffix; order separately).

This PCB is also included in the AG001-01 Analog Sensor Evaluation Kit.

Part Number:
AG005-06
Quantity in Stock:
627

$2.25

AG004-06: SOIC8 Printed Circuit Board (3" x 0.3")

A 3 x 0.3 inch (76 x 8 mm) PCB to demonstrate AA-Series SOIC sensors (-02E suffix; order sensors separately).

This PCB is also included in the AG001-01 Sensor Evaluation Kit.

Part Number:
AG004-06
Quantity in Stock:
1317

$4.25

12592: 5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET500-00E 5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12592

$30.00

12591: 2 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET200-00E 2 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12591

$30.00

12590: 1 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET100F-00E 1 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12590

$30.00

12589: 0.5 mm pitch magnetic linear scale tape, 1 x 20 cm

This magnetic scale tape is designed to be used with AET050F-00E 0.5 mm pitch linear sensor. 1 cm (0.4 inches) wide by 20 cm (8 inches) long.

Part Number:
12589
Quantity in Stock:
2

$30.00

12546: Holder for 4 mm dia. disk magnet

A machined-aluminum magnet holder for 4 mm dia. magnets such as part number 12526 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12546
Quantity in Stock:
3

$70.00

12545: Holder for 8 mm dia. disk magnet

A machined-aluminum magnet holder for 8 mm dia. magnets such as part numbers 12527 and 12528 (sold separately).

Compatible with AG93x-Series and AG956 Evaluation Kits for AAT, ADT, and ASR-Series angle and rotation sensors.

Outside dimensions 11 mm dia. x 22 mm tall, with a 6-32 threaded mounting hole. Includes 0-80 set screws, set-screw Allen wrenches, a nylon knob, and a clock hand to track rotation.

Part Number:
12545
Quantity in Stock:
3

$70.00

12528: 8 mm Dia. x 8 mm Thick Diametrically-Magnetized Magnet

The 12528 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12528
Quantity in Stock:
903

$1.19

12527: 8 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

The 12527 is diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12545 magnet holders.

Part Number:
12527
Quantity in Stock:
923

$1.19

12526: 4 mm Dia. x 4 mm Thick Diametrically-Magnetized Magnet

A diametrically-magnetized for use with angle and rotation sensors. The magnet material is C5/Y25 ferrite or similar.

Can be used with 12546 magnet holders.

Part Number:
12526
Quantity in Stock:
885

$0.99

12426: Split-Pole Round Horseshoe Magnet

The 12426 is a split-pole Alnico-5 round horseshoe magnet, ideal for use with AAT-Series angle sensors.

The magnet is 11 mm diameter by 11 mm tall, with a 3.7 mm hole through the center for a variety of mounting options.


Typical field strength is 1100 Oe at the magnet face and thirty oersteds 12mm away. This magnet's strength allows a large airgap between the magnet and the sensor.

This magnet is included in our angle sensor evaluation kits.

Part Number:
12426
Quantity in Stock:
626

$8.95

Displaying 1 to 20 (of 26 products)