Sensor Evaluation Kits

Displaying 1 to 20 (of 50 products)
ALT023-10E-EVB01: 0-1 mT TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT023-10E high sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT023-10E-EVB01
Quantity in Stock:
61

$19.95

ALT021-10E-EVB02: 0-0.25 mT TMR eval board w/amplifier

A 0.5 x 0.3 inch (13 x 8 mm) evaluation board with the ALT021-10E ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a sensor and a 5x amplifier to provide a 2.5 V/V/mT output.

The board can be powered by a 0.9 to 7 V power supply or battery and provides a linear, single-ended output.

Part Number:
ALT021-10E-EVB02
Quantity in Stock:
47

$49.95

ALT021-10E-EVB01: 0-0.25 mT TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT021-10E ultrahigh sensitivity Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT021-10E-EVB01
Quantity in Stock:
41

$19.95

AG956-07E: ASR002-10E Smart SPI Angle Sensor Evaluation Kit

The AG956-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable ASR002-10E Smart Angle Sensor. The kit includes:
    • An evaluation board with:
          - an ASR002-10E sensor
          - a diametrical magnet
          - magnet fixturing and a

    • An interface board with:
          - a microcontroller connected to the sensor via SPI
          - flexibility to power from USB or external power supply
          - isolated USB interface for safety and low noise.

    • A powerful, intuitive graphical user interface.

    • Simple software installation.

    • USB cable to connect the Evaluation Board to a computer.

Part Number:
AG956-07E
Quantity in Stock:
32

$195.00

AG040B: ADL021 Battery-Powered Nanopower Sensor Demonstration Board

This kit includes a demo board with the ultraminiature, ultralow-power ADL021 magnetic switch. An LED shows the sensor output. The board is powered by a three-volt lithium coin cell (included), and the sensor quiescent power consumption is so low that the battery will last indefinitely. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Sensor quiescent current is only 100 nA typical; the sensor operate point is 20 Oe; and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040B
Quantity in Stock:
31

$19.95

AAH002-02E PCBA: Ultrahigh Sensitivity Analog Sensor Assembly

A preassembled circuit board with a high-sensitivity AAH002-02E sensor and a differential amplifier circuit with a gain of 25. The board can be powered by a 2.7 to 12 V supply and provides a single-ended output with a typical sensitivity of 3.75 V/V/mT (375 mV/V/Oe).The circuit board is 12.5 x 7.8 mm, with Vcc, GND, and OUT plated-through holes for wires or a header.

Part Number:
AAH002-02E PCBA
Quantity in Stock:
27

$150.00

AG040C: ADL021 Externally-Powered Nanopower Sensor Evaluation Board

This kit includes an evaluation board with the ultraminiature, ultralow-power ADL021 magnetic switch. The board has a digital output, and can be powered from a 3.3-volt nominal supply. An LED shows the output. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. Typical sensor quiescent current is only 100 nA, the sensor operate point is 20 Oe, and the sensors are 1.1 mm x 1.1 mm. These miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040C
Quantity in Stock:
27

$16.95

AG931-07E: AAT003 40 KOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT003-10E 40 kilohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT003-10E Angle Sensor's 20 kilohm output impedance is ideal for direct interface to microcontrollers.

Part Number:
AG931-07E
Quantity in Stock:
22

$75.00

AG961-07E: SM125 Smart GMR Magnetometer breakout board w/connector

The AG961-07E provides easy connections to an SM125-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG961-07E
Quantity in Stock:
22

$24.95

AG951-07E: SM324-10E Smart TMR Magnetometer Evaluation Kit

The AG951-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the remarkable SM324-10E Smart TMR Magnetometer. The kit includes:
    • An evaluation board with:
          - an SM324-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A powerful, intuitive graphical user interface.
    • Simple software installation.
    • Flexibility to power from USB or an external power supply.
    • Isolated USB interface for safety and noise minimization.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG951-07E
Quantity in Stock:
21

$245.00

AG965-07E: AET500-02E TMR Linear Sensor Demo Kit

The AG965-07E demonstration kit showcases micron precision with an AET500-02E sensor. The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB   • An AET500-02E 5 mm pole-pitch sensor
  • A four digit position display
  • Part #12592 5mm pole pitch magnetic tape
  • 3-D printed fixturing
  • LEDs for pole detected
  • Powered by three AAA batteries (included)

Part Number:
AG965-07E
Quantity in Stock:
20

$195.00

AG930-07E: AAT001 1.25 MOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT001-10E 1.25 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture.

Part Number:
AG930-07E
Quantity in Stock:
19

$70.00

AG974-07E: ACT001-10E Isolated Current Sensor Evaluation Board

This 2” x 2” square evaluation board allows you to test the remarkable ACT001-10E current sensor and a common application circuit.

The ACT001-10E is a fully-isolated, inline current sensor with an on-chip current strap. A Wheatstone bridge manufactured with NVE’s state-of-the-art tunneling magnetoresistance (TMR) sensor elements detects the magnetic field from the input current across NVE’s unique polymer isolation barrier.

Part Number:
AG974-07E
Quantity in Stock:
19

$50.00

ALT025-10E-EVB01: 0-10 mT DFN6 TMR magnetometor eval board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT025-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V power supply and provides a linear, differential output voltage.

Part Number:
ALT025-10E-EVB01
Quantity in Stock:
19

$19.95

AG967-07E: ASR022 ABZ Smart TMR Encoder Sensor breakout board

The AG967-07E provides easy connections to an ASR022-10E ABZ TMR Encoder Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG967-07E
Quantity in Stock:
14

$19.95

AG911-07E: GMR Switch Evaluation Kit

AG911-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. A magnet and circuit boards for mounting the parts are included.

Part Number:
AG911-07E
Quantity in Stock:
11

$65.00

AG932-07E: ADT002 Rotation Sensor Evaluation Kit

The kit includes a circuit board with an ADT002 low hysteresis, ultralow-power rotation sensor, a split-pole magnet that can be turned, and simple circuitry to drive LEDs from the sensor outputs. Two LEDs follow the sensor outputs; four others indicate the rotational quadrant. A 3-volt coin cell (included) powers the board.

Part Number:
AG932-07E
Quantity in Stock:
11

$90.00

AG910-07E: GMR Switch Evaluation Kit w/ZIF socket

AG910-07 kit includes several MSOP GMR Switches with different magnetic operate points and different output options such as current sink and current source. Magnets, circuit boards for mounting the parts, and a zero insertion force (ZIF) socket are also included.

Part Number:
AG910-07E
Quantity in Stock:
10

$90.00

AG952-07E: SM124-10E Smart GMR Magnetometer Evaluation Kit

The AG952-07 Evaluation Kit has everything you need to calibrate, test, and evaluate the easy-to-use SM124-10E Smart Magnetometer. The kit includes:
    • A 1" x 1.6" (25 mm x 41 mm) evaluation board with:
          - an SM124-10E sensor.
          - a microcontroller connected to the sensor via I²C.
          - a current-carrying trace under the sensor for evaluating as a current sensor.
    • A simple, intuitive graphical user interface.
    • Simple software installation.
    • USB cable to connect the Evaluation Board to a computer.
    • A small ceramic magnet for evaluating as a proximity sensor.

Part Number:
AG952-07E
Quantity in Stock:
10

$95.00

AG958-07E: SM124 Smart GMR Magnetometer breakout board w/connector

The AG958-07E provides easy connections to an SM124-10E Smart GMR Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. A connector is provided to connect the board to the AG955-07E Self-Contained SM124/SM125 Programmer or customers' own boards. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG958-07E
Quantity in Stock:
9

$24.95

Displaying 1 to 20 (of 50 products)