Sensor Evaluation Kits

Displaying 61 to 80 (of 83 products)
SM225-10E-EVB01: SPI 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM225-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use SPI interface.

Part Number:
SM225-10E-EVB01
Quantity in Stock:
49

$19.95

AA004-00E-EVB01: 5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-00E 5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA004-00E-EVB01
Quantity in Stock:
50

$19.95

AA004-02E-EVB01: 5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA004-02E 5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA004-02E-EVB01
Quantity in Stock:
50

$19.95

AA005-02E-EVB01: 10 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA005-02E 10 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA005-02E-EVB01
Quantity in Stock:
50

$19.95

AA006-00E-EVB01: 5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA006-00E 5 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-00E-EVB01
Quantity in Stock:
50

$19.95

AA006-02E-EVB01: 5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AA006-02E 5 mT saturation, low-power GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 24 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AA006-02E-EVB01
Quantity in Stock:
50

$19.95

AAH002-02E-EVB01: 1 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAH002-02E ultrahigh-sensitivity 0.6 to 3 mT linear range GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAH002-02E-EVB01
Quantity in Stock:
50

$19.95

AAH004-00E-EVB01: 1.5 mT MSOP8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAH004-00E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAH004-00E-EVB01
Quantity in Stock:
50

$19.95

AAL002-02E-EVB01: 1.5 mT SOIC8 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAL002-02E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAL002-02E-EVB01
Quantity in Stock:
50

$19.95

AAL004-10E-EVB01: 1.5 mT DFN6 GMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAL004-10E 1.5 mT saturation GMR analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 12 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AAL004-10E-EVB01
Quantity in Stock:
50

$19.95

ACT001-10E-EVB01: 500 mA DFN6 TMR Current Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ACT001-10E TMR analog bridge current sensor. The sensor has an on-chip current strap for precise operation.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 14 V supply and provides a differential output voltage proportional current.

Part Number:
ACT001-10E-EVB01
Quantity in Stock:
50

$19.95

AKT001-14E-EVB01: 1.5 T DFN4 TMR Magnetometor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AKT001-14E high-field (1.5 T), low power TMR analog bridge magnetometer. The sensor is an ultraminiature 1.1 x 1.1 mm package.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides a differential output voltage proportional to the applied magnetic field.

Part Number:
AKT001-14E-EVB01
Quantity in Stock:
50

$19.95

ALT023-10E-EVB02: 1A TMR Current Sensor Evaluation Board

This evaluation board measures zero to one amp with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.

The board has a sensor plus screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.

The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.

The board measures 0.9" x 0.5" x 0.063" (22 x 12 x 1.6 mm)

Part Number:
ALT023-10E-EVB02
Quantity in Stock:
50

$24.95

ALT023-10E-EVB03: 7A TMR Current Sensor Evaluation Board

This evaluation board measures zero to seven amps with just four connections--two for the power supply and two for a differential output. The board is based on the revolutionary ALT023-10E TMR magnetometer, which is ideal for noncontact current sensing. The current-over-trace configuration provides inherent isolation and is more efficient than a shunt.

The board has a sensor plus screw terminals for current connections, a standard 0.1-inch header for sensor connections, and a 1 mm pitch card-edge connector.

The board comes with a business-card size guide with pinouts and specifications. A QR code provides a link to the sensor datasheet.

The board measures 0.9" x 0.5" x 0.063" (22 x 12 x 1.6 mm)

Part Number:
ALT023-10E-EVB03
Quantity in Stock:
50

$24.95

SM223-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM223-10E-EVB01
Quantity in Stock:
50

$19.95

SM223-10E-EVB02: I2C 1.5 mT TMR Smart Current Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) noncontact current sensor evaluation board with the SM223-10E 0 to 1.5 mT Smart TMR magnetometer sensor configured over a current-sensing circuit board trace. The board has a pre-soldered sensor, screw terminals for the current trace, a standard 0.1" (2.54 mm) header, and a 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and provides an easy-to-use I2C interface as well as a magnetic threshold output.

Part Number:
SM223-10E-EVB02
Quantity in Stock:
50

$19.95

SM228-10E-EVB01: I2C 1.5 mT TMR Smart Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the SM228-10E 0 to 1.5 mT Smart TMR magnetometer sensor. The board has a pre-soldered sensor, a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 2.2 to 3.6 V supply and has an easy-to-use I2C interface and a digital threshold output.

Part Number:
SM228-10E-EVB01
Quantity in Stock:
50

$19.95

ALT521-10E-EVB01: Ultrasensitive Two-Axis Rotational Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT521-10E 2 MOhm Tunneling Magnetoresistance (TMR) Ultrasensitive Two-Axis Rotational Sensor.

The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.

Part Number:
ALT521-10E-EVB01
Quantity in Stock:
52

$19.95

ALT026-10E-EVB01: 0-20 mT DFN6 TMR magnetometor breakout board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ALT026-10E Tunneling Magnetoresistance (TMR) analog bridge magnetometer. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 10 V supply and provides a linear, differential output voltage.

Part Number:
ALT026-10E-EVB01
Quantity in Stock:
55

$19.95

ADT005-10E-EVB01: TMR Rotation Sensor Breakout Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the ADT005-10E ultralow power quadrant rotation sensor. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine digital quadrature outputs.

Part Number:
ADT005-10E-EVB01
Quantity in Stock:
57

$19.95

Displaying 61 to 80 (of 83 products)