Sensor Evaluation Kits

Displaying 1 to 20 (of 50 products)
AG040T: ADT923 3V Battery-Powered TMR Switch Demonstration Board

The AG040T Demonstration Board has an ADT923 TMR magnetic switch powered by a three-volt lithium coin cell (included). An LED to show the sensor output. The sensor’s low quiescent power allows the battery to last at least several years with occasional LED use. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The sensors are 1.1 mm x 1.1 mm x 0.35 mm, and these miniature evaluation boards are just 0.25 x 1.57 inches (6 x 40 mm).

Part Number:
AG040T

$19.95

AG905-07E: ALT025 High Current PCB Demonstration

This demonstration features the ALT025 low hysteresis, high-speed TMR magnetometer and a high current PCB layout, optimized for the detection of +/- 200 amps. The board has sturdy screw terminal connections for current input, and it has header pins for sensor power and output.

Part Number:
AG905-07E

$75.00

AG921-07E: AKL001 Gear-Tooth Sensor Demonstrator

A self-contained demonstrator for NVE’s unique AKL digital gear tooth sensor.The battery-powered demonstrator (battery included) is based on an AKL001 sensor. The demonstrator also includes a circuit board with an LED and driver, a biasing magnet, and a gear that can be turned by hand. No assembly required. Dimensions 3" x 3" x 1.5".

Part Number:
AG921-07E

$90.00

AG933-07E: AAT009 6 MOhm Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT009-10E 6 megohm Angle Sensor and a unity-gain buffer amplifier. The circuit board can be powered with a 1.7 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT009-10E Angle Sensor has ultra-ultra low power consumption and is ideal for long-term battery-powered operation or operation from harvested power.

Part Number:
AG933-07E

$75.00

AG954-07E: TDFN6 Socket Board

The AG954-07E provides a socket for easy programming and prototyping of TDFN6 devices without soldering and unsoldering.

The custom socket is compatible with NVE's 2.5 mm x 2.5 mm TDFN6 package parts (-10E suffixes).

The board is 1.5" x 2" (38 mm x 50 mm), and uses brass hardware to minimize magnetic interference with the socketed sensor.
A 0.1"-spaced header provides for connections to the sensors, and a row of 0.1"-spaced through-holes allows for auxiliary parts such as a decoupling capacitor or an LED.

Part Number:
AG954-07E

$129.00

AG955-07E: Self-Contained SM12x Programmer

This self-contained module allows zeroing and programming the digital output threshold and hysteresis or SM124-10E or SM125-10E Smart Magnetometer without need of a computer or a customer microcontroller.

The 2.5" x 2.5" (64 mm x 64 mm) board has an I²C master microcontroller connected to the SM124.

A pushbutton for zeros the sensor, and miniature rotary thumbwheel switches provide three digits of resolution for the threshold and two for hysteresis. A custom TDFN-6 socket accommodates the 2.5 mm x 2.5 mm SM12x-10E. The module is powered by a small wall-mounted power supply (included).

Jumpers allow the sensor to be disconnected from the rest of the board so the board can be used as an interface to the customer’s electronics.

This module includes:

    • A 2.5 x 2.5 mm TDFN6 socket for a SM12x-10E Smart Magnetometer

    • A preprogrammed, onboard microcontroller

    • Two sets of thumbwheel switches for digital threshold and hysteresis

    • Two LEDs indicating the sensor’s output and successful programming

    • A 5-volt wall-mount power supply

Sensors are sold separately.

Part Number:
AG955-07E

$195.00

AG970-07E: AET-Series TMR Linear Sensor Eval Kit

The AG970-07E Evaluation Kit helps test a variety AET-Series sensors with linear magnetic scales. The kit includes:   • All five AET-Series parts (unsoldered in tubes)
  • A 3 x 4-inch (76 x 101 mm) PCB with test points and screw terminals
  • Detachable fixturing for linear magnetic tape (tape sold separately)

Part Number:
AG970-07E

$65.00

AG975-07E: SM223 1.5 mT I2C Smart TMR Magnetometer Breakout Board

The AG975-07E provides easy connections to an SM223-10E high-sensitivity Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG975-07E

$19.95

AG976-07E: ASR003-10E Smart SPI Angle Sensor Evaluation Kit

The AG976 demonstration board includes an ASR003-10E sensor, a diametrical magnet, magnet fixturing, and an interface board with a microcontroller. Four variable-brightness LEDs show the magnetic field strength in each direction.

Easy-to-install Windows software provides a graphical user interface showing the sensor output and allowing sensor parameters to be programmed.

Part Number:
AG976-07E

$195.00

AG934-07E: AAT101 Full-Bridge Angle Sensor Evaluation Kit

The kit includes a circuit board with an AAT101-10E Full-Bridge Angle Sensor, which provides two differential analog outputs, 90 degrees out of phase. The circuit board can be powered with a 0 V to 5.5 V power supply. An angular reticle on the circuit board aids in characterizing output versus angle. The kit also includes a split-pole magnet and a plastic magnet locating fixture. The AAT101-10E Angle Sensor typical output amplitude is 400 mV/V peak-to-peak for each output.

Part Number:
AG934-07E
Quantity in Stock:
1

$75.00

AG968-07E: SM228 15 mT I2C Smart TMR Magnetometer Breakout Board

The AG968-07E provides easy connections to an SM228-10E Smart Magnetometer. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.6 by 0.75 inches (15 x 19 mm).

Part Number:
AG968-07E
Quantity in Stock:
1

$19.95

AG972-07E: ABT375 TMR Gear-Tooth Sensor Demo Kit

The AG972-07E Demonstration Board showcases rotational encoding to a few thousandths of a degree with an ABT375-00E sensor and a 30-tooth gear.

The kit includes:
  • A 3 x 5-inch (76 x 127 mm) PCB
  • An ABT375-00E gear tooth sensor
  • An eight-digit rotational display
  • a 30-tooth. 0.5 module gear
  • Part #12216 ceramic bias magnet
  • Test points for analog outputs
  • Powered by two AAA batteries (included)

Part Number:
AG972-07E
Quantity in Stock:
1

$195.00

AG001-01E: GMR Analog Sensor Evaluation Kit

The AG001-01E GMR Analog Sensor Evaluation Kit is designed for experimentation and development. The kit contains an assortment of 14 NVE analog sensors plus several printed circuit boards and various permanent magnets. It includes the high-sensitivity AAH002 sensor. The kit contains only RoHS compliant parts.

Part Number:
AG001-01E
Quantity in Stock:
2

$60.00

AG903B-07E: 0.75A/5A/50A GMR Current Sensor Evaluation Kit

The evaluation board includes three sensor over current-trace modules with three AAL024-10E TDFN current sensors.

The board measures 1.565" x 2.915" (40 mm by 74 mm), and includes three separable modules. The three modules are optimized to measure currents of 0-0.75A, 0-5A, and 0-50A.

Part Number:
AG903B-07E
Quantity in Stock:
2

$75.00

AG935-07E: 60-LED "Blinky" AAT003 Angle Sensor Demo Board

This kit includes a 5-inch by 5-inch circuit board with an AAT003 Angle Sensor, 60 multicolor smart LEDs (6° spacing) to indicate rotation angle, and a preprogrammed, onboard ATtiny microcontroller. The microcontroller also provides a PWM angle output. The board is factory calibrated and can optionally be field calibration. A split-pole magnet, a magnet locating fixture, and a 5-volt wall mount power supply module are also included. The board comes preprogrammed, but the Arduino compatible software is available on Github/NveCorporation so you can use the routines in your own application.

Part Number:
AG935-07E
Quantity in Stock:
2

$150.00

AG953H-07E: SM225-10E Bussbar Current Sensor Demonstration

The AG953H-07 demonstrates high current measurement with the SM225-10E Smart TMR Magnetometer. A 1/4" x 1/2" busbar is mounted to the PCB, and the sensor can detect up to +/-650 amps. Based on the AG953-07E Evaluation Kit, a powerful, intuitive graphical user interface allows the user to control sensor offset, calibration, filtering, and memory.

Part Number:
AG953H-07E
Quantity in Stock:
2

$129.00

AG957-07E: ASR002 Smart TMR Angle Sensor breakout board

The AG957-07E provides easy connections to an ASR002-10E TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG957-07E
Quantity in Stock:
2

$19.95

AG964-07E: ASR022-10E ABZ TMR Encoder Sensor Demo Kit

The AG964-07E Demonstation Board has everything you need to evaluate the remarkable ASR022-10E ABZ TMR Encoder Sensor. The demonstration includes:
    • ASR022-10E ABZ Noncontact TMR Encoder Sensor
    • A four-digit display to indicate rotation
    • Part # 12426 split-pole Alnico 5 round horseshoe magnet
    • LEDs for A, B, Z, and Direction outputs
    • Plastic magnet locating fixture
    • Powered by two AAA batteries (included)

Part Number:
AG964-07E
Quantity in Stock:
2

$195.00

AG966-07E: ASR012 I2C/PWM Smart TMR Angle Sensor breakout board

The AG966-07E provides easy connections to an ASR012-10E I2C/PWM TMR Smart Angle Sensor. In addition to the sensor, the board has a recommended bypass capacitor and a six-pin header connected to each of the sensor I/O pads. The board is approximately 0.5 by 0.6 inches (12 x 15 mm).

Part Number:
AG966-07E
Quantity in Stock:
2

$19.95

AG941-07E: ADL-Series Sensor Demo Board

The kit includes a demo board with three ultraminiature, ultralow-power ADL-Series magnetic sensors. Each sensor drives an indicator LED, and a meter shows the sensor power in microamps or nanoamps. A miniature bar magnet is included so you can see for yourself how these remarkable sensors work. The evaluation boards are 3.75 x 5 inches (95 x 127 mm), and are powered by a coin cell (included).

Part Number:
AG941-07E
Quantity in Stock:
3

$90.00

Displaying 1 to 20 (of 50 products)